Sony BDV-IS1000 / BDV-IT1000 / BDV-IT1000ES / HCD-IS1000 / HCD-IT1000 Service Manual ▷ View online
HCD-IS1000/IT1000/IT1000ES
9
DISC REMOVAL PROCEDURE IF THE TRAY CANNOT BE EJECTED (FORCED EJECTION)
1. Remove the BD drive (BPD-200). (Refer to DISASSEMBLY “3-9. BD DRIVE (BPD-200)” (page 15))
2. Insert a clip etc. in the hole of a drive and open a tray.
1. Remove the BD drive (BPD-200). (Refer to DISASSEMBLY “3-9. BD DRIVE (BPD-200)” (page 15))
2. Insert a clip etc. in the hole of a drive and open a tray.
BD drive
clip etc.
tray
fuse
rear panel block
METHOD OF FUSE REPLACING
1. Remove the top assy. (Refer to DISASSEMBLY “3-2. TOP ASSY” (page 12))
2. Remove covers (rear_L/R).
3. Remove the rear panel block.
1. Remove the top assy. (Refer to DISASSEMBLY “3-2. TOP ASSY” (page 12))
2. Remove covers (rear_L/R).
3. Remove the rear panel block.
HCD-IS1000/IT1000/IT1000ES
10
SECTION 2
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
" / (on/standby)
Turns on the unit, or sets to standby mode.
# Soft-touch buttons
These buttons work by touching lightly
around the printed area or projecting part.
Do not press them strongly.
around the printed area or projecting part.
Do not press them strongly.
) (play)
Starts or re-starts playback.
Plays a slideshow when a disc containing
JPEG image files is inserted.
Plays a slideshow when a disc containing
JPEG image files is inserted.
Y (stop)
Stops playback and remembers the stop
point (resume point).
The resume point for a title/track is the last
point you played or the last photo for a
photo folder.
point (resume point).
The resume point for a title/track is the last
point you played or the last photo for a
photo folder.
FUNCTION
Selects the playback source.
VOLUME +/–
Adjusts the system’s volume.
" (open/close)
Opens or closes the disc tray.
$ S-AIR indicator
Lights up when the S-AIR transceiver is
inserted in the unit and the system transmits
the sound.
inserted in the unit and the system transmits
the sound.
% HDMI indicator
Lights up when the HDMI OUT jack is
correctly connected to HDCP (High-
bandwidth Digital Content Protection)
compliant device with HDMI or DVI
(Digital Visual Interface) input.
correctly connected to HDCP (High-
bandwidth Digital Content Protection)
compliant device with HDMI or DVI
(Digital Visual Interface) input.
& DISC indicator
Flashing: The system is loading a disc.
Lighting up: A disc is loaded. (When no
disc is loaded, the DISC indicator is not lit.)
Lighting up: A disc is loaded. (When no
disc is loaded, the DISC indicator is not lit.)
' Front panel display
( Disc tray
)
(remote sensor)
Front panel
FUNCTION
VOLUME
HDMI
S-AIR
About the indications in the front panel display
" Playing status
# Lights up when a station is received.
(Radio only)
$ Monaural/Stereo effect (Radio only)
% Lights up when the external memory is
recognized.
& Lights up when outputting 720p/1080i/
1080p video signals from the HDMI
OUT jack or 720p/1080i video signals
from the COMPONENT VIDEO OUT
jacks.
OUT jack or 720p/1080i video signals
from the COMPONENT VIDEO OUT
jacks.
' Flashes when the sleep timer is set.
( Displays system’s status such as
chapter, title, or track number, time
information, radio frequency, playing
status, decoding mode, etc.
information, radio frequency, playing
status, decoding mode, etc.
) Lights up when the system is
accessing the network.
* Lights up when outputting 1920 ×
1080p/24Hz video signals.
+ Lights up when the night mode is on.
, Lights up when the HDMI IN1 or 2 jack
is correctly connected to HDCP (High-
bandwidth Digital Content Protection)
compliant device with HDMI or DVI
(Digital Visual Interface) output.
bandwidth Digital Content Protection)
compliant device with HDMI or DVI
(Digital Visual Interface) output.
- Current sound format
Front panel display
DTS HD MSTR
TUNED
MONO
EXT
HD
SLEEP
24P
PL x
NIGHT
NEO:6
HDMI 1 2
ST
96 / 24 LBR
HI RES
D EX
TrueHD
+
–
–
–
ES
DTS
MATRIX
PCM
L
DISCRETE
AAC
D C S
HCD-IT1000/IT1000ES
HCD-IS1000
" LAN (100) terminal
# COMPONENT VIDEO IN (SAT/CABLE)
jacks
$ COMPONENT VIDEO OUT jacks
% VIDEO OUT (VIDEO, S VIDEO) jacks
& HDMI IN1/2 jacks
' IR REMOTE (IN, OUT)
(HCD-IT1000/IT1000ES only)
( DIGITAL IN (TV OPTICAL) jack
) DIGITAL IN (SAT/CABLE OPTICAL,
COAXIAL) jacks
* EZW-RT10 slot
+ AM terminal
, FM 75Ω COAXIAL jack
- HDMI OUT jack
. DMPORT (DIGITAL MEDIA PORT) jack
/ A.CAL MIC jack
0 SAT/CABLE IN (VIDEO, AUDIO R/L)
jacks
1 TV (AUDIO IN R/L) jacks
2 EXTERNAL slot
3 SPEAKER jacks
Rear panel
COAXIAL
OPTICAL
COAXIAL
75
FM
AM
ANTENNA
DIGITAL
HDMI
DMPORT
EZW-RT10
TV
SAT/CABLE IN
E
T
O
M
E
R
R
I
T
U
O
O
E
D
I
V
LAN(100)
EXTERNAL
SPEAKER
SAT/CABLE
COMPONENT VIDEO OUT
COMPONENT VIDEO IN
A.CAL
MIC
SAT/CABLE
TV
IN 1
IN 2
OUT
IN
700mA
MAX
ECM-AC2
AUDIO IN
OUT
IN
AUDIO
VIDEO
Y
Y
P
B
/
P
B
/ C
B
P
R
/ C
R
C
B
P
R
/
C
R
L
R
L
R
DC5V
DC5V
500mA MAX
S-VIDEO
VIDEO
FRONT
R
FRONT
L
CENTER WOOFER
COAXIAL
OPTICAL
COAXIAL
75
FM
AM
ANTENNA
DIGITAL
HDMI
TV
SAT/CABLE IN
EXTERNAL
SPEAKER
SAT/CABLE
COMPONENT VIDEO OUT
COMPONENT VIDEO IN
A.CAL
MIC
SAT/CABLE
TV
IN 1
IN 2
OUT
IN
ECM-AC2
AUDIO IN
AUDIO
VIDEO
Y
Y
P
B
/
P
B
/ C
B
P
R
/ C
R
C
B
P
R
/
C
R
L
R
L
R
DC5V
500mA MAX
S-VIDEO
VIDEO
FRONT
R
WOOFER
1
WOOFER
2
FRONT
L
CENTER
LAN(100)
VIDEO OUT
DMPORT
700mA
MAX
DC5V
EZW-RT10
Ver. 1.1
HCD-IS1000/IT1000/IT1000ES
11
SECTION 3
DISASSEMBLY
• This set can be disassembled in the order shown below.
3-1. DISASSEMBLY FLOW
3-2. TOP
ASSY
(Page
12)
3-3. FRONT PANEL BLOCK
(Page
(Page
12)
3-4. TOP
PLATE
(Page
13)
3-11. AV02 BOARD
(Page
(Page
16)
3-7. HD
BOARD
(Page
14)
3-8 . BRACKET (HD)
(Page
(Page
15)
3-9. BD DRIVE (BPD-200)
(Page
(Page
15)
SET
3-5. DISPLAY
BOARD,
SUB
PANEL
(Page
13)
3-10. AV01 BOARD,
TUNER
TUNER
(FM/AM)
(Page
16)
3-13. BRACKET (EMMA) BLOCK
(Page
(Page
17)
3-12. DD BOARD,
MB-126
MB-126
BOARD
(Page
17)
3-14. P-AMP BOARD
(Page
(Page
18)
3-15. FUSE (F900)
(Page
(Page
18)
3-6. S-AIR CONNECT BOARD,
D-IN
D-IN
BOARD
(Page
14)
HCD-IS1000/IT1000/IT1000ES
12
Note: Follow the disassembly procedure in the numerical order given.
3-2. TOP
ASSY
screw
(BVTP3
× 8)
four screws
(BVTP3
× 8)
four screws
(BVTP3
× 6)
four screws
(BVTP3
× 6)
four screws
(BVTP3
× 6)
top assy
bottom panel
cloth
top assy
Note: Pave the cloth etc. so that the wound should not place
to the top assy when the set is overturned and it resolves it.
four screws
(BVTP3
× 8)
— bottom view —
3-3. FRONT PANEL BLOCK
(IT1000/IT1000ES)
front panel block
claw
claw
claw
wire (flat type) (9 pin)
(CN101)
connector
(CN803)
connector
(CN1851)
two screws
(BVTP3
× 6)
four screws
(BVTP3
× 6)
screw
(BVTP3
× 6)
screw
(BVTP3
× 6)
screw
(BVTP3
× 6)
terminal
Ver. 1.1
Click on the first or last page to see other BDV-IS1000 / BDV-IT1000 / BDV-IT1000ES / HCD-IS1000 / HCD-IT1000 service manuals if exist.