Sharp LC-60LE841E (serv.man2) User Manual / Operation Manual ▷ View online
31
Picture settings
Go to “HOME” > “TV Menu” > “Setup” >
“Picture”.
Setup
AV mode
Picture
OPC
[Off]
CH list
:Back
:Enter
Menu
Backlight
3D brightness boost
[Middle]
Picture
AV mode
“AV mode” gives you several viewing options to
choose from to best match the system environment,
which can vary due to factors like room-brightness,
type of programme watched or the type of image
input from external equipment.
Press a/b to select the desired mode, and
then press ;.
• You can also switch the mode on the “Picture” and
“Audio” menu screen by pressing #.
Item
AUTO
The TV automatically sets the
appropriate selection from the “AV
mode” menu depending on the
lighting conditions and the type of
programme watched.
STANDARD
For a highly defined image in a
normally bright room.
MOVIE
For viewing a movie in a darkened
room.
GAME
For playing of video games.
PC*
1
For PC.
USER
Allows you to customise settings as
desired. You can set the mode for
each input source.
x.v.Colour*
2
Produce realistic colour on the TV
screen unlike any other signal.
DYNAMIC
For a clear-cut image emphasising
high contrast for sports viewing.
DYNAMIC (Fixed)
For a clear-cut image emphasising
high contrast for sports viewing
(the “Picture” and “Audio” settings
cannot be adjusted).
STANDARD (3D)
Refer to page 64 for details.
MOVIE (3D)
GAME (3D)
I
“PC” is available only when selecting “HDMI 1”, “HDMI 2”,
“HDMI 3”, “HDMI 4” or “PC” from the “INPUT” menu.
J
“x.v.Colour” is available only when accepting an
“x.v.Colour” signal through an HDMI terminal.
NOTE
• If you select “AUTO”, some selections in the “AV mode”
menu may not be automatically set.
Picture
OPC
Automatically adjusts the brightness of the screen.
Item
Off
The brightness is fixed at the value set in
“Backlight”.
On
Automatically adjusts.
On:Display
Displays the OPC effect on the screen
while adjusting the brightness of the
screen.
NOTE
• When set to “On”, the TV senses the surrounding light
and automatically adjusts the backlight brightness.
Make sure no object obstructs the OPC sensor, which
could affect its ability to sense surrounding light.
• This function does not work when “3D brightness
boost” is set to “High” or “Low”.
Picture
Picture adjustments
Adjusts the picture to your preference with the
following picture settings.
Adjustment items
Selectable
items
c (Cursor)
d (Cursor)
Backlight
The screen dims
The screen
brightens
3D
brightness
boost
brightness
boost
Refer to page 65 for details.
Contrast
For less contrast
For more contrast
Brightness
For less brightness
For more brightness
Colour
For less colour
intensity
For more colour
intensity
Tint
Skin tones become
purplish
Skin tones become
greenish
Sharpness
For less sharpness
For more sharpness
Basic adjustment
32
Picture
Advanced
This TV provides various advanced functions for
optimising the picture quality.
Go to “HOME” > “TV Menu” > “Setup” >
“Picture” > “Advanced”.
C.M.S.-hue
This function adjusts the hue of a selected colour
using a six-colour adjustment system.
C.M.S.-saturation
This function increases or decreases the saturation
of a selected colour using a six-colour adjustment
system.
C.M.S.-value
This function adjusts the brightness of a selected
colour using a six-colour adjustment system.
Colour gamut range
Adjusts the range of a subset of colour to display
the image. Expanded colour gamut means more
colourfulness; images become more vivid.
Item
Standard
Standard colour gamut.
Expanded
More vivid colour with expanded
colour gamut.
NOTE
• This function is available only when selecting “MOVIE”
or “MOVIE (3D)” from the “AV mode” menu.
Colour temp.
Adjusts the colour temperature to give the best
white image.
Item
High
White with bluish tone.
Mid-High
Intermediate tone between “High”
and “Middle”.
Middle
Natural tone.
Mid-Low
Intermediate tone between “Middle”
and “Low”.
Low
White with reddish tone.
10 point setting*
Finely adjusts each colour
temperature between 1 to 10 points.
R/G/B Gain (LO),
R/G/B Gain (HI)
R/G/B Gain (HI)
Adjusts the white balance by
changing the value of each item.
* “10 point setting” is available only when selecting
“STANDARD”, “MOVIE”, “STANDARD (3D)”, or “MOVIE
(3D)” from the “AV mode” menu.
Motion enhancement
“Active motion 400/200” technologies provide
superior solutions for digital display picture quality
removing motion blur. Select “Motion enhancement”
setting (“Active motion 400”, “Active motion 200”,
“High”, “Low”, “Off”).
NOTE
• This effect is greater on fast moving images.
• These functions will have no effect in the following cases.
1) The type of signal received is a PC signal.
2) An OSD is being displayed.
3) Teletext is activated.
• If images appear blurred, set to “Off”.
Sub pixel control
Reproduces high-definition images with higher resolution.
Gamma adjustment
Selects the tone difference of the brightness and
darkness of the image according to the type of
programme watched from a maximum of e 2 to a
minimum of f 2.
Film mode
Automatically detects a film-based source (originally
encoded at 24 or 25 frames per second, depending
on the vertical frequency), analyses it and then
recreates each still film frame for high-definition
picture quality (“Advanced (High)”, “Advanced
(Low)”, “Standard”, “Off”).
Active contrast
Automatically adjusts the contrast of an image
according to the scene.
DNR
“DNR” produces a clearer image (“Auto”, “High”,
“Middle”, “Low”, “Off”).
NOTE
• This function may not be available depending on the
input signal type.
Range of OPC
The brightness level range of the OPC sensor’s
automatic adjustments can be set according to
your preferences. The adjustment range of the OPC
sensor can be set to a maximum of e 16 and a
minimum of f 16.
NOTE
• This function is available only when the “OPC” setting is
set to “On” or “On:Display”.
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• The maximum and minimum settings cannot be set to
the same number.
• Depending on the brightness of the surrounding light,
the OPC sensor might not operate if the adjustment
range is small.
Basic adjustment
33
Audio settings
Go to “HOME” > “TV Menu” > “Setup” >
“Audio”.
Setup
Bass
Auto volume
Audio
Treble
[Off]
STANDARD
CH list
:Back
:Enter
Menu
Balance
L30
R30
Audio
Auto volume
Different sound sources sometimes do not have
the same volume level, such as a programme and
its commercial breaks. This function reduces this
problem by equalizing levels.
Item
High
Strongly reduces the volume gaps among
different sound sources.
Middle
Low
Slightly reduces the volume gaps among
different sound sources.
Off
Does not adjust the volume gaps.
Audio
Audio adjustment
You can adjust the sound quality to your preference
with the following settings.
Item
c (Cursor)
d (Cursor)
Treble
For weaker treble
For stronger treble
Bass
For weaker bass
For stronger bass
Balance
Decrease audio
from the right
speaker
Decrease audio
from the left
speaker
Audio
Surround
This function produces a surround effect from the
speakers.
Item
3D Hall
Reproduces a concert hall experience with
realistic live surround sound based on
reverberant sounds measured in a concert
hall.
3D Movie
Reproduces a movie theater experience
with realistic live surround sound based on
reverberant sounds measured in a movie
theater.
3D
Standard
Standard
Creates three-dimensional surround sound
with detailed control of the signal phase.
On
Provides limited surround sound.
Off
Outputs normal sound.
Audio
Bass enhancer
This function allows you to enjoy bass-enhanced
sound.
Audio
Clear voice
This function emphasises speech against
background noise for greater clarity.
Audio
Audio description setting
This function allows you to enable output of audio
description if the TV receives a signal including
audio description.
NOTE
• When the “Audio description” is set to “On”, the audio
description sound is superimposed on the main audio
when you select a broadcast compatible with audio
description.
• If you do not clearly hear the sound for the visually
impaired, go to “HOME” > “TV Menu” > “Setup” >
“Audio” > “Audio description setting” > “Mix level”, and
select the upper level to turn up the volume.
• This function is available only for DTV broadcasts. This
“Audio description setting” menu is not displayed for
the ATV or the external inputs.
• The audio description sound is superimposed on
the main audio only when the sound is output on the
speaker sound output, headphone sound output and
sound for audio out output. The sound is not output on
the S/PDIF sound output and the SCART sound output.
• This function is not available for the AQUOS Audio
speaker system.
• This function does not work during time shift playback.
Basic adjustment
34
Power save settings
Go to “HOME” > “TV Menu” > “Setup” > “ECO”.
Setup
No signal off
ECO picture control
ECO
Energy save
CH list
:Back
:Enter
Menu
No operation off
[Disable]
[Disable]
[Off]
[On]
ECO
ECO picture control
This function automatically detects the image
source and decreases the power consumption while
keeping the brightness of the image unchanged.
NOTE
• This function does not work when “AV mode” is set to
“DYNAMIC (Fixed)”, “DYNAMIC” or “AUTO”.
• This function does not work when “Energy save” is set
to “Standard” or “Advanced”.
• This function is greyed out in 3D mode.
ECO
Energy save
This function enables you to reduce the backlight
brightness in order to decrease the power
consumption and increase the backlight life span as
shown in the following table.
Item
Standard
Reduces the backlight brightness.
Advanced
Reduces the backlight brightness more
than “Standard”.
Off
The backlight brightness is the same
value of your settings in the selected
“AV mode”.
NOTE
• This function does not work when “AV mode” is set to
“DYNAMIC (Fixed)”.
• This function does not work when “3D brightness
boost” is set to “High” or “Low”.
E
“Energy save” status icons
Icon
Description
“Energy save” is set to “Standard”.
“Energy save” is set to “Advanced”.
When “Energy save” is set to “Standard” or
“Advanced”, “Energy save” status icons appear
in the “Picture” menu and channel information
windows.
ECO
No signal off
When set to “Enable”, the TV will automatically
enter standby mode if there is no signal input for 15
minutes.
NOTE
• Even if a TV programme finishes, this function may not
operate because of interference from other TV stations
or other signals.
ECO
No operation off
The TV will automatically enter standby mode if no
operations are performed in three hours if “Enable”
is selected.
NOTE
• Five minutes before the TV enters standby mode, the
remaining time displays every minute.
ECO
Sleep timer
Allows you to set a time when the TV automatically
enters standby mode. You can set the time span for
entering standby mode after selecting “Change”.
NOTE
• Select “Off” to cancel the sleep timer.
• When the time has been set, countdown automatically
starts.
• Five minutes before the preset of time expires, the
remaining time displays each minute.
Basic adjustment
Click on the first or last page to see other LC-60LE841E (serv.man2) service manuals if exist.