Sharp VC-M333 (serv.man7) User Manual / Operation Manual ▷ View online
10
If problems persist contact the SHARP Helpline on tel: 0990-274277
BASIC OPERATION
HOW TO PLAYBACK A VIDEO TAPE
FAST FORWARDING/REWINDING A VIDEO TAPE
1.
Press
STOP
(
) to stop the video tape.
2.
Press
FAST FORWARD
(
)/
REWIND
(
) on the remote control or rotate the
shuttle dial clockwise for Fast Forward and counter clockwise for Rewind then release.
3.
To stop fast forward/rewind, press
STOP
(
).
FORWARD/REVERSE VISUAL SEARCH
Visual Search can be operated during playback by either the Fast Forward/Rewind buttons
on the remote control or by using the shuttle dial on the VCR front panel.
Remote Control Operation
1.
Press
FAST FORWARD
(
)/
REWIND
(
) during playback.
2.
To decrease the speed, press
FAST FORWARD
(
)/
REWIND
(
) again.
3.
Press
PLAY/X2
(
) to resume playback.
OR: Shuttle Dial Operation
As the Shuttle dial is rotated a soft click can be felt. During playback, rotating the dial one click
clockwise will make the VCR enter Visual search x 3 mode. An additional click clockwise or
counter clockwise will change the operation as illustrated above.
clockwise will make the VCR enter Visual search x 3 mode. An additional click clockwise or
counter clockwise will change the operation as illustrated above.
The start position shown above is only an example. The Shuttle dial can be operated from any
position.
position.
Press
PLAY/X2
(
) to resume playback at any time, or rotate the
shuttle dial clockwise/counter clockwise until the playback function is
selected.
selected.
NOTE:
•
There will be picture interference and possibly a change to black and white picture
using Visual Fast Forward/Rewind functions.
using Visual Fast Forward/Rewind functions.
(ANTI)
COUNTERCLOCKWISE
CLOCKWISE
PLAYBACK
REVERSE VISUAL SEARCH x 7
REVERSE VISUAL SEARCH x 3
VISUAL SEARCH x 7
PLAY/X2
VISUAL SEARCH x 3
REC
PAUSE/STILL
REW
FF
PLAY / X2
STOP
Remote Control
TINS-3809UMZZ ENGLISH.book Page 10 Monday, April 3, 2000 2:03 PM
11
If problems persist contact the SHARP Helpline on tel: 0990-274277
BASIC OPERATION
IMMEDIATE RECORDING
SELECTION OF A CHANNEL
Select the channel by using the number buttons on the remote control, or select the
next/previous channel by pressing
next/previous channel by pressing
CHANNEL
[
or
].
To change between single digit and 2-digit channel numbers, press
AM/PM
.
For example, for channel 24, press
AM/PM
then press
2
4
.
You can record the channel you are watching or a different channel.
1.
Insert a video tape into your VCR.
2.
Select the channel you wish to record on the VCR.
3.
To start recording, press
REC
(
).
4.
To pause during recording, press
PAUSE/STILL
(
).
5.
To continue recording, press
REC
(
).
6.
To stop recording, press
STOP
(
) once.
SIMPLE TIMED RECORDING:
1.
To specify a stop time, press
REC
(
).
2.
Each additional press of
REC
(
) will delay
the stop time by 10 minutes.
3.
To stop recording at any time, press
STOP
(
) once.
NOTES:
•
If the tape ends before the recording is complete the VCR will stop recording, rewind,
eject the tape and place the VCR into POWERSAVE/STANDBY mode, or just eject the
tape and place the VCR in POWERSAVE/STANDBY timer mode if the VCR is in timer
record mode.
eject the tape and place the VCR into POWERSAVE/STANDBY mode, or just eject the
tape and place the VCR in POWERSAVE/STANDBY timer mode if the VCR is in timer
record mode.
•
If the VCR ejects the video tape when you press
REC
(
) the tape is record
protected. i.e. record protection tab has been removed.
STOP 15:30
DPSS
INPUT SELECT
CHANNEL
AM/PM
SLOW
TAPE
SPEED
TV/VCR
REC
PAUSE/STILL
REW
FF
PLAY / X2
STOP
7
8
0
9
Remote Control
TINS-3809UMZZ ENGLISH.book Page 11 Monday, April 3, 2000 2:03 PM
12
If problems persist contact the SHARP Helpline on tel: 0990-274277
BASIC OPERATION
HOW TO USE TO MAKE A RECORDING
Before you start!
•
If
appears on the VCR display, press
TIMER ON/OFF
to remove the
symbol.
•
Check that the VCR clock is displaying the correct time.
VIDEOPLUS+ allows you to program the VCR to record up to eight programmes using the
VIDEOPLUS+ numbers published in TV listings (refer to your daily newspaper or TV magazine).
VIDEOPLUS+ numbers published in TV listings (refer to your daily newspaper or TV magazine).
1.
Press the
PLUSCODE
button on the remote
control.
2.
Enter the VIDEOPLUS+ number from the TV
listing using the
listing using the
NUMBER BUTTONS
.
NOTE:
3.
Press the [
/
] menu select buttons to select ONCE,
WEEKLY, DAILY.
4.
If you want to make additional recordings at the same time
each day or week, then use
[
/
]
to select the WEEKLY,
or DAILY option as appropriate.
5.
Press
SET
to confirm.
NOTE:
The first time that you use VIDEOPLUS+ to make a
recording on each channel Preset, (PR) may be
highlighted on the On-Screen Display.
recording on each channel Preset, (PR) may be
highlighted on the On-Screen Display.
6.
Enter the channel you wish to record using
the
the
NUMBER BUTTONS
, for example if
you wish to record channel 2 press
0 2
. The
VCR will remember this for the future.
See next page to continue
•
An ERROR message will appear if you have entered a number that is not a current
VIDEOPLUS+ number. If this happens press
VIDEOPLUS+ number. If this happens press
CLEAR
to delete the numbers as required
and enter the correct VIDEOPLUS+ number
•
Check that the menu list agrees with the times shown in the TV listing. If it does not press
CLEAR
to return to the VIDEOPLUS+ menu, and re-enter the correct VIDEOPLUS+
number
→
P L U S COD E .
-
ONC E
WE E K L Y
DA I L Y
MENU SELECT BUTTONS
Remote
Control
Control
1 / 2
DA T E P R
S T AR T
S T OP
2 1 / 0 6
0 2
1 2 : 0 0
1 3 : 0 0
S P *
- - / - -
- -
- : - -
- : - -
- - -
- - / - -
- -
- : - -
- : - -
- - -
- - / - -
- -
- : - -
- : - -
- - -
P R
: BBC 2
: S E L EC T
: CHANGE
S E T
: E N T E R ME NU : E X I T
TINS-3809UMZZ ENGLISH.book Page 12 Monday, April 3, 2000 2:03 PM
13
If problems persist contact the SHARP Helpline on tel: 0990-274277
BASIC OPERATION
HOW TO USE TO MAKE A RECORDING
7.
If your VCR has long play facility and you wish
to change the
RECORDING SPEED
, use
the
[
/
]
to highlight SP. Press [
/
]
to select standard play (SP) or long play (LP)
as required.
8.
[See
NOTE
below]. For VPS/PDC setting use
[
/
]
to highlight the final column. Using
the [
/
] will select VPS/PDC ON or OFF
(
✱
= ON
-
= OFF).
9.
Press
SET
to confirm the programme. The
VIDEOPLUS+ menu will reappear. If you wish
to enter further VIDEOPLUS+ recordings
repeat this procedure.
10.
When you have completed entering timer
settings, press
MENU
to remove the menu
from the TV screen.
11.
Ensure that the tape on which you wish to
record is inserted into the VCR, then press
TIMER ON/OFF once to place the VCR in
TIMER POWERSAVE/TIMER STANDBY mode.
will be shown on the display.
NOTES:
•
You may also access the VIDEOPLUS+ menu by the following procedure:
i.
Press
MENU
.
ii.
The VIDEOPLUS+ option will be highlighted. Press
SET
to confirm.
Continue from step 2 above.
•
VPS/PDC is a signal broadcast by some TV stations which adjusts the start and stop time
of your VCR recording. This ensures that if there is a change in broadcast time for your
programme the VCR will still record the whole programme. It is essential that the start
time as it appears in the TV listing is used to program the VCR, as this information is used
to identify the VPS/PDC signal corresponding to your programme.
of your VCR recording. This ensures that if there is a change in broadcast time for your
programme the VCR will still record the whole programme. It is essential that the start
time as it appears in the TV listing is used to program the VCR, as this information is used
to identify the VPS/PDC signal corresponding to your programme.
•
If
flashes a video tape has not been inserted into the VCR.
•
If the video tape is ejected when the VCR tries to record the record protection tab has
been removed.
been removed.
•
During recording, press
STOP
(
) to cancel the recording. If there are further
recordings to be made, the VCR will return to TIMER POWERSAVE or TIMER STANDBY.
1 / 2
DA T E P R
S T AR T
S T OP
2 1 / 0 6
0 2
1 2 : 0 0
1 3 : 0 0
S P
*
- - / - -
- -
- : - -
- : - -
- - -
- - / - -
- -
- : - -
- : - -
- - -
- - / - -
- -
- : - -
- : - -
- - -
T A P E
S P E E D :S P / L P
: S E L EC T
: CHANGE
S E T
: E N T E R ME NU : E X I T
1 / 2
DA T E P R
S T AR T
S T OP
2 1 / 0 6
0 2
1 2 : 0 0
1 3 : 0 0
S P
-
- - / - -
- -
- : - -
- : - -
- - -
- - / - -
- -
- : - -
- : - -
- - -
- - / - -
- -
- : - -
- : - -
- - -
V P S / P DC
✱ : ON - : OF F
: S E L EC T
: CHANGE
S E T
: E N T E R ME NU : E X I T
TINS-3809UMZZ ENGLISH.book Page 13 Monday, April 3, 2000 2:03 PM
Click on the first or last page to see other VC-M333 (serv.man7) service manuals if exist.