DOWNLOAD Sharp LC-45GD1E (serv.man45) Service Manual ↓ Size: 1.01 MB | Pages: 18 in PDF or view online for FREE

01 SAT.1

02 PR07

03 KABEL

01 SAT.1

02 PR07

03 KABEL

01 55.25

02 85.25

03 102.25

When the System powers on for the first time after
purchase (see page 20), the initial auto installation is
invoked. You can automatically set language, country
and channels in successive operations.

1 Press a/b/c/d to select your country

or area listed on the screen.

2 Press OK to enter the setting.

• The programme auto search starts at the same

time.

1 Press  a/b/c/d to select the desired

language listed on the screen.

2 Press OK to enter the setting.

After this setting, auto search starts with the following
order.

1 Programme auto search
2 Auto labelling
3 Auto sorting
4 Preset download

You do not need to do anything during the auto search.

• The illustrations and on-screen displays in this manual

are for explanation purposes and may vary slightly from
the actual operations.

After finding TV channels, the System starts naming
each TV channel found.

• The System can only name channels where the channel

labelling information is provided. If no channel labelling
information is provided the System only displays the
channel number, leaving the channel name blank.

Channel auto search finds all channels viewable in
your area.

• If no channel is found, “No programme found.” displays.

And the auto installation finishes.

When auto sorting finishes, the System automatically
downloads and stores each sorted channel from VCR.

• When a VCR is connected via INPUT 2, the System sends

all preset channel information to the VCR. (See page 60.)

• “Auto Installation completed.” displays. After that, the

screen changes to the auto installation menu.

When channel auto labelling finishes, the System starts
sorting the labelled channels.

The setup menu disappears and you can watch the
programme on channel 1.

• The initial auto installation functions only once. If the initial

auto installation is not completed, (ex: When menu screen
disappeared by not operating for a few minutes, when
the power shut down, etc.), try Auto Installation from the
set up menu. (See page 26.)

• The initial auto installation stops by pressing RETURN.

Austria
Belgium
Denmark
Finland
France
Germany
Greece
Ireland
Italy
Luxembourg
Netherlands
Norway

Poland
Portugal
Russia
Spain
Sweden
Switzerland
Turkey
United Kingdom
West Europe
East Europe

Dutch
English
Finnish
French
German

Italian
Portuguese
Spanish
Swedish
Turkish

LC-45GD1E(E)-b

04.9.27, 9:59 AM

14

Digital Video Broadcasting is a transmission scheme.
It is much more than a simple replacement for existing
analogue television transmission. DVB provides more
stations, clearer picture quality and other services to
be displayed on screen. It also allows a range of new
features and services including subtitling and multiple
audio tracks.

Press a/b to select the country where you
are located.

Press OK to enter the setting.

• Installation screen displays. Press OK to go to

the next step.

Press a/b to select “Service scan”, and then
press OK.

• Search screen displays.

Search

Press  OK, and Search finds all the digital
broadcasting channels viewable in your area.

• The Search menu disappears and you can

watch the programme.

Press DTV to switch to the DTV mode.

For viewing digital broadcasts, please follow the
procedure below to setup.

• In DTV mode, some menu items displayed in black cannot

be selected.

• If you exit DTV mode while Virgin mode is still incomplete,

go back to step 1 and try it again.

When you cannot find the country you live
in, select the country from the list which
shares the same time zone.

Austria
Belgium
Denmark
Finland
France
Germany
Greece
Italy
Luxembourg

Netherlands
Norway
Portugal
Spain
Sweden
Switzerland
Turkey
United Kingdom

LC-45GD1E(E)-b

04.9.27, 9:59 AM

15

STANDBY/ON indicator

MAIN POWER button (

a

)

OPC sensor*

INPUT button

VOLUME buttons

( il/k )

CHANNEL buttons
(Ps/r)

Remote control sensor

*OPC: Optical Picture Control

(See page 44.)

Remote Control indicator

OPC indicator

LC-45GD1E(E)-b

04.9.27, 9:59 AM

16

INPUT 1 (SCART)

INPUT 3
(Y, P

B

(C

B

)

, 

 P

R

(C

R

))

INPUT 2  (SCART)

DISPLAY OUTPUT 3

DISPLAY OUTPUT 1

AC INPUT

RS-232C**

INPUT 3 (SCART)

AV OUTPUT (VIDEO)

AV OUTPUT
(AUDIO)

* Press RESET if the system cannot return to its original state after performing various operations.

This will reset the System as shown below.

• AV MODE resets to USER.
• Analogue TV channel resets to channel 1.
• Dual screen resets to normal.
• Audio setting initialises.
• Dolby Virtual resets to Off.
• Image position is initialised.

** Press SYSTEM RESET if the system does not operate after starting up.

• Pressing RESET will not work if the System is in standby mode (indicator lights red).
• Pressing RESET will not delete channel preset and PIN. See page 73 for resetting the PIN when you know it. See page

85 for initialising to the factory preset values when you forget your PIN.

ANTENNA INPUT

DISPLAY OUTPUT 2

DC OUTPUT

DIGITAL AUDIO
OUTPUT*

SPEAKER-B

DIGITAL ANTENNA INPUT

DIGITAL ANTENNA OUTPUT

*Connect a digital audio equipment.
**Provided for command from PC (see pages 80 and 81).

COMMON
INTERFACE slot

RESET*

POWER button

INPUT 4 (S-VIDEO)

INPUT 4 (VIDEO)

SYSTEM RESET**

INPUT 4 (AUDIO L/R)

How to open the door.

STANDBY/ON indicator

PC CARD slot

CARD indicator

Headphone
(When connecting headphones, the sound from the speakers is muted.)

INPUT 5 (AUDIO)

INPUT 5 (DVI-I)

CENTRE CHANNEL
INPUT

• Still image mode deactivates.
• Teletext mode resets to normal.
• Speaker setting resets to SPEAKER-A.
• Audio Out setting resets to Fixed.
• Centre Channel Input setting resets to Off.
• Audio Only setting resets to Off.

LC-45GD1E(E)-b

04.9.27, 9:59 AM

17