DOWNLOAD Sharp LC-52XL1E (serv.man10) Service Manual ↓ Size: 4.63 MB | Pages: 48 in PDF or view online for FREE

You can select the picture size. Selectable picture size 
varies with the type of signal received.

Basically, if you set Auto format to “on” in the Setup 
menu, the optimum Wide mode is automatically chosen 
for every broadcast. You can however, change the 
screen format manually as explained below.

NOTE
•  Aside from manually changing the Wide modes as 

explained herein, the TV may detect and select the 
optimum Wide mode according to the signal received.

Press 

f.

•  The Wide modes menu displays.
•  The menu lists the wide mode options selectable for 

the type of video signal currently received.

Press 

f or 

a/b while the Wide modes menu 

displays on the screen.

•  As you toggle down the options, each is immediately 

refl ected on the screen. No need to press OK.

: For 16:9 squeeze pictures.

: For 4:3 “standard” pictures. A side bar appears 

on each side.

: In this mode the picture is progressively 

stretched toward each side of the screen.

: For 16:9 letterbox pictures. Bars may 

appear on the top and bottom with some programmes.

: For 14:9 letterbox pictures. Bars may 

appear on the top and bottom with some programmes.

: Display with the Overscan image. Crop all sides of 

screen.

: Display with the Underscan image. 

(Display with the High-Defi nition image compressed 
optimally. Noise may appear on the edge of the screen 
with some programmes.)

You can select the picture size.

Press 

f.

•  The Wide modes menu displays.

Press 

f or 

a/b to select a desired item on 

the menu.

NOTE
•  Connect the PC before making adjustments. (Page 11)
•  Selectable picture size may vary with input signal type.

: An image fully fi lls the screen. 

: Keeps the original aspect ratio in a full screen 

display.

LC-52XL1E_gb_b.indd   23

LC-52XL1E_gb_b.indd   23

2007/04/25   14:46:23

2007/04/25   14:46:23

Teletext broadcasts pages of information and 
entertainment to specially equipped television sets. 
Your TV receives Teletext signals broadcast by a TV 
network, and decodes them into graphical format for 
viewing. News, weather and sports information, stock 
exchange prices and programme previews are among 
the many services available.

Select a TV channel or external input source 
providing the Teletext programme.

Press 

m to display the Teletext.

•  Many stations use the TOP operating system, while 

some use FLOF (e.g. CNN). Your TV supports both 
these systems. The pages are divided into topic 
groups and topics. After switching on the teletext, up 
to 2000 pages are stored for fast access.

Press 

m again to display the Teletext on the 

right screen and the normal image on the left 
screen.

•  Each time you press 

m, the screen switches as 

shown below.

•  If you select a programme with no Teletext signal, “No 

text” displays.

•  The same message displays during other modes if no 

Teletext signal is available.

  

100  100   ARD-Text           10.09.04       14:14:42

ARD TEXT
Teletext im Ersten

Bulmahn: Bildung statt Eigenheim . . . . . . . .   

120

Wird auch der Nahverkehr teurer? . . . . . . . .   

121

Australien: Keine Zugeständnisse  . . . . . . . .   

122

Tote bei Zugunglück in Schweden . . . . . . . .   

532

Tennis: Haas unterliegt Hewitt . . . . . . . . . . . .  204
Formel 1: Schumacher erneut vorne . . . . . . .  213

Tagesschau . .  110/112 

Kultur. . . . . . . . .   

500

Wetter. . . . . . . . . . .  170 

Gesellschaft . . . 

530

Sport. . . . . . .   200/600 

Lotto/Toto . .   

666

TV Guide . . . 

300/400 

Wirtschaft. . . . . .  

700

                  Internet: www.ard-text.de

–        

+

Inhalt

 

 

    tagesschau

Index
> 101

NOTE
•  Teletext will not work if the selected signal type is RGB. 

(Page 18)

 

While in the analogue teletext mode, press 
MENU

 to display the Teletext Menu.

Menu

Reveal

Setup

Newsflash

If you activate “Newsfl ash” in the teletext menu, the 
current page is hidden. The 

m symbol at the top left 

shows that the newsfl ash function is enabled (you are 
in teletext mode). If its contents are updated and it is a 
small news window, then this is displayed. If, however, 
it is a page that fi lls the screen, the symbol is shown in 
blue and the page can be displayed by pressing OK.

The teletext contains hidden information e.g., for quiz 
questions or VPS times in programme preview pages. 
This is the same function as pressing 

k.

LC-52XL1E_gb_b.indd   24

LC-52XL1E_gb_b.indd   24

2007/04/25   14:46:25

2007/04/25   14:46:25

Sub-title pages

Teletext subtitles

HiText

with normal size

yes

Standard

Russian

Greek

Character set

Menu

Setup

Reveal

Newsflash

v (Top/
Bottom/Full)

k (Reveal 
hidden Teletext)

3 (Freeze/
Hold)

[ (Subtitle for 
Teletext)

1 (Subpage)

Select a group or block of pages displayed 
in the coloured brackets at the bottom of the 
screen by pressing the corresponding Colour 
(Red/Green/Yellow/Blue)

 on the remote 

control unit.

Directly select any page from 100 to 899 by 
using 0 - 9.

Switch the Teletext image to Top, Bottom or 
Full.

Reveal or conceal hidden information such as 
an answer to a quiz.

Stop updating Teletext pages automatically or 
release the hold mode. 

Display the subtitle or exit the subtitle screen.
•  Subtitle will not be displayed when the service 

does not contain the subtitle information.

User for LC-46XL1E, LC-52XL1E:
•  Subtitle is set to off when the power is 

turned on.

User for LC-46XL1S, LC-52XL1S:
•  Subtitle is set to on when the power is 

turned on.

Reveal or hide subpages.
• 

c/d button: Select subpage.

•  Red button: Move to the previous page.
•  Green button: Move to the following page.
•  These two buttons are shown on the screen 

by the signs 

l and k.

E 

Some stations provide teletext subtitles for the hearing 
impaired. For every station you can enter the teletext 
page on which subtitles can be found. The factory 
setting for all stations is page 150. This function can be 
started by pressing 

[ with the menu screen open.

E

  Teletext subtitles

This function displays subtitles transmitted via teletext 
in normal or double size.

E

  Character set

You can set the teletext language display to the 
language listed. This is necessary, for example, for 
Turkish or Polish teletext.

E

  HiText

HiText (Level 2.5) can be used to select an improved 
teletext video display. This will be effective as soon as 
the TV station broadcasts the required information.

LC-52XL1E_gb_b.indd   25

LC-52XL1E_gb_b.indd   25

2007/04/25   14:46:26

2007/04/25   14:46:26

1 Language

•  To customise the language preference for audio and 

MHEG5 application.

2  Programme Setup

•  To confi gure various settings for each service. These 

include: Fav(ourite), Lock, Move, Move To, Skip, 
Select, Erase, Label, and View functions. 

3  Installation

•  To scan all services available in your area, or to label/

erase/re-scan the selected carrier.

4  System Setup

•  To confi gure On-Screen Display and Child Lock 

settings. 

5  Accessories

•  To display the current version of the software or to 

allow the software upgrade to take place.

6

 

Common Interface
•  To display the current Common Interface details.

7  Navigation buttons

•  To navigate within the DTV Menu screen.

[: 

Press to display the subtitle selection screen.

m: 

Press to display TELETEXT or start the MHEG5 
presentation, if available.

: 

Aside from direct channel entry, each of the 
1 - 9

 numeric buttons have a unique function 

assigned in the Programme Setup screen. 

: 

Press to access DTV mode.

: 

Press to open the EPG screen.

: 

Press to switch between TV and RADIO mode.

 

•  Due to large variation in transmitted volume 

levels in RADIO mode, some stations will 
produce distortion if the volume level is set 
too high.

7: 

Press to open the multi audio screen.

:  Press to open or close the DTV Menu screen.

p: 

Press to open the service banner or view 
detailed information from the EPG screen.

a/b/c/d:  Press to select a desired item on the screen or 

adjust a selected item.

: 

Press to go to the next step or complete the 
setting.

 

Press to open the Programme list when no 
other menu screen is active. (Except external 
input.)

: 

Press to exit the current menu screen without 
saving the changes.

: 

Each of the coloured buttons have a unique 
function assigned in the menu screen. 

6 (Return):  Press to return to the previous step.

Use the following buttons on the remote control unit to 
operate the DTV Menu.

Press DTV or 

b to access the DTV mode. 

Press DTV MENU and the DTV Menu screen 
displays.

Press 

c/d to select the desired menu, and 

then press OK if necessary.

•  From this point, menu operations differ depending on 

the item you are going to adjust. See the respective 
section of the menu operation.

•  You cannot select any DTV-related menu items 

unless “Auto Installation” has been completed.

• Press RADIO to switch between DTV and Radio 

mode.

•  To exit the current screen without saving the change, 

press END.

1

3

4

6

5

2

7

LC-52XL1E_gb_c.indd   26

LC-52XL1E_gb_c.indd   26

2007/04/25   14:46:51

2007/04/25   14:46:51