Sharp VC-ME80HM (serv.man7) User Manual / Operation Manual ▷ View online
25
ADVANCED OPERATION
BASIC EDITING
ASSEMBLE EDITING
To cut out unwanted scenes while using the procedure on the previous page press the
PAUSE button on the recording VCR at the start of the unwanted section and again at the
end to resume recording.
INSERT EDIT
1. Switch on the TV and select the video channel.
2. Press INPUT SELECT on the remote control to select the video/audio input, L2 or L3 will
1. Switch on the TV and select the video channel.
2. Press INPUT SELECT on the remote control to select the video/audio input, L2 or L3 will
be displayed on the VCR.
3. Load the source tape into the playback VCR or camcorder ensuring that the record
protection tab has been removed. Search the source tape on the playback VCR or
camcorder for the playback start position and select pause.
camcorder for the playback start position and select pause.
4. Load the tape to be recorded into your VCR, ensure the record protection tab is in place
and that the HiFi Rec Level Control is in its central position.
Search the tape to be recorded for the end of the scene to be replaced and select pause.
5. Press COUNTER RESET .
6. Rewind the tape to the start of the section to be replaced and press PAUSE.
7. Press the INSERT button.
7. Press the INSERT button.
8. To start editing press PAUSE on the recording VCR and PLAY on the playback VCR
simultaneously. When the tape counter reaches 0:00.00 the recording VCR will pause
automatically. Press stop on the playback VCR.
automatically. Press stop on the playback VCR.
NOTE:
●
Ensure auto or manual tracking has been completed on the playback VCR before
commencing editing.
TO REPLACE
PRESS
Picture and
VIDEO INSERT
Hi-Fi sound
V.INSERT appears on the VCR display and on the
TV screen.
Mono sound only
AUDIO INSERT
A.INSERT appears on the VCR display and on the
TV screen.
Picture Hi-Fi and
VIDEO INSERT then AUDIO INSERT
Mono Sound
AV.INSERT appears on the VCR display and on
the TV screen.
NOTE:
●
To use the AUDIO and VIDEO INSERT buttons the VCR must be in playback pause mode.
●
Ensure AUTO or MANUAL tracking has been completed on the playback VCR before
commencing editing.
ME-80 HM 7/12/98 12:16 pm Page 25
26
1. Connect the audio source to the AUDIO IN
L-R terminals on the front of the VCR as
shown above, (A scart connection to L2 can
also be used).
2. Insert the pre-recorded tape into the VCR.
3. Press PLAY/X2 (
) to view the recording.
4. If you wish to listen to the original Hi-Fi track
while you are recording the new inserted
audio track you will need to set AUDIO MIX
to ON in the MODE menu.
5. Press PAUSE/STILL (
) when you reach
the point on the tape where you want audio
insert to start.
6. Press AUDIO INSERT (A.INSERT will be
shown on your TV and on the VCR display.)
7. Press PAUSE/STILL (
) to start audio
insert.
8. Press STOP (
) to finish audio
insert(A.INSERT will disappear from your
TV and on the VCR display)
ADVANCED OPERATION
AUDIO INSERT
4-HEAD / NICAM / IGR Hi-Fi STEREO
STANDBY
GAMMA
SUPER P.
SATELLLITE CONTROL
LINE IN 3
VIDEO
S-VIDEO
INPUT
LANC
Hi-Fi
REC LEVEL
AUDIO
R
L
LOW POWER
+
Connect your audio
equipment to AUDIO IN L-R
terminals on the front of your
VCR.
If a microphone is to
be used, connect it to
your audio equipment.
AUDIO SOURCE
.
RECORDING SOUND ON TO A VIDEO TAPE
This feature enables you to add narration or background music to a pre-recorded tape.
This feature enables you to add narration or background music to a pre-recorded tape.
●
The audio signal will be recorded on the mono track. The Hi-Fi track will remain
unchanged.
unchanged.
II A. INSERT
L 3
S P
ME-80 HM 7/12/98 12:16 pm Page 26
27
➝
AUDIO MIX
ON
OFF
16.9
AUTO
OFF
VCR CODE
1
2
▲ ▼
:SELECT
:CHANGE
SET :ENTER MENU :EXIT
NOTES:
●
Do not start audio insert until AUTO or MANUAL tracking has been completed as the
signal may not be recorded correctly.
signal may not be recorded correctly.
●
Because the audio signal is recorded onto the mono track any previous recording on
this track will be erased.
this track will be erased.
●
If AUDIO MIX in the mode menu is set to OFF, no sound will be heard during audio
insert.
insert.
1.
Press MENU to display the main menu
on the screen.
on the screen.
2.
Press [
] to select MODE.
3.
Press SET.
4.
Press [
] to select AUDIO MIX.
5.
Press [
] to select ON.
6.
Press SET to return to the menu screen.
7.
Press MENU to exit to the normal
screen.
screen.
/
/
/
AUDIO MIX AUDIO OUT MODE VCR DISPLAY
RESULT
Hi-Fi and Mono audio
Original Hi-Fi audio (L&R
CHANNELS) and inserted audio
CHANNELS) and inserted audio
Original Hi-Fi audio (L CHANNEL)
plus inserted audio
plus inserted audio
Original Hi-Fi audio (R
CHANNEL) plus inserted audio
CHANNEL) plus inserted audio
PLAYING BACK AN AUDIO INSERTED TAPE
●
If you want to listen to the original and the new inserted audio signal simultaneously, you
will need to set AUDIO MIX to ON.
will need to set AUDIO MIX to ON.
●
You can change the audio output by pressing the AUDIO OUT button on the remote
control. Refer to the table below.
control. Refer to the table below.
L
R
L
R
ON
MODE MENU SCREEN
ADVANCED OPERATION
AUDIO INSERT
▲
▼
AUDIO MIX SELECTION
ME-80 HM 7/12/98 12:16 pm Page 27
28
Using the LANC connection as illustrated below it will enable you to control the playback
VCR from the recording VCR allowing you to start and stop both units at the same time.
VCR from the recording VCR allowing you to start and stop both units at the same time.
ADVANCED OPERATION
EDITING WITH A LANC CABLE CONNECTION
NOTE:
LANC MODE
This setting determines which VCR controls the other. The recording VCR should be set to M
and the playback VCR set to S.
JOG MODE
This selection is made depending on whether the playback VCR has a JOG SHUTTLE
function or not.
LANC MODE
This setting determines which VCR controls the other. The recording VCR should be set to M
and the playback VCR set to S.
JOG MODE
This selection is made depending on whether the playback VCR has a JOG SHUTTLE
function or not.
ON if the playback VCR has a JOG SHUTTLE function.
OFF if the playback VCR does not have a JOG SHUTTLE function.
OFF if the playback VCR does not have a JOG SHUTTLE function.
●
To protect the tape from unnecessary wear the VCR will readjust the tape position if the
Frame Advance/Reverse feature is used repeatedly.
Frame Advance/Reverse feature is used repeatedly.
EDIT MODE SELECTION
Press MENU to display the main menu on the screen. The main menu has FIVE options
including EDIT MODE.
including EDIT MODE.
To access the edit mode menu highlight EDIT MODE using the [
] buttons, then press
SET.
Highlight the options to be changed using the [
Highlight the options to be changed using the [
] buttons. Press [
] to select
M/S or ON/OFF as appropriate, press SET then MENU to return to the normal screen.
/
/
/
4-HEAD / NICAM / IGR Hi-Fi STEREO
LINE IN 3
VIDEO
S-VIDEO
INPUT
LANC
Hi-Fi
REC LEVEL
AUDIO
R
L
4-HEAD / NICAM / IGR Hi-Fi STEREO
LINE IN 3
VIDEO
S-VIDEO
INPUT
LANC
Hi-Fi
REC LEVEL
AUDIO
R
L
VCR with LANC Terminal
VCR with LANC Terminal
Camcorder with
LANC Terminal
LANC Terminal
To LANC Terminal
2.5mm
2.5mm
OR
ME-80 HM 7/12/98 12:16 pm Page 28
Click on the first or last page to see other VC-ME80HM (serv.man7) service manuals if exist.