Sharp LC-42XD1E (serv.man12) User Manual / Operation Manual ▷ View online
23
DTV On-Screen Display
Example
1 Language
• To customise the language preference for audio and
MHEG5 application.
2 Programme Setup
• To confi gure various settings for each service. These
include: Fav(ourite), Lock, Move, Move To, Skip,
Select, Erase, Label, and View functions.
Select, Erase, Label, and View functions.
3 Installation
• To scan all services available in your area, or to label/
erase/re-scan the selected carrier.
4 System Setup
• To confi gure On-Screen Display and Child Lock
settings.
5 Accessories
• To display the current version of the software or to
allow the software upgrade to take place.
6
Common Interface
• To display the current Common Interface details.
• To display the current Common Interface details.
7 Navigation buttons
• To navigate within the DTV Menu screen.
DTV menu operations
[:
Press to display the subtitle selection screen.
m:
Press to display TELETEXT or start the MHEG5
presentation, if available.
presentation, if available.
-
:
Aside from direct channel entry, each of the
-
numeric buttons have a unique
function assigned in the Programme Setup
screen.
screen.
DTV
:
Press to access DTV mode.
EPG
:
Press to open the EPG screen.
ESG
:
Press to open the ESG screen.
RADIO
:
Press to switch between TV and RADIO mode.
• Due to large variation in transmitted volume
levels in RADIO mode, some stations will
produce distortion if the volume level is set
too high.
produce distortion if the volume level is set
too high.
2:
Press to open the multi audio screen.
DTV MENU
: Press to open or close the DTV Menu screen.
LIST
:
Press to open the Programme List.
p:
Press to open the service banner or view
detailed information from the EPG/ESG screen.
detailed information from the EPG/ESG screen.
a/b/c/d: Press to select a desired item on the screen or
adjust a selected item.
OK
:
Press to go to the next step or complete the
setting.
setting.
Press to open the Programme list when no
other menu screen is active. (Except external
input.)
other menu screen is active. (Except external
input.)
END
:
Press to exit the current menu screen without
saving the changes.
saving the changes.
Colour
:
Each of the coloured buttons have a unique
function assigned in the menu screen.
function assigned in the menu screen.
RETURN
:
Press to return to the previous step.
DTV menu operation buttons
Use the following buttons on the remote control unit to
operate the DTV Menu.
operate the DTV Menu.
DTV common operations
DTV common menu operation
Press DTV or
b to access the DTV mode.
Press DTV MENU and the DTV Menu screen
displays.
displays.
Press
c/d to select the desired menu, and
then press OK if necessary.
• From this point, menu operations differ depending on
the item you are going to adjust. See the respective
section of the menu operation.
section of the menu operation.
• You cannot select any DTV-related menu items
unless “Auto Installation” has been completed.
• Press RADIO to switch between DTV and Radio
mode.
• To exit the current screen without saving the change,
press END.
1
2
2
3
DTV MENU / Language
Select
OK
END
DTV MENU
1
3
4
6
5
2
7
LC-42XD1E_gb_c.indd 23
LC-42XD1E_gb_c.indd 23
2006/10/27 10:22:33
2006/10/27 10:22:33
24
DTV menu operations
About using the character set
screen
screen
In some cases you may be prompted to enter
characters. See below for details.
characters. See below for details.
Sample Alpha Numerical Character Set screen
Alpha Numerical Character Set
Select
FAV
!
~
#
$
%
&
‘
(
)
*
+
,
-
.
/
0
1
2
3
4
5
6
7
8
9
;
:
<
_
>
?
@
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
[
\
]
^
`
=
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
q
r
s
t
u
v
w
x
y
z
OK
END
0...9
1 Input
area
2 Space
To add or overwrite with a space.
3 Character select area
4 YELLOW
4 YELLOW
(Select)
button
Press to move between the input area and character
select
area.
5 a/b/c/d button
Press to move the cursor.
6 OK button
While in the input area:
Confi rms the new name.
Once
OK
is pressed to confi rm, a confi rmation
message displays.
Press
c/d to select “Yes”, and then press OK.
While in the character select area:
Confi rms the input of a character.
Sample operation using Alpha Numerical
Character Set
Character Set
Call up the character set screen while in the
“Label” or “Carrier Setup” screen. (Pages 26
and 27)
“Label” or “Carrier Setup” screen. (Pages 26
and 27)
Press YELLOW (Select) to move the cursor to
the character select area.
the character select area.
Press
a/b/c/d to select the desired
character, and then press OK. Repeat until the
new name is fully entered.
new name is fully entered.
• Use space to add a space or overwrite.
To register the new name, press YELLOW
(Select) to move the cursor back to the input
area.
(Select) to move the cursor back to the input
area.
Press OK.
• A confi rmation message displays.
Press
c/d to select “Yes”, and then press OK.
1
2
3
4
5
6
Programme Setup
Confi gure various settings for each service. Press the
preassigned
preassigned
-
numeric buttons to access each
of the functions explained below.
Press
OK while the cursor is on “Programme
Setup”.
Sample Programme Setup screen
Programme Setup
S.No Services
001
BBC
002
BBC News
003
BBC 1
004
BBC 2
Lock
Skip Erase Move
Fav
1
1. Fav
3.
3.
Move
5.
Skip
7.
Erase
9.
View
2.
Lock
4.
Move To
6.
Select
8.
Label
Select
0...9
OK
END
RADIO
DTV MENU
TV/Radio
Basque
Catalan
Croatian
Czech
Danish
Dutch
English*
Finnish
French
Gaelic*
Gallegan
German
Catalan
Croatian
Czech
Danish
Dutch
English*
Finnish
French
Gaelic*
Gallegan
German
Greek
Italian
Norwegian
Polish
Portuguese
Russian
Serbian
Slovak
Spanish
Swedish
Turkish
Welsh*
Italian
Norwegian
Polish
Portuguese
Russian
Serbian
Slovak
Spanish
Swedish
Turkish
Welsh*
Available language list
* Languages available for MHEG5 service
Language
Select language settings for audio (if a programme is
broadcast in more than one language) and MHEG5
service.
broadcast in more than one language) and MHEG5
service.
Press OK while the cursor is on “Language”.
Press
a/b to select “1st Pref. Audio”, “2nd
Pref. Audio”, “3rd Pref. Audio” or “MHEG”.
Select a desired language for each item.
NOTE
• See page 17 to change the language displayed on-screen.
• See page 32 to change the subtitle language.
• See page 32 for details on the MHEG5 service.
• See page 17 to change the language displayed on-screen.
• See page 32 to change the subtitle language.
• See page 32 for details on the MHEG5 service.
1
2
2
3
NOTE
• The picture window shows a blank image if Radio services
• The picture window shows a blank image if Radio services
are listed.
1
3
5
6
4
2
LC-42XD1E_gb_c.indd 24
LC-42XD1E_gb_c.indd 24
2006/10/27 10:22:37
2006/10/27 10:22:37
25
DTV menu operations
Favourite
Assign services to 4 different favourite groups.
Press
a/b to select the desired service.
Press
on the remote control. A selection box
displays.
Press
a/b to register the selected service to
any of the 4 favourite groups (None, Fav 1 ...
Fav 4) and then press OK. An icon displays
indicating the favourite status.
Fav 4) and then press OK. An icon displays
indicating the favourite status.
• Do not press END to exit the screen here if you wish
to register the change.
Press OK.
Now you can easily select your favourite service
from the Programme List. (Page 31)
from the Programme List. (Page 31)
NOTE
• You cannot register the same service to two different
• You cannot register the same service to two different
favourite groups.
Lock
When the service is locked, you must enter your PIN
whenever you tune to the service.
whenever you tune to the service.
Press
a/b to select the desired service.
Press
on the remote control.
If you have already set the PIN, enter it here. If
not, enter the factory preset PIN “1234”.
not, enter the factory preset PIN “1234”.
An icon displays indicating the service is locked.
• Pressing
will turn the lock icon on and off. (PIN
entry is required when lifting the lock icon.)
• Do not press END to exit the screen here if you wish
to register the change.
Press OK.
NOTE
• See page 17 for setting the PIN.
• See page 17 for setting the PIN.
Move
Sort the order of the selected service by moving the
service position.
service position.
Press
a/b to select the desired service.
Press
on the remote control. An icon
displays indicating the service to be moved.
• Pressing
will turn the move icon on and off.
Move the selected service to the desired
position using
position using
a/b, and then press OK.
• Do not press END to exit the screen here if you wish
to register the change.
Press OK to register the change.
EXAMPLE:
Moving “002 ZDF” ahead of “001 ARD”.
Default order: Press
a/b to select the desired service in
001
rs002rs003rs004.
Sorted order: Press
a/b to select the desired service in
002
rs001rs003rs004.
1
2
2
3
4
5
5
1
2
2
3
1
2
2
3
4
Move To
Use this function to change the position of two selected
services
services
Press
a/b to select the desired service.
Press
on the remote control.
Enter the number using
-
numeric
buttons, and then press OK. The positions of
the selected services are switched.
the selected services are switched.
• Do not press END to exit the screen here if you wish
to register the change.
• You cannot enter a service number that is not listed.
Press OK again, the message “Successfully
updated” displays. The change is now
registered.
updated” displays. The change is now
registered.
1
2
3
2
3
4
Skip
Services that are set to skip will not be picked up when
pressing P (
pressing P (
s/r).
Press
a/b to select the desired service.
Press
on the remote control. An icon
displays indicating the service to be skipped.
• Pressing
will turn the skip icon on and off.
• Do not press END to exit the screen here if you wish
to register the change.
Press OK.
NOTE
• To view services that are set to be skipped, use
• To view services that are set to be skipped, use
-
numeric buttons or select from the Programme List.
1
2
2
3
002
ZDF
001
ARD
003
SAT. 1
004
RTL
001
ARD
002
ZDF
003
SAT. 1
004
RTL
s
s
001
ZDF
002
ARD
003
SAT. 1
004
RTL
001
RTL
002
ARD
003
SAT. 1
004
ZDF
LC-42XD1E_gb_c.indd 25
LC-42XD1E_gb_c.indd 25
2006/10/27 10:22:38
2006/10/27 10:22:38
26
DTV menu operations
Installation
This section describes how to reconfi gure the DTV
settings after conducting Initial auto installation
(DTV)
settings after conducting Initial auto installation
(DTV)
on page 8.
Carrier Scan
Manually add a new carrier by entering the desired
carrier number or frequency band.
carrier number or frequency band.
Press
c/d to select “Installation”.
Press
a/b to select “Carrier Scan”, and then
press OK.
If you have already set the PIN, enter it here. If
not, enter the factory preset PIN “1234”.
not, enter the factory preset PIN “1234”.
1
2
2
Auto Installation
The TV automatically detects and stores all available
services in your area. See Initial auto installation
(DTV)
services in your area. See Initial auto installation
(DTV)
on page 8 for details.
NOTE
• If the TV detects a new carrier/service that has become
• If the TV detects a new carrier/service that has become
available after performing “Auto Installation”, the message
“Do you want to save?” displays.
“Do you want to save?” displays.
Press
c/d to select “Yes” or “No”, and then press OK.
Carrier Scan
Select
Ch-35
554000
Channel
Frequency (kHz)
0...9
OK
END
DTV MENU
Press
a/b to select “Channel”, then c/d to
enter the carrier number, and then press OK.
• The frequency of the selected carrier in the below cell
changes correspondingly.
After the scan is complete, the screen shows all
available services for the selected range.
available services for the selected range.
A confi rmation message displays. Press
c/d
to select “Yes”, and then press OK to save the
change.
change.
NOTE
• You can directly enter the frequency instead of step 3. In
• You can directly enter the frequency instead of step 3. In
this case, select “Frequency (kHz)”, enter the number using
-
numeric buttons, and then press OK. Use
c/d
to move between the digits.
• After performing “Carrier Scan”, the order stored by using
the “Move” function will revert to the default order.
• See page 17 for setting the PIN.
3
4
5
Select
Use this function to jump to the specifi c service in
one step. This is useful when there are many services
displayed on screen to scroll through.
one step. This is useful when there are many services
displayed on screen to scroll through.
Press
on the remote control. Now you can
change the service number on the left side of
the screen.
the screen.
Enter the number using
-
numeric
buttons, and then press OK. The highlight
moves to the selected service.
moves to the selected service.
Erase
Erase the selected service(s) from the memory.
Press
a/b to select the desired service.
Press
on the remote control. An icon
displays indicating the service to be erased.
• Pressing
will turn the erase icon on and off.
• Do not press END to exit the screen here if you wish
to register the change.
Press OK.
• A confi rmation message displays.
Press
c/d to select “Yes”, and then press OK.
Label
Change individual service names.
Press
a/b to select the desired service.
Press
on the remote control. A character set
screen displays.
Enter new name for the service. See page 24 for
operations using the character set screen.
operations using the character set screen.
View
Tune to the service shown in the picture window.
Press
a/b to select the desired service.
Press
on the remote control.
• The image shown in the picture window changes.
Press END to exit the Programme Setup screen
to view the image in full screen.
to view the image in full screen.
1
2
1
2
2
3
4
1
2
2
3
1
2
2
3
LC-42XD1E_gb_c.indd 26
LC-42XD1E_gb_c.indd 26
2006/10/27 10:22:41
2006/10/27 10:22:41
Click on the first or last page to see other LC-42XD1E (serv.man12) service manuals if exist.