Sharp LC-70UQ10KN (serv.man4) User Manual / Operation Manual ▷ View online
47
Option
Headphone/Audio out select
You can select which device is used for outputting
audio.
Go to “TV Menu” > “Setup” > “Option” >
“Terminal setting” > “Headphone/Audio out
select”.
Item
Headphone
Output audio through headphones.
Audio out
Output audio through an A/V receiver
or surround audio controller.
CAUTION
• This terminal is also used for headphones. Reduce the
volume before using headphones. Overwhelming sound
may damage your hearing.
NOTE
• If you select “Audio out” when a cable is inserted in the
HDMI 2/PC AUDIO (L/R) terminal, the TV speakers are
muted.
• When you select “Audio out”, you can adjust the TV
sound volume with the i+/- buttons.
Option
Headphone out setting
You can select the headphone/speaker audio output
when using the headphones.
Go to “TV Menu” > “Setup” > “Option” >
“Terminal setting” > “Headphone out setting”.
Item
Headphone
Audio output from headphones only.
Dual
Audio output from headphones and
speakers.
NOTE
• This function does not work when “Change audio
output device” (Page 33) is set to “By AQUOS audio SP”
or “Headphone/Audio out select” is set to “Audio out”.
• Regarding the volume adjustment when “Dual” is set:
− Adjust the speaker volume with the i+/- buttons
on the remote control unit.
− Adjust the headphone volume with the i+/-
buttons on the TV.
− The headphone volume is not muted even by pressing
e
(Mute) button on the remote control unit.
• When not using the headphones:
− Audio outputs from the speakers regardless of the
settings.
Option
Colour system
You can change the colour system to one that is
compatible with the image on the screen.
Go to “TV Menu” > “Setup” > “Option” >
“Colour system”.
NOTE
• The factory preset value is “Auto”.
• If “Auto” is selected, the colour system for each channel
is automatically set. If an image does not display clearly,
select another colour system (e.g., “PAL”, “SECAM”).
Screen effect settings
Option
Channel selecting effect
This function shows a screen effect when choosing
or changing channels.
Go to “TV Menu” > “Setup” > “Option” >
“Screen effect” > “Channel selecting effect”.
Option
Programme title display
This function allows you to display programme
information such as the title and airtime by tuning a
channel.
Go to “TV Menu” > “Setup” > “Option” >
“Screen effect” > “Programme title display”.
NOTE
• This function is available only when the DTV/SAT mode
is selected.
Adjusting image position
Option
Position
For adjusting a picture’s horizontal and vertical
position.
Go to “TV Menu” > “Setup” > “Option” >
“Screen effect” > “Position”.
Item
H-Pos.
Centres the image by moving it to the
left or right.
V-Pos.
Centres the image by moving it up or
down.
NOTE
• Adjustments are stored separately for each input
source.
• Depending on the input signal type, “Wide mode”
setting or “Video mode” for the USB media mode, a
position setting may not be available.
• This function is not available for DTV broadcasts with
MHEG signals.
• This function is available for 3D images converted from
2D images or normal 2D images.
Useful viewing functions
48
Additional features
Option
Illumination
This function makes the LED on the front of TV
illuminated in several ways.
Go to “TV Menu” > “Setup” > “Option” >
“Illumination”.
Item
Off
The LED is not illuminated.
Standby
The LED is illuminated while the TV is
in standby mode.
Watch
The LED is illuminated while you watch
TV.
Always
The LED is illuminated all the time.
NOTE
• The factory default for this item is “Watch”. Set to “Off”
if you do not want the LED to illuminate.
• The LED is illuminated in white for 2D mode.
• The LED is illuminated in blue for 3D mode.
Option
Quick start
You can reduce the TV’s start-up time after turning
on the power with the remote control unit.
Go to “TV Menu” > “Setup” > “Option” > “Quick
start”.
Item
On
The TV quickly starts up from standby.
Around 15 W or more of power
consumption is required during
standby.
On (Wallpaper) The TV enters wallpaper mode when in
standby condition.
Off
Power consumption is small during
standby.
Option
Wallpaper setting
This function is available only when “Quick start” is
set to “On (Wallpaper)”.
Activating the function will display still images when
the TV is in standby mode.
Data source
For the wallpaper, you can select either the still
images pre-installed in the TV or your favourite still
images stored in the USB device or SD memory
card.
Item
Pre-installed
The images pre-installed in the TV will
be displayed in a slideshow.
SD/SDHC/USB
Images stored for the wallpaper will
appear.
If only a single still image is stored in
the USB device or SD memory card,
that image will be displayed as the
wallpaper. When there are multiple still
images in the memory, all the images
will be displayed in a slideshow.
NOTE
• Images are displayed as a slideshow in 3-minute
intervals.
• As a USB device or SD memory card cannot be
detected immediately after the TV is turned on from
standby mode, the wallpaper pre-installed in the TV
may be displayed even when “Data source” is set to
“SD/USB”. To display the SD/USB Wallpaper, turn on
the power and wait 10 seconds before turning off the
power.
• When in the wallpaper function, do not perform any
OAD operations or EPG searches.
• A timer set for recording or watching a programme will
take priority 2 minutes before the programme starts.
E
When you display images by using the
USB device or SD memory card:
• Create a folder named “WP” in the root directory of the
USB device or SD memory card (the first directory when
the USB device is opened), and store into the folder the
still images you want to display for the wallpaper.
• You must insert the USB device or SD memory card into
the TV before it is turning off.
Timer setting
You can set the length of time the TV will remain in
the Wallpaper mode (3 hours/6 hours/12 hours/24
hours).
NOTE
• Setting “Quick start” to “On” consumes more power.
• No buttons except for a work even while the still
images are being displayed.
• If the ready-for-use USB device is not inserted, the still
images pre-installed in the TV will be displayed in a
slideshow even when “Data source” is set to “USB”.
• The still images will be displayed until the set time has
elapsed.
• If you do not want to use the wallpaper as described
above, set “Quick start” to “On” or “Off”.
Option
Boot picture
With this function activated, the SHARP logo will be
displayed when you turn on the TV.
NOTE
• This function is not available when the “Quick Start” is
set to “On”.
Useful viewing functions
49
Option
Game play time
This function allows you to display the elapsed time
on the screen when “AV mode” is set to “GAME”.
Go to “TV Menu” > “Setup” > “Option” > “Game
play time”.
Item
On
Under connecting a game console to
the TV, the elapsed time is displayed
in 30-minute increments after you start
playing a game.
Off
Hides the time.
NOTE
• This menu can be selected in the case of the following
input sources:
− EXT1–3
− HDMI1–4
− PC
Option
Key lock
This function allows you to lock the buttons on the
TV or remote control unit in order to prohibit children
from changing the channel or volume.
Go to “TV Menu” > “Setup” > “Option” > “Key
lock”.
Item
Off
Unlocks the buttons.
RC control lock
Locks all buttons on the remote
control unit.
Button control
lock
Locks the buttons on the TV except
the power switch.
NOTE
• You cannot set both “RC control lock” and “Button
control lock” at the same time.
E
Cancelling the lock
Press @ on the TV and set to “Off” to cancel
the “RC control lock”. Press @ on the remote
control unit and set to “Off” to cancel the “Button
control lock”.
• Refer to page 19 for menu operation using @ on
the TV.
Option
Bluetooth
Set this function when using the Bluetooth devices
with your TV.
It is possible to connect 3D glasses, a keyboard,
It is possible to connect 3D glasses, a keyboard,
mouse, tablet and smartphone.
NOTE
• When you use the Bluetooth device with your TV for the
first time, you must make pairing between the device
and the TV. Once the pairing is correctly carried out, the
Bluetooth device will be registered on the TV.
Bluetooth devices
You can add, delete or select Bluetooth devices.
If you connect a tablet or smartphone to the TV by
Bluetooth, you can listen its sound through the TV.
E
Addition of a Bluetooth Device
Go to “TV Menu” > “Setup” > “View Setting” >
“Bluetooth” > “Pairing new device".
You can connect 3 kinds of Bluetooth devices listed
You can connect 3 kinds of Bluetooth devices listed
below:
− Keyboard device
− Mouse device
− Audio input device
Connection / Selection Procedure
1
Press
▲/▼ to select the device you want to
connect.
2
Press
◄/► to select “Search”, and then press
“OK”.
3 Model names of the detected devices will be
displayed.
4 Select the device with the message “NEW”, and
then press “OK”.
5 Wait the message indicating “The pairing is
completed”, and then press “OK”.
Before connecting the devices, press the connect
button on the Bluetooth device you want to connect.
− Keyboard device: When pairing operation
between keyboard and TV is completed, enter
the PIN code by using the keyboard device.
− Mouse device: When pairing operation between
mouse and TV is completed, the name will be
displayed, then press “OK”.
− Audio input device:
1 Change input source to Bluetooth by pressing
b
b
on R/C.
2 In Bluetooth device (smartphone/tablet)
enable Bluetooth function. The device starts to
search Bluetooth standby TV.
3 TV name will be shown in Bluetooth device,
then select it.
NOTE
• See also the instruction manual supplied with the
Bluetooth device.
• You can register up to 6 devices to the TV, but only one
keyboard, mouse and audio input device can be used at
a time.
• If a device for which "Selected" is displayed does not
operate properly, try searching and selecting the device
again.
• The keyboard or mouse may not operate properly
depending on the application being used.
• The Bluetooth device may not operate properly
depending on the device being used.
Useful viewing functions
50
Wireless Screen via Miracast - Outline
Browser
News/
articles
Miracast
Android4.2 standard installation
Apps
video
game
Data in
device
Photo/
movie
★ TV Screen will be automatically switched
in accordance with smartphone/tablet screen.
Countless
contents!!
By Miracast technology, you can enjoy the contents of Miracast
capable smartphone/tablet(both of picture and sound) on TV’s
big screen and speaker.
capable smartphone/tablet(both of picture and sound) on TV’s
big screen and speaker.
MIRACAST
By Miracast technology you can enjoy the contents of
Miracast compatible smartphone or tablet to this TV.
View setting
Using the Miracast device
When you connect a device such as a Miracast
compatible smartphone or tablet to this TV, you can
enjoy video and audio from the device on the TV's
large screen and speakers.
1
Switch the TV input to "Miracast".
2
Enable the Miracast function on the Miracast
device and connect to the TV.
(The TV changes according to the behavior of the
device).
NOTE
• When the TV is turned off or the connection is ended on
the device, you must connect the device again.
• When connecting using a PIN code, first select the
corresponding menu on the "Miracast" menu, and then
perform the operations from step 1.
• If you want to specify the preferred band to use with
this function, select the corresponding menu on the
"Miracast" menu.
• For details about the operation of the Miracast
compatible device, check the manual for that device.
Miracast function has two connection modes:
"PUSH Button Mode" and "PIN code Mode". User
can select connection method in TV menu.
When the connection is made, device screen will be
When the connection is made, device screen will be
displayed in the TV.
E
PUSH Button mode
1
Change input source to Miracast by pressing
b
b
on R/C.
2
In Miracast device (smartphone/ tablet) enable
Miracast function.
The device starts to search for the TV with
Miracast in standby mode.
3
TV name will be shown, then select it.
When the connection is made, device screen will be
displayed in the TV.
E
PIN Code mode
1
Change input source to Miracast by pressing
b
b
on R/C.
2
In Miracast device (smartphone/ tablet) enable
Miracast function. The device starts to search
for the TV with Miracast in standby mode.
3
TV name and PIN code will be shown (PIN code
is created randomly.)
Enter the PIN code displayed on the TV.
Enter the PIN code displayed on the TV.
When the connection is made, device screen will be
displayed in the TV.
Failed connection
I
f connection is not established, the next message
will appear:
"Connection failed"
Please, repeat procedure "Connection Mode
Setting".
Configures Wireless Channel settings.
NOTE
• Depending on the connected device, different channels
may be assigned.
Useful viewing functions
Wireless Channel Setting
Connection Mode Setting
Click on the first or last page to see other LC-70UQ10KN (serv.man4) service manuals if exist.