Sony CMT-CPZ3 / HCD-CPZ3 Service Manual ▷ View online
HCD-CPZ3
9
2-9. LEVER (LOADING-L/R)
3 two hooks
5 two hooks
4 lever (loading-L)
6 lever (loading-R)
SPR-T (loading-R)
SPR-T (loading-L)
1
2
PRECAUTION DURING LEVER (LOADING-R / L) INSTALLATION
lever (loading-R)
Align the horizontal position.
lever (loading-L)
Install the both levers so that they move symmetrically.
HCD-CPZ3
10
2-10. LEVER (DISC SENSOR), LEVER (DISC STOP)
2-11. DRIVER BOARD, MOTOR ASSY (LOADING) (M701)
chassis (top)
hole
Install the lever (disc stop) so that the both holes
are aligned.
hole
1 gear (cap)
3 two claws
5 two hooks
6 lever (disc stop)
lever (disc stop)
4 lever (disc sensor)
PRECAUTION DURING LEVER (DISC STOP) INSTALLATION
2 gear (IDL-L)
3 Remove soldering
from the two points.
2 two screws
(BVTP2.6)
4 DRIVER board
5 motor assy (loading)
(M701)
1 belt (MOT)
HCD-CPZ3
11
2-12. BD BOARD
2-13. BU SECTION
1 Remove soldering
from the four points.
5 BD board
3 tape (cushion)
2 flexible flat cable (16 core)
(CN301)
4 wire (flat type) (23 core)
(CN102)
– Bottom view –
4 floating screw
(PTPWH M2.6)
5 floating screw
(PTPWH M2.6)
3 coil spring (holder down B)
6 BU section
1 screw
(BVTP2.6 )
2 lever (CL UP2)
– Bottom view –
HCD-CPZ3
12
2-14. OPTICAL PICK-UP BLOCK (KSM-215DCP)
2-15. LEVER (BU LOCK)
1 two screws
(BTTP M2.6)
4 two floating screws
(PTPWH M2.6)
5 two coil springs (insulator)
3 two coil springs (insulator)
6 two insulators
6 two insulators
7 optical pick-up block
(KSM-215DCP)
2 two stoppers (BU)
– Bottom view –
4 three hooks
2
5 lever (BU lock)
2 gear (cap)
1 floating screw (PTPWH M2.6)
3 gear (BU lock)
– Bottom view –
Click on the first or last page to see other CMT-CPZ3 / HCD-CPZ3 service manuals if exist.