Sharp LC-52XL1E (serv.man10) User Manual / Operation Manual ▷ View online
7
Remote control unit
Quick guide
1
4
5
6
7
8
7
8
9
10
11
12
13
14
15
16
17
16
17
18
19
19
20
21
22
23
23
2
3
NOTE
• The symbols
• The symbols
8, 9 and 0
indicate that the buttons become
available in respective operating mode
when using as a universal remote
control.
available in respective operating mode
when using as a universal remote
control.
1
B (TV Standby/On) 890
(Page
8)
2 LIGHT
D 890
When pressed buttons that are
frequently used (P
frequently used (P
r/s, i
k/l,
0 - 9
numeric buttons,
A and b)
will light. The lighting will turn off if
no operations are performed within
about 5 seconds. This button is used
for performing operations in low-light
situations.
no operations are performed within
about 5 seconds. This button is used
for performing operations in low-light
situations.
3 FUNCTION
890
Press this button briefl y (for more than
0.2 second), and the remote control
switches for DVD, SetTopBox or VCR
operation and currently controlled device
will be indicated in the LCD window.
0.2 second), and the remote control
switches for DVD, SetTopBox or VCR
operation and currently controlled device
will be indicated in the LCD window.
See page 37 for how to use this unit as
a universal remote control.
a universal remote control.
4 LCD
window
890
This screen shows which device you are
currently controlling. (TV, DVD, STB or
VCR).
currently controlling. (TV, DVD, STB or
VCR).
5
0 – 9
9
Set the channel in TV and DTV mode.
Enter the desired numbers or letters.
Set the page in Teletext mode.
6
A (Flashback)
Press to return to the previous image in
normal viewing mode.
normal viewing mode.
7 DTV
MENU
DTV: Display DTV Menu screen.
8 DTV
Press to access DTV mode while
watching other input sources, and vice
versa.
watching other input sources, and vice
versa.
(Will not work if you were watching
DTV immediately before turning off the
TV. In this case fi rst select any other
input source except DTV using the
DTV immediately before turning off the
TV. In this case fi rst select any other
input source except DTV using the
b
button.)
9
i (
k/l) (Volume) 890
Increase/decrease TV volume.
10
e (Mute) 890
TV sound on/off
11
Colour (Red/Green/Yellow/Blue)
TELETEXT: Select a page. (Page 25)
The coloured buttons are used to select
correspondingly to the coloured items in
the menu screen.
correspondingly to the coloured items in
the menu screen.
12
a/b/c/d (Cursor) 8
Select a desired item on the setting
screen.
screen.
OK
89
TV/DTV/DVD/STB: Execute a command
within the menu screen.
within the menu screen.
TV/DTV: Display the station list in
analogue mode and the programme list
in DTV mode.
analogue mode and the programme list
in DTV mode.
13 END
Exit the menu screen.
15
b (INPUT SOURCE)
Select an input source.
(TV, DTV, EXT1, EXT2, EXT3, EXT4,
EXT5, EXT6) (Page 22)
EXT5, EXT6) (Page 22)
16
MENU
8
TV: MENU screen on/off. (Page 15)
DVD: Title menu on/off.
17
EPG
DTV: To display EPG (Electronic
Programme Guide) screen.
Programme Guide) screen.
18
P (
r/s) 890
Select the TV channel.
In analogue TV mode, external input
sources (EXT 1 - 6) can also be
selected.
sources (EXT 1 - 6) can also be
selected.
19
p (Display information)
(Pages 21, 22, 33 and 34)
20
6 (Return)
Return to the previous menu screen.
21
Buttons for other useful features
Flip open the remote control cover on
the front.
the front.
RADIO
DTV: Switch between RADIO and DTV
mode.
mode.
SURROUND
Surround effects on/off.
7 (Sound mode)
Select the sound multiplex mode.
(Page
9)
AV
MODE
Select a video setting. (Page 22)
SLEEP
Set the sleep timer on (in units of 30
min. up to max. 2hr. 30min) and off.
min. up to max. 2hr. 30min) and off.
(If the “Time and date” screen is
displayed, enter the time and date as
explained on page 21, and set the sleep
timer again.)
displayed, enter the time and date as
explained on page 21, and set the sleep
timer again.)
OPC
To switch the Optical Picture Control on
and off. (Page 22)
and off. (Page 22)
DEMO
Demonstrate the 100Hz effects in a dual
screen format. (Page 17)
screen format. (Page 17)
f (Wide modes)
Select the wide mode. (Page 23)
22
AQUOS LINK buttons
80
If external equipment such as AQUOS
BD Player is connected via HDMI cables
and AQUOS LINK compatible, you can
use these AQUOS LINK buttons. See
page 12 for details.
BD Player is connected via HDMI cables
and AQUOS LINK compatible, you can
use these AQUOS LINK buttons. See
page 12 for details.
In DVD or VCR mode, press OPTION to
pause the picture.
pause the picture.
Not available when operating STB
except powering on the device.
except powering on the device.
23
REC
E and REC STOP H buttons
80
14 Buttons
for
teletext
1 (Subpage)
(Page
25)
m (Teletext)
TV: Display the analogue teletext. (Page
24)
24)
DTV: Select DTV data broadcasting and
TELETEXT. (Page 35)
TELETEXT. (Page 35)
3 (Freeze/Hold)
(Page
25)
k (Reveal hidden Teletext)
(Pages 24 and 25)
[ (Subtitle for Teletext)
TV/External: Subtitle on/off. (Page 25)
DTV: Display the subtitle selection screen.
(Page 35)
(Page 35)
v (Top/Bottom/Full)
Set the area of magnifi cation in analogue
teletext mode. (Page 25)
teletext mode. (Page 25)
LC-52XL1E_gb_a.indd 7
LC-52XL1E_gb_a.indd 7
2007/04/25 14:45:35
2007/04/25 14:45:35
8
Quick guide
Turning on the power
Press
a on the TV.
NOTE
• If you are not going to use this TV for a long period of time,
• If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the power outlet.
• Weak electric power is still consumed even when
a is
turned off.
• In DTV input mode, if the power is turned off immediately
after a setting change from the menu screen, the new
setting or channel information may not be memorised.
setting or channel information may not be memorised.
Initial auto installation (Analogue)
When the TV powers on for the fi rst time after
purchase, the initial auto installation (Analogue) is
invoked. Follow the menus and make the necessary
settings one after another.
purchase, the initial auto installation (Analogue) is
invoked. Follow the menus and make the necessary
settings one after another.
NOTE
• To reconfi gure the initial auto installation settings, go to
• To reconfi gure the initial auto installation settings, go to
“Channels” and run “Search wizard” from the Setup menu.
(Page 19)
(Page 19)
Setting the on-screen display language
1 Press a/b/c/d to select the desired language
listed on the screen.
2 Press OK to enter the setting.
Setting the country (“Location of TV set” screen)
1 Press a/b/c/d to select your country or area
listed on the screen.
2 Press OK to enter the setting.
• An overview of settings to be used for auto search
• An overview of settings to be used for auto search
displays.
Press OK to start the search.
• The TV searches for, sorts and stores all the
receivable TV stations according to their settings and
the connected antenna.
the connected antenna.
• To abort the initial auto installation in progress, press
END
.
When the auto sorting is completed, the item
“Decoder” displays. Press
“Decoder” displays. Press
c/d to select “EXT
1” or “EXT 2”, and then press OK.
• Make sure to select the terminal (EXT 1 or 2) to which
the decoder is connected.
A message appears indicating that the fi rst
installation is successfully completed. Press
OK, if necessary.
installation is successfully completed. Press
OK, if necessary.
• If a recording device with AV-Link is connected to
EXT 2, the TV automatically starts transferring the
station list data to the recording device.
station list data to the recording device.
1
2
3
4
5
Standby mode
Press
B on the remote control unit when the TV is on.
• The TV enters standby mode and the image on the screen
disappears.
• The
B indicator on the TV changes from green to red.
• To completely turn off the power to the TV, unplug the AC
cord from the AC outlet. However, do not unplug the AC
cord unless otherwise instructed.
cord unless otherwise instructed.
Off
Display status indicator
Power off
Initial auto installation (DTV)
Digital Video Broadcasting is a transmission scheme.
It is much more than a simple replacement for existing
analogue television transmission. DVB provides more
stations, clearer picture quality and other services
displayed on the screen. It also allows a range of new
features and services including subtitles and multiple
audio tracks.
It is much more than a simple replacement for existing
analogue television transmission. DVB provides more
stations, clearer picture quality and other services
displayed on the screen. It also allows a range of new
features and services including subtitles and multiple
audio tracks.
To watch DTV broadcasts, follow the procedures below
to scan all available services in your area.
to scan all available services in your area.
NOTE
• Make sure to perform Initial auto installation
• Make sure to perform Initial auto installation
(Analogue) outlined in the preceding section as well,
even if you intend to view only DTV broadcasts.
even if you intend to view only DTV broadcasts.
Press DTV (or
b, then
a/b to select “DTV”,
and then press OK) to access the DTV mode.
Press DTV MENU and the DTV Menu screen
displays.
displays.
Press
c/d to select “Installation”.
Press
a/b to select “Auto Installation”, and
then press OK.
If you have already set the PIN, enter it here. If
not, enter the factory preset PIN “1234”.
not, enter the factory preset PIN “1234”.
• See page 20 for setting PIN.
• A confi rmation message displays. Press
• A confi rmation message displays. Press
c/d to
select “Yes”, and then press OK to start the search.
The TV starts scanning all available DTV and
radio services in your area.
radio services in your area.
NOTE
• The language and country settings used in this operation
• The language and country settings used in this operation
are the settings you have already set while executing
the Initial auto installation (Analogue). If you want to
reconfi gure the country setting, for instance after moving
to another country, conduct “Search wizard” from the
Analogue Menu again. (Page 19)
the Initial auto installation (Analogue). If you want to
reconfi gure the country setting, for instance after moving
to another country, conduct “Search wizard” from the
Analogue Menu again. (Page 19)
• The DTV services are searched and stored according to the
channel number information embedded in the TV signal (if
available). If the information is not available, the services are
stored according to the order in which they were received.
available). If the information is not available, the services are
stored according to the order in which they were received.
If you would like to sort the order, it is possible to arrange it
as explained in page 28.
• To cancel the scan in progress, press END.
• You cannot select any DTV-related menu items unless “Auto
• You cannot select any DTV-related menu items unless “Auto
Installation” has been completed.
1
2
3
4
4
5
Green
Red
The TV is in standby mode.
The TV is on.
LC-52XL1E_gb_a.indd 8
LC-52XL1E_gb_a.indd 8
2007/04/25 14:45:36
2007/04/25 14:45:36
9
Press
a/b/c/d or 0 – 9 to select the desired
station in the station list, and then press OK to
tune in the station.
tune in the station.
• Press Blue to sort the list according to “Alphabetical”
or “Numerical”.
• Refer to the following table for how each numeric
button is assigned a set of characters.
NOTE
• This function cannot be operated when the selected input
• This function cannot be operated when the selected input
source is HDMI.
To delete, move, and rename stations from
the station list
the station list
While in the station list, press Yellow (Change
stations).
stations).
E
Delete
Select a station to delete, and then press Red
(Delete). Mark more stations with
(Delete). Mark more stations with
a/b/c/d or
0 – 9, if desired. Confi rm with OK or cancel with
Red.
Red.
E
Move
Select a station to move, and then press Yellow
(Move). Mark more stations with
(Move). Mark more stations with
a/b/c/d or
0 – 9, if desired. Press OK to fi nish marking.
Press
Press
a/b/c/d or 0 – 9 to select the position
to move to. Confi rm with OK or cancel with
Yellow.
Yellow.
• Make sure to select the appropriate block of channels
or destination when moving.
E
Rename
Select a station to rename, and then press Blue
(Rename). Press any of the numeric buttons 0
– 9 to select the desired character. Remember
to press and toggle the numeric button quickly,
for the transition to the next digit is rather quick.
Repeat until the new name is fully spelt out.
Confi rm with OK or cancel with Blue.
(Rename). Press any of the numeric buttons 0
– 9 to select the desired character. Remember
to press and toggle the numeric button quickly,
for the transition to the next digit is rather quick.
Repeat until the new name is fully spelt out.
Confi rm with OK or cancel with Blue.
• The name can be up to 8 characters.
2
Quick guide
Channel selection using the station
list (Analogue)
list (Analogue)
This section explains how to change/delete/
move/rename stations using the analogue
Station List. If you are watching DTV, refer
to the “Using the digital programme list”
section. (Page 34)
move/rename stations using the analogue
Station List. If you are watching DTV, refer
to the “Using the digital programme list”
section. (Page 34)
You can also select the desired channel from station
list instead of using 0 – 9 numeric buttons or P (
list instead of using 0 – 9 numeric buttons or P (
r/s).
In analogue TV mode, press OK when no other
menu screen is active.
menu screen is active.
1
Station list
Numerical
0
1
2
3
4
1
2
3
4
DTV
EXT1
EXT2
EXT3
EXT4
EXT5
EXT6
VIDEO
ARD
ZDF
SAT.1
RTL
EXT1
EXT2
EXT3
EXT4
EXT5
EXT6
VIDEO
ARD
ZDF
SAT.1
RTL
5
6
7
8
9
6
7
8
9
10
11
12
13
14
15
16
11
12
13
14
15
16
VOX
S-RTL
N-TV
DSF
9LIVE
PRO7
RTL2
WDR 3
BR
HR
MDR 3
KIKA
S-RTL
N-TV
DSF
9LIVE
PRO7
RTL2
WDR 3
BR
HR
MDR 3
KIKA
Entering characters using the 0 – 9 buttons
Assigned characters and numbers
Buttons
W, X, Y, Z, 9
0
1,
k, l, . (dot), (space)
A, B, C, 2
D, E, F, 3
G, H, I, 4
J, K, L, 5
M, N, O, 6
P, Q, R, S, 7
T, U, V, 8
Using
7 on the remote control unit
DTV mode:
Press
Press
7 to open the multi audio screen. (Page 35)
Analogue TV mode:
Each time you press
Each time you press
7, the mode switches as
illustrated in the following tables.
NICAM TV broadcasts selection
Signal
Selectable items
Stereo
Stereo, Mono!
Bilingual
Dual-channel Sound 1, Dual-channel Sound 2,
Dual-channel Sound 1+2, Mono!
Dual-channel Sound 1+2, Mono!
Monaural
NICAM, Mono!
A2 TV broadcasts selection
Signal
Selectable items
Stereo
Stereo, Mono!
Bilingual
Dual-channel Sound 1, Dual-channel Sound 2,
Dual-channel Sound 1+2
Dual-channel Sound 1+2
Monaural
Mono
NOTE
• When no signal is input, the sound mode will display
• When no signal is input, the sound mode will display
“Mono”.
• “Mono!” indicates that you have manually changed to FM
mono.
9
0
1
2
3
4
5
6
7
8
LC-52XL1E_gb_a.indd 9
LC-52XL1E_gb_a.indd 9
2007/04/25 14:45:37
2007/04/25 14:45:37
10
VIDEO
S-VIDEO
L-AUDIO-R
AV OUTPUT
Using external equipment
Setting the input source
To view external source images,
select the input source using
select the input source using
b on
the remote control unit. (Page 22)
NOTE
• The cables marked with * are
• The cables marked with * are
commercially available items.
• TV-OUT from EXT 1 outputs DTV
image when DTV is selected as the input.
Otherwise it constantly outputs analogue TV image.
Otherwise it constantly outputs analogue TV image.
• MONITOR OUTPUT from EXT 2 outputs audio only when
EXT 4, 5 and 6 is selected as the input.
Connecting a VCR
You can use the EXT 2 terminal when connecting a
VCR and other recording equipment.
If your VCR supports TV-VCR advanced AV Link
systems, you can connect the VCR using the fully-
wired SCART cable.
VCR and other recording equipment.
If your VCR supports TV-VCR advanced AV Link
systems, you can connect the VCR using the fully-
wired SCART cable.
NOTE
• If the above is your connection, make sure to select
• If the above is your connection, make sure to select
“EXT 2” under the menu item “Decoder” when you
run the Initial auto installation (Analogue) (Page 8) or
when changing the setting later (Page 18).
run the Initial auto installation (Analogue) (Page 8) or
when changing the setting later (Page 18).
• TV-VCR advanced AV Link systems may not be compatible
with some external sources.
VCR
Decoder
SCART cable*
SCART cable*
EXT 2 (recommended)
VIDEO
S-VIDEO
L-AUDIO-R
AV OUTPUT
Connecting a DVD player
You can use the EXT 3, 4, 5 (HDMI) or 6 (HDMI)
terminals when connecting to a DVD player and other
audiovisual equipment.
terminals when connecting to a DVD player and other
audiovisual equipment.
DVD player
EXT 3
A game console, camcorder and some other
audiovisual equipment are conveniently connected
using the EXT 3 terminals.
audiovisual equipment are conveniently connected
using the EXT 3 terminals.
NOTE
• EXT 3: The S-VIDEO terminal has priority over the VIDEO
• EXT 3: The S-VIDEO terminal has priority over the VIDEO
terminals.
Connecting a game console or
camcorder
camcorder
Game console Camcorder
or
S-video cable*
Composite
video cable*
video cable*
AUDIO cable*
EXT 3
or
AUDIO cable*
S-video cable*
Composite
video cable*
video cable*
YP
B
(
C
B)
P
R
(
C
R)
COMPONENT
EXT 4
ø 3.5 mm stereo minijack cable*
Component
cable*
cable*
3 RCA to 15-pin
D-sub adapter
(Supplied)
D-sub adapter
(Supplied)
DVD player
NOTE
• EXT 3: The S-VIDEO terminal has priority over the VIDEO
• EXT 3: The S-VIDEO terminal has priority over the VIDEO
terminals.
NOTE
• When connecting an HDMI-DVI conversion adapter/cable
• When connecting an HDMI-DVI conversion adapter/cable
to the HDMI terminal, the image may not come in clearly.
DVD player
HDMI-DVI conversion adapter/
cable*
When using an HDMI-DVI
conversion adapter/cable,
input the Audio signal here.
If not, use EXT 6.
conversion adapter/cable,
input the Audio signal here.
If not, use EXT 6.
EXT 5
DVD player
HDMI cable*
EXT 6
INPUT SOURCE
TV
DTV
EXT1
EXT2
EXT3
EXT4
EXT5
EXT6
LC-52XL1E_gb_a.indd 10
LC-52XL1E_gb_a.indd 10
2007/04/25 14:45:38
2007/04/25 14:45:38
Click on the first or last page to see other LC-52XL1E (serv.man10) service manuals if exist.