Sharp LC-60LE841E (serv.man2) User Manual / Operation Manual ▷ View online
43
Additional features
Option
Illumination
This function makes the LED on the front of TV
illuminated in several ways.
Go to “HOME” > “TV Menu” > “Setup” >
“Option” > “Illumination”.
Item
Off
The LED is not illuminated.
Standby
The LED is illuminated while the TV is
in standby mode.
Watch
The LED is illuminated while you watch
TV.
Always
The LED is illuminated all the time.
NOTE
• The factory default for this item is “Watch”. Set to “Off”
if you do not want the LED to illuminate.
• The LED is illuminated in white for 2D mode.
• The LED is illuminated in blue for 3D mode.
Option
Game play time
This function allows you to display the elapsed time
on the screen when “AV mode” is set to “GAME”.
Go to “HOME” > “TV Menu” > “Setup” >
“Option” > “Game play time”.
Item
On
Under connecting a game console to
the TV, the elapsed time is displayed
in 30-minute increments after you start
playing a game.
Off
Hides the time.
NOTE
• This menu can be selected in the case of the following
input sources:
−
EXT1–3
−
HDMI1–4
−
PC
Option
Key lock
This function allows you to lock the buttons on the
TV or remote control unit in order to prohibit children
from changing the channel or volume.
Go to “HOME” > “TV Menu” > “Setup” >
“Option” > “Key lock”.
Item
Off
Unlocks the buttons.
RC control lock
Locks all buttons on the remote
control unit.
Button control
lock
lock
Locks the buttons on the TV except
the power switch.
NOTE
• You cannot set both “RC control lock” and “Button
control lock” at the same time.
E
Cancelling the lock
Press @ on the TV and set to “Off” to cancel
the “RC control lock”. Press @ on the remote
control unit and set to “Off” to cancel the “Button
control lock”.
• Refer to page 19 for menu operation using @ on the
TV.
Useful viewing functions
44
Time shift +
You can enjoy DTV/SAT recording or playback by
connecting a commercially available USB storage
device to the TV.
• Time shift + does not work for ATV, external inputs, data
broadcasts, radio broadcasts or network applications.
Connecting a USB storage device
Connect a commercially available USB storage
device to the USB port of the TV.
• USB storage device: USB memory or USB HDD
• Be sure to read the operation manual for the USB
storage device.
• At least USB storage devices with memory between
1GB and 2TB and under are required for time shift to
register.
• The USB 2 (HDD) port is compatible with portable USB
HDD which can operate with the power supply from the
USB port (bus powered drive).
• Refer to Disconnect the USB storage device when
removing the USB storage device (do not remove the
USB storage device during time shift operation).
NOTE
• The supplied USB memory is used for the operation
manual of this TV and may not be used for time shift.
• Time shift may take a few moments to start after the TV
is turned on.
• This function may not work properly for some USB
storage devices.
• Do not connect and disconnect a USB storage device
from the TV repeatedly.
USB storage device registration
It is necessary to first perform USB storage device
registration for USB storage devices used for time
shift.
Directly connect only one USB storage device to
the USB port while registering the USB storage
device (when two or more USB storage devices
are connected, USB storage device registration
is not available).
• The screen prompt pops up.
When the USB storage device is connected to the TV
Register the USB storage device. Follow the on-screen
instructions to register the USB storage device.
• All the data on the USB storage device is deleted after USB
storage device registration.
NOTE
• In order to use time shift, it is necessary to change the
“Quick start” setting to “Auto (Time shift)” or “On”.
• Only one USB storage device for time shift can be
registered on the TV. Two or more USB storage devices
for time shift cannot be used at the same time.
• If a registered USB storage device is inserted, a screen
prompt will not be displayed.
Disconnecting the USB storage device
When you disconnect the USB storage device, be
sure to the following steps.
Go to “HOME” > “TV Menu” > “Setup” >
“View setting” > “Time shift setting” > “Device
removal”.
NOTE
• This menu item cannot be selected when a USB storage
device for time shift is not registered.
• The USB storage device registration for time shift is
cancelled in the following cases:
−
When the USB storage device is removed.
−
When another USB storage device is registered
for time shift; only one USB storage device can be
registered for time shift.
• Recorded data is deleted when removing the USB
storage device or turning off the TV.
Other useful features
45
How to operate Time shift +
This function enables you to pause the digital TV
or satellite programme you are watching and start
watching it again from the paused scene.
CAUTION
• Do not unplug the AC cord or turn off the MAIN POWER
switch during time shift timer setting or time shift
recording.
• When the AC cord is unplugged and the MAIN POWER
switch is turned off:
−
The time shift timer setting is cancelled.
−
Recorded data is deleted.
• Time shift recording may be automatically stopped
when signal reception is poor.
• Only this TV can playback the programme recorded
on the USB storage device connected to this TV. The
programmes cannot playback on other TV or PC.
SHARP corporation bears no responsibility regarding
compensation for content when recording cannot does
not take place, loss of recorded data or other direct or
indirect damages related to these matters. Please be
forewarned.
E
Buttons for time shift operation
Remote control unit
Control panel
Buttons
Description
REC E
Start recording the programme you are
watching.
• You cannot playback the recorded
programme until approximately three
seconds after pressing REC E to
start recording.
REC STOP H
Stop recording.
I
Playback the recorded programme.
H
Stop the programme in playback and
go back to the real time broadcast
(live).
F
Pause the programme in playback
(time shift recording continues).
• This function is released in 15
minutes.
S
Reverse (each time you press this
button, the reverse speed changes in
three levels).
J
Fast forward (each time you press this
button, the fast forward speed changes
in three levels).
K
Jump backward to the previous
chapter point*.
L
Jump forward to the next chapter
point*.
a
Playback will resume after jumping
backward by the time interval you set
in “Jump time setting” (Page 47).
b
Playback will resume after jumping
forward by the time interval you set in
“Jump time setting” (Page 47).
* Chapter points are fixed at 10 minute increments.
NOTE
• Refer to Regarding “Select recording device” (Page 27),
when the buttons for time shift do not work.
• Instead of pressing buttons on the remote control
unit, most of the operations shown to the left are also
available on the screen with the control panel. You can
call up this control panel by pressing CONTROL on the
remote control unit or select “Control (Time shift)” from
“HOME” > “TV Menu” > “Setup” > “Option” > “Option
for view”.
• The “Audio description setting” menu does not work
during time shift playback.
• When the amount of memory used for time shift reaches
“Full” and the blue point is around the left edge of the
bar (see
and
in the Counter section on page 47),
you cannot operate some functions (F (Pause), S
(Reverse), K (Jumping backward to the previous
chapter point) a (Jumping backward by the time
interval you set in “Jump time setting”)).
• Time shift recording stops if no operation detected for
three hours.
• When recording operations are not stopped manually,
recording will automatically stop after six hours.
• To release time shift, press REC STOP H, change the
DTV/SAT channel or change “INPUT”.
• Some functions do not work during time shift.
• As time shift is not actually a recording function,
recorded data will be reset when the MAIN POWER
switch is turned off or when the AC cord is unplugged.
• Time shift does not start automatically, but starts only
when REC E is pressed or when a time shift timer
setting is started.
• The PIN is required when you use the buttons such as
S
, J, K, L, a, b if you set the PIN and
any options for “Parental rating” except “None” are
selected.
• Do not disconnect the USB storage device used for
time shift during time shift operation.
Other useful features
46
Time shift recording
You can record the programme you are watching to
the registered USB storage device.
Starting time shift recording
Press REC E.
• The TV starts time shift recording.
NOTE
• You can also operate from the control panel by pressing
CONTROL
.
• You cannot switch the channel or the input source
during time shift recording.
• Time shift + overwrites existing data when a new
recording starts.
• The TV starts overwriting data in order from the oldest
recorded data when the memory for the USB storage
device is full. Use a high capacity USB storage device
when you want to record longer programmes.
• During time shift recording, the TV cannot display
photos or play music from the internet, Home network,
or USB storage devices.
• You cannot record programmes that have a copy
control signal that prohibits recording (they can only be
watched on the TV).
Completing time shift recording
1
Press REC STOP H.
• The screen prompt pops up.
2
Press c/d to select “Yes”, and then press ;.
• Time shift recording has completed.
NOTE
• You can also operate from the control panel by pressing
CONTROL
.
Time shift timer setting
You can set the time shift timer setting for
programmes you want to record.
NOTE
• To prevent the first part of the programme from being
cut, start recording the programme a few seconds
earlier than time set to start recording.
• When recording/viewing timer settings are set
continuously for multiple programmes, schedule the
recording of the previous programme to end earlier than
the end of the programme itself. Recording/viewing
timer setting of the next programme will start after that.
• A message will be displayed when the scheduled time
overlaps with an existing schedule. Make changes in
accordance with the on-screen instructions.
• It is not possible to newly schedule a recording that
overlaps with a timer setting that is currently running
(recording). When urgent setting of a schedule is
desired, stop recording before scheduling.
• Only one time shift timer setting can be set.
• A combined total of 16 timer settings (“Watch” and
“Time shift”) can be set.
EPG timer setup
You can select the programme you want to record
and set the timer setting with EPG (Pages 21 and 22).
Manual timer setting
“Manual timer setting” enables you to set date,
recording start/stop time and channel.
1
Press EPG.
2
Press B to display the timer list.
3
Press B again to display the “Manual timer
setting” screen.
4
Set date, recording start/stop time and channel.
5
Press c/d to select “Time shift”, and then
press ;.
• A confirmation screen will be displayed for the timer
setting.
6
Press c/d to select “Yes”, and then press ;.
Manual clock setting
When the TV cannot receive the time via digital
broadcast, perform “Manual timer setting” after
setting the clock .
Go to “HOME” > “TV Menu” > “View setting” >
“Individual setting” > “Clock setup” > “Time
adjustment”.
NOTE
• You cannot set the manual clock setting during time
shift recording.
Timer list
A list of programmes scheduled for recording can be
displayed.
1
Press EPG.
2
Press B to display the timer list.
Time shift playback
Playback recorded scenes of the programme being
recorded.
Press I during time shift recording.
• The last recorded programme can be replayed after
the end of recording.
• Press H to return the scene that is broadcasting.
NOTE
• You can also operate from the control panel by pressing
CONTROL
.
• Time shift playback may take a few moments to start.
• Time shift playback will stop and the TV will return to
normal broadcasting when a program is fast-forwarded
to a scene that is near to the scene currently being
broadcast. The timing at which it returns depends on
the speed of fast-forwarding.
Other useful features
Click on the first or last page to see other LC-60LE841E (serv.man2) service manuals if exist.