Sharp LC-70UD20KN (serv.man4) Service Manual ▷ View online
17
LC-60UD20
LC-70UD20
Operation Manual (Continued)
Sear
ching for satellite br
oadcasts
Pr
ess
a/b
to select “Satellite sear
ch”, and then
pr
ess
;
.
Digital search
Analogue search
Satellite search
•
The antenna connection setting scr
een is displayed.
Single satellite
2 satellites on toneburst switchbox
Max. 4 satellites on DiSEqC multiswitch
Communal satellite system
NOTE
•
Y
ou can select the antenna connection method fr
om the
four types. Consult your dealers befor
e using a method
other than “Single satellite”.
E
“Single satellite” setting
1
Pr
ess
a/b
to select “Single satellite”, and then
pr
ess
;
.
2
Pr
ess
a/b/c/d
to select your favorite
satellite, and then pr
ess
;
.
Eur
o Bir
d 1
Atlantic Bir
d 1
NOTE
•
Follow the instructions on the scr
een for “2 satellites
on toneburst switchbox”, “Max. 4 satellites on DiSEqC
multiswitch” and “Communal satellite system” settings.
•
T
o
set multiple satellite channels, go to “Max. 4 satellites
on DiSEqC multiswitch”.
•
When a power supply is needed for your satellite
antenna, follow the pr
ocedur
e below in or
der to supply
the voltage specified by your service pr
ovider
, etc.:
Go to “TV Menu” > “Setup” > “V
iew setting” > “Channel
settings” > “Antenna setup-DIGIT
AL” > “Satellite setup” >
“Change setting” > “Communal satellite system”.
E
Sear
ch start:
DVB-S/S2 channel sear
ching.
1
Pr
ess
c/d
to select “Y
es”, and then pr
ess
;
.
•
T
o
change the settings for “Scrambled stations”,
pr
ess
a/b
to select the item to be r
econfigur
ed
and then perform “Sear
ch start”.
Ye
s
No
Scrambled stations
Search start
Start search?
[Y
es]
2
The TV sear
ches for and stor
es all the r
eceivable
TV stations accor
ding to their settings and the
connected antenna.
•
Select “Y
es” to sort the sear
ch r
esult in alphabetical
or
der
.
•
T
o
abort the initial auto installation in pr
ogr
ess,
pr
ess
6
.
NOTE
•
Scrambled stations: Specifies if you need to choose
pay-TV services.
•
Follow the pr
ocedur
e to perform “Manual sear
ch” if you
want to configur
e the fr
equency or symbol rate and start
to sear
ch after performing the auto sear
ching during the
initial auto installation.
−
Go to “TV Menu” > “Setup” > “V
iew setting” >
“Channel settings” > “Pr
ogramme setup” > “Satellite
setting” > “Manual sear
ch”.
18
LC-60UD20
LC-70UD20
Operation Manual (Continued)
Checking signal str
ength and
channel str
ength (DVB-T/T2/C/S/S2)
If you install a DVB-T/T2/C/S/S2 antenna for the first
time or r
elocate it, you should adjust the alignment
of the antenna to r
eceive a good r
eception while
checking the antenna setup scr
een.
1
Go to “TV Menu” > “Setup” > “V
iew setting” >
“Channel settings” > “Antenna setup-DIGIT
AL”.
2
Pr
ess
a/b
to select “Digital setup” or “Satellite
setup”, and then pr
ess
;
.
E
Checking signal str
ength
3
Pr
ess
a/b
to select “Signal str
ength”, and then
pr
ess
;
.
Signal str
ength for DVB-T/T2/C
Supply voltage
CH No.
Current
Max.
Signal strength
Signal strength
Channel strength
Current
Max.
Quality
Signal str
ength for DVB-S/S2
Current
Max.
Signal strength
Signal strength
Channel strength
Current
Max.
Quality
E
Checking channel str
ength
4
Pr
ess
a/b
to select “Channel str
ength”, and
then pr
ess
;
.
•
Y
ou can input a specified fr
equency band using the
0
_
9
numeric buttons.
Channel str
ength of DVB-T/T2
Supply voltage
CH No.
Current
Max.
Signal strength
MHz
Signal strength
Frequency
Channel strength
Current
Max.
Quality
Channel str
ength of DVB-C
Supply voltage
Current
Max.
Signal strength
MHz
Signal strength
Frequency
Symbol rate
QAM modulation
Channel strength
Current
Max.
Quality
Channel str
ength of DVB-S/S2
Current
Max.
Signal strength
MHz
Signal strength
Frequency
Symbol rate
Band
Channel strength
Current
Max.
Quality
V
ert/Low
5
Position and align the antenna so that the
maximum possible values for “Signal str
ength”
and “Quality” ar
e obtained.
NOTE
•
The values of “Signal str
ength” and “Quality” indicate
when to check the appr
opriate alignment of the
antenna.
Supplying power to the antenna
Y
ou must supply power to the antenna in or
der
to r
eceive digitally/terr
estrially br
oadcast stations
after connecting the antenna cable to the antenna
terminal on the r
ear of the TV
.
1
Go to “TV Menu” > “Setup” > “V
iew setting” >
“Channel settings” > “Antenna setup-DIGIT
AL” >
“Supply voltage”.
2
Pr
ess
c/d
to select “On”, and then pr
ess
;
.
19
LC-60UD20
LC-70UD20
DIMENSIONS
I
Active area
J
Thinnest part (except of terminal height)
NOTE
~ Dimensions do not include protrusions such as screws and some parts.
LC-60UD20E
LC-60UD20EN
LC-60UD20KN
LC-60UD20EN
LC-60UD20KN
20
LC-60UD20
LC-70UD20
Dimensions (Continued)
I
Active area
J
Thinnest part (except of terminal height)
NOTE
~ Dimensions do not include protrusions such as screws and some parts.
LC-70UD20E
LC-70UD20EN
LC-70UD20KN
LC-70UD20EN
LC-70UD20KN
Click on the first or last page to see other LC-70UD20KN (serv.man4) service manuals if exist.