Sharp LC-70UQ10KN (serv.man4) User Manual / Operation Manual ▷ View online
51
USB-recording
You can enjoy DTV/SAT recording or playback by
connecting a commercially available USB HDD to
the TV.
• USB-recording does not work for ATV, external
inputs, data broadcasts, radio broadcasts or network
applications.
Connecting a USB HDD
Connect a commercially available USB HDD to the
USB port of the TV.
• USB storage device: USB HDD
• Be sure to read the operation manual for the USB HDD.
• At least USB HDDs with memory between 100GB
and 2TB and under are required for USB-recording to
register.
• The USB 2 (HDD) port is compatible with portable USB
HDD which can operate with the power supply from the
USB port (bus powered drive).
• Refer to
Disconnect the USB HDD when removing the
USB HDD (do not remove the USB HDD during USB-
recording operation).
NOTE
• USB-recording may take a few moments to start after
the TV is turned on.
• This function may not work properly for some USB
HDDs.
• Do not connect and disconnect a USB HDD from the TV
repeatedly.
USB HDD registration
It is necessary to first perform USB HDD registration
for USB HDDs used for USB-recording.
Directly connect only one USB HDD to the USB
port while registering the USB HDD (when two
or more USB HDDs are connected, USB HDD
registration is not available).
• The screen prompt pops up.
When the USB HDD is connected to the TV
Register the USB HDD. Follow the on-screen
instructions to register the USB HDD.
NOTE
• Only one USB HDD for USB-recording can be registered
on the TV. Two or more USB HDDs for USB-recording
cannot be used at the same time.
• When a USB HDD is registered, formatting may be
performed. In that case, all data will be deleted.
Disconnecting the USB HDD
When you disconnect the USB HDD, be sure to the
following steps.
Go to “TV Menu” > “Setup” > “View setting” >
“USB REC setting” > “Device removal”.
NOTE
• This menu item cannot be selected when a USB HDD
for USB-recording is not registered.
• The USB HDD registration for USB-recording is
cancelled in the following cases:
− When the USB HDD is removed.
− When another USB HDD is registered for USB-
recording; only one USB HDD can be registered for
USB-recording.
Other useful features
52
How to operate USB-recording
You can enjoy DTV/SAT recording or playback by
connecting a commercially available USB HDD to
the TV.
CAUTION
• Do not unplug the AC cord during USB-recording timer
setting or USB-recording.
• When the AC cord is unplugged:
− The USB-recording timer setting is cancelled.
• USB-recording may be automatically stopped when
signal reception is poor.
• Only this TV can playback the programme recorded on
the USB HDD connected to this TV. The programmes
cannot playback on other TV or PC.
• When a CAM PIN code is required for recording a
programme, it is necessary to enter the CAM PIN code
in advance (Page 11).
SHARP corporation bears no responsibility regarding
compensation for content when recording cannot does
not take place, loss of recorded data or other direct or
indirect damages related to these matters. Please be
forewarned.
E
Buttons for USB-recording operation
Remote control unit
Control panel
Buttons
Description
Displays the list of the programmes
recorded by USB-recording.
REC E
Start recording the programme you are
watching.
• You cannot playback the recorded
programme until several seconds
after pressing
REC E to start
recording.
REC STOP H
Stop recording.
I
Playback the recorded programme.
H
Stop the programme in playback and
go back to the real time broadcast
(live).
F
Pause the programme in playback
(USB-recording continues).
• This function is released in 15
minutes.
S
Reverse (each time you press this
button, the reverse speed changes in
three levels).
J
Fast forward (each time you press this
button, the fast forward speed changes
in three levels).
K
Jump backward to the previous
chapter point*.
L
Jump forward to the next chapter
point*.
a
Playback will resume after jumping
backward by the time interval you set
in “Jump time setting” (Page 54).
b
Playback will resume after jumping
forward by the time interval you set in
“Jump time setting” (Page 54).
* Chapter points are fixed at 10 minute increments.
NOTE
• Refer to
Regarding “Select recording device” (Page 30),
when the buttons for USB-recording do not work.
• Instead of pressing buttons on the remote control
unit, most of the operations shown to the left are also
available on the screen with the control panel. You can
call up this control panel by pressing
CONTROL on the
remote control unit or select “Control (USB REC)” from
“TV Menu” > “Setup” > “Option” > “Option for view”.
• The “Audio description setting” menu does not work
during USB-recording playback.
• USB-recording stops if no operation detected for three
hours.
• When recording operations are not stopped manually,
recording will automatically stop after six hours.
• To release USB-recording, press
REC STOP H, change
the DTV/SAT channel or change “INPUT”.
• Some functions do not work during USB-recording.
• USB-recording does not start automatically, but starts
only when
REC E is pressed or when a USB-recording
timer setting is started.
• The PIN is required when you use the buttons such as
S
, J, K, L, a, b if you set the PIN
and any options for “Parental rating” except “None” are
selected.
• Do not disconnect the USB-HDD used for USB-
recording during USB-recording operation.
Other useful features
53
USB-recording
You can record the programme you are watching to
the registered USB HDD.
Starting USB-recording
Press
REC E.
• The TV starts USB-recording.
NOTE
• You can also operate from the control panel by pressing
CONTROL.
• You cannot switch the channel or the input source
during USB-recording.
• During USB-recording, the TV cannot display photos
or play music from the internet, Home network, or USB
storages.
• You may not record programmes.
Completing USB-recording
1
Press
REC STOP H.
• The screen prompt pops up.
2
Press c/d to select “Yes”, and then press ;.
• USB-recording has completed.
NOTE
• You can also operate from the control panel by pressing
CONTROL.
USB-recording timer setting
You can set the USB-recording timer setting for
programmes you want to record.
NOTE
• To prevent the first part of the programme from being
cut, start recording the programme a few seconds
earlier than time set to start recording.
• When recording/viewing timer settings are set
continuously for multiple programmes, schedule the
recording of the previous programme to end earlier than
the end of the programme itself. Recording/viewing
timer setting of the next programme will start after that.
• A message will be displayed when the scheduled time
overlaps with an existing schedule. Make changes in
accordance with the on-screen instructions.
• It is not possible to newly schedule a recording that
overlaps with a timer setting that is currently running
(recording). When urgent setting of a schedule is
desired, stop recording before scheduling.
• A combined total of 16 timer settings (“Watch” and
“Record”) can be set.
• A CAM (CI Plus v1.3) PIN code may be necessary
to record broadcasts scrambled due to parental
rate settings. When a CAM PIN code is required for
recording a programme, it is necessary to enter the
CAM PIN code in advance (Page 11).
If a CAM PIN code is not entered or is entered
incorrectly, the programme will not be able to be
recorded/played back.
EPG timer setup
You can select the programme you want to record
and set the timer setting with EPG (Pages 22 and 23).
Manual timer setting
“Manual timer setting” enables you to set date,
recording start/stop time and channel.
1
Press
EPG.
2
Press
B to display the timer list.
3
Press
B again to display the “Manual timer
setting” screen.
4
Set date, recording start/stop time and channel.
5
Press c/d to select “Record”, and then press
;.
• A confirmation screen will be displayed for the timer
setting.
6
Press c/d to select “Yes”, and then press ;.
Manual clock setting
When the TV cannot receive the time via digital
broadcast, perform “Manual timer setting” after
setting the clock.
Go to “TV Menu” > “View setting” >
“Individual setting” > “Clock setup” > “Time
adjustment”.
NOTE
• You cannot set the manual clock setting during USB-
recording.
Timer list
A list of programmes scheduled for recording can be
displayed.
1
Press
EPG.
2
Press
B to display the timer list.
USB-recording playback
To playback the recorded programmes, open
the USB-recording list and select the desired
programme.
1
Go to “HOME” > “Record list”.
2
Press “OK” button.
• Press H to return the scene that is broadcasting.
NOTE
• You may not playback recorded programmes when the
programme provider restricts or completely prevents
recording or later watching of an encoded programme.
• Depending on the protection signal specified by a
broadcast station, recorded broadcasts can only be
played back for a certain period of time or cannot be
played back at all (Page 11).
Other useful features
54
Time shift playback
Playback recorded scenes of the programme being
recorded.
Press
d
during recording.
• Press H to return the scene that is broadcasting.
NOTE
• You can also operate from the control panel by pressing
CONTROL.
• Time shift playback may take a few moments to start.
• Time shift playback will stop and the TV will return to
normal broadcasting when a program is fast-forwarded
to a scene that is near to the scene currently being
broadcast. The timing at which it returns depends on
the speed of fast-forwarding.
• Depending on the protection signal specified by a
broadcast station, recorded broadcasts can only be
played back for a certain period of time or cannot be
played back at all (Page 11).
NOTE for France
• When switched scramble broadcast and non-scramble
broadcast during time shift playback, a black screen
may be displayed.
Display information regarding USB-
recording
Channel display
Channel information displays by pressing p on the
remote control unit.
Audio (ENG)
STEREO
Video
Subtitle
Off
>> New information
w
n
The recording icon shows up when
REC E is
pressed and the TV is recording the programme.
w
o
The status icon shows up depending on what
is shown on the screen.
Counter
The counter displays on the screen with the control
panel.
00:02:38/00:08:18
w
n
Current playback time
• Hidden during recording
w
o
Total playback time of the content
w
p
The grey bar shows how much time has
progressed.
• Hidden during recording or playback-during-
recording
NOTE
• You can also call up the information above by pressing
CONTROL on the remote control unit or select “Control
(USB REC)” from “TV Menu” > “Setup” > “Option” >
“Option for view”.
View setting
Auto input selection
You can choose whether or not to switch the input
source automatically when receiving an AQUOS
LINK or an Euro SCART compatible signal on the TV
during USB-recording operations.
Go to “TV Menu” > “Setup” > “View setting” >
“USB REC setting” > “Auto input selection”.
Item
Enable
Release USB-recording when receiving
an AQUOS LINK or a Euro SCART
compatible signal. Switch input source
automatically.
Disable
USB-recording continues to work.
The TV does not switch input source
automatically even when receiving
an AQUOS LINK or a Euro SCART
compatible signal.
View setting
Jump time setting
You can set the time interval for playback to resume
after jumping backwards/forward.
Go to “TV Menu” > “Setup” > “View setting” >
“USB REC setting” > “Jump time setting”.
• A time interval from 10 sec. to 99 min. 50 sec can
be selected.
NOTE
• You can use the time interval you set using the a or
b buttons.
View setting
Device registration
You need to perform this function to register the
USB HDD for the USB-recording.
Go to “TV Menu” > “Setup” > “View setting” >
“USB REC setting” > “Device registration”.
• Refer to
USB HDD registration (Page 51).
NOTE
• Only one USB HDD can be registered for USB-
recording. Remove all USB HDDs except the one used
for USB-recording.
• At least USB HDDs with memory between 100GB
and 2TB and under are required for USB-recording to
register.
• Some USB HDDs, such as ones which have multiple
drives, etc., cannot be used for USB-recording.
View setting
Device format
You can format all data on the USB HDD.
Go to “TV Menu” > “Setup” > “View setting” >
“USB REC setting” > “Device format”.
NOTE
• Once formatting has been completed, data cannot be
restored.
Other useful features
Click on the first or last page to see other LC-70UQ10KN (serv.man4) service manuals if exist.