Sharp LC-42XD1E (serv.man12) User Manual / Operation Manual ▷ View online
15
Menu operations
Connections menu
TV menu
HDMI setup
Supply voltage
AV-Link
Miscellaneous
Setup
Connections
Input select
Decoder
no (0V)
EXT 2
Decoder
Make sure to select the terminal (EXT 1 or 2) to which
the decoder is connected.
the decoder is connected.
NOTE
• This setting will be refl ected in the “Decoder stations”
• This setting will be refl ected in the “Decoder stations”
function under “Miscellaneous”. (Page 16)
Input select
For setting the signal type of external equipment.
NOTE
• If no (colour) image displays, try to change the other
• If no (colour) image displays, try to change the other
signal type.
• Check the operation manual of the external equipment for
the signal type.
• TV, DTV, EXT3, EXT5 and EXT6 are not displayed in Input
Select.
• If both CVBS and RGB signals are input to EXT 1 using
a SCART cable, the TV may output an RGB signal even
though you have designated CVBS for the respective
terminal. This happens due to the setting of your external
equipment.
though you have designated CVBS for the respective
terminal. This happens due to the setting of your external
equipment.
HDMI setup
HDMI (High-Defi nition Multimedia Interface) terminal
selection.
selection.
Press MENU and the TV menu screen displays.
Press
c/d to select “Connections”, and then
press OK.
Press
a/b to select “HDMI setup”, and then
press OK.
Press
a/b to select “EXT5” or “EXT6”, and
then press OK.
Press
a/b to select the desired item.
Press
c/d to select the desired setting.
1
2
2
3
4
5
6
6
NOTE
• Refer to your external equipment operation manual for the
• Refer to your external equipment operation manual for the
signal type.
• Items with * may be greyed out depending on the type of
signal input from the external equipment.
• Item marked ** is only available when EXT5 is selected.
Selectable
items
Description
RGB/YCbCr
4:4:4/YCbCr 4:2:2
4:4:4/YCbCr 4:2:2
ITU601/ITU709
Normal/
Enhanced
Enhanced
Enable/Disable
Digital/Analogue
Signal type*
Colour
matrix*
matrix*
Dynamic
range*
range*
Auto view
Audio
select**
select**
Select the video signal type
from the HDMI terminal.
from the HDMI terminal.
Select the internal colour
space conversion method
when an RGB signal is
input.
space conversion method
when an RGB signal is
input.
Select the signal amplitude
range. Usually, select
“Normal”.
range. Usually, select
“Normal”.
Set whether or not to use
Wide mode based on
signal recognition, including
an HDMI signal.
Wide mode based on
signal recognition, including
an HDMI signal.
Select “Digital” for audio
signal via the HDMI
terminal. Select “Analogue”
for audio signal via the
AUDIO jack.
signal via the HDMI
terminal. Select “Analogue”
for audio signal via the
AUDIO jack.
HDMI setup
items
Input source
EXT 1
EXT 2
EXT 4
Signal type
Y/C, CVBS, RGB
Y/C, CVBS
PC (RGB), COMPONENT
LC-42XD1E_gb_b.indd 15
LC-42XD1E_gb_b.indd 15
2006/10/27 10:22:06
2006/10/27 10:22:06
16
Supply voltage
Antennas with an integrated amplifi er need a supply
voltage on the antenna line. (Page 4)
voltage on the antenna line. (Page 4)
AV-Link (EXT 2 only)
With this function you can transfer the station data of
the TV (such as station preset number/name/channel/
frequency) to the recorder if the recorder is set up for
AV-Link. This function is available only for conventional
analogue stations.
the TV (such as station preset number/name/channel/
frequency) to the recorder if the recorder is set up for
AV-Link. This function is available only for conventional
analogue stations.
Press MENU and the menu screen displays.
Press
c/d to select “Connections”, and then
press OK.
Press
a/b to select “AV-Link”, and then press
OK.
Select “Start transmission”, and then press OK.
• The TV transfers the station list to the AV-Link
recorders connected to EXT 2.
Miscellaneous
E
Decoder stations
Encrypted stations should be labelled as decoder
stations, so that they can be decoded automatically by
the connected decoder.
stations, so that they can be decoded automatically by
the connected decoder.
1
2
2
3
4
Menu operations
E
Manual adjustment of AV standard
Ask your dealer which standard to select for specifi c
AV equipment (if it is not recognised automatically).
Select the appropriate external terminal (EXT 1- 3) and
its AV standard as advised.
AV equipment (if it is not recognised automatically).
Select the appropriate external terminal (EXT 1- 3) and
its AV standard as advised.
E
Allow switching voltage
If this function is activated and you switch to an AV
device (connected to EXT 1 or 2) that delivers switching
voltage to playback, its picture and sound will be
reproduced immediately at all TV presets. (This function
is available only for analogue TV and DTV mode.)
device (connected to EXT 1 or 2) that delivers switching
voltage to playback, its picture and sound will be
reproduced immediately at all TV presets. (This function
is available only for analogue TV and DTV mode.)
Setup menu
You can search for stations automatically or manually
as well as set the menu language, time and date, child
lock, on-screen displays, etc.
as well as set the menu language, time and date, child
lock, on-screen displays, etc.
Channels
The menu contains the automatic station search and
the manual station settings. You can re-sort stations,
enter and change station names, and delete stations.
the manual station settings. You can re-sort stations,
enter and change station names, and delete stations.
E
Search wizard
Use this menu to search for stations automatically once
certain settings have been made. (See page 8, Initial
auto installation (Analogue)
certain settings have been made. (See page 8, Initial
auto installation (Analogue)
for details.)
Press MENU and the TV menu screen displays.
Press
c/d to select “Setup”, and then press
OK.
Press
a/b to select “Channels”, and then
press OK.
Press
a/b to select “Search wizard”, and then
press OK.
• You will get a table for the auto station search.
If necessary select “Change search settings”,
and then press OK. Otherwise skip to step 8.
and then press OK. Otherwise skip to step 8.
Press
a/b/c/d to select your country or area
listed on the screen, and then press OK.
Indicate whether you wish to have “all” stations
or “new ones only” searched for using
or “new ones only” searched for using
c/d,
and then press OK.
Select the desired TV/colour standard, and then
press OK.
press OK.
Specify from which station position onwards the
stations are to be stored, and then press OK.
stations are to be stored, and then press OK.
Press
a/b to select “Start search”, and then
press OK.
NOTE
• The station search may take some time.
• Do not make any entries or switch off the set during this
• The station search may take some time.
• Do not make any entries or switch off the set during this
time.
• When the search has ended you will be shown the found
and stored stations sorted in numerical order.
• After the station search has been completed, close the
table by pressing END.
1
2
2
3
4
5
6
7
8
TV menu
Child lock
Auto format
Language
Factory settings
Miscellaneous
on
Geometry
Channels
Setup
Items
Select decoder
station(s)
station(s)
Sound encoding
Description
Press OK to mark an encoded station. The
marking can be removed from a station that
has already been marked by pressing the same
key.
marking can be removed from a station that
has already been marked by pressing the same
key.
For reception of encoded audio signals select
either “always” if these are always encoded or
“Automatic” if these are sometimes encoded.
For audio signals which are always uncoded,
select “never”.
either “always” if these are always encoded or
“Automatic” if these are sometimes encoded.
For audio signals which are always uncoded,
select “never”.
LC-42XD1E_gb_b.indd 16
LC-42XD1E_gb_b.indd 16
2006/10/27 10:22:07
2006/10/27 10:22:07
17
Menu operations
E
Manual tune
Use the manual tune option when receiving TV signal
whose TV/Colour standard deviate from the one
specifi ed already. However, this requires detailed
knowledge.
whose TV/Colour standard deviate from the one
specifi ed already. However, this requires detailed
knowledge.
Press MENU and the TV menu screen displays.
Press
c/d to select “Setup”, and then press
OK.
Press
a/b to select “Channels”, and then
press OK.
Press
a/b to select “Manual tune”, and then
press OK.
Now enter the necessary setting parameters for
each menu item.
each menu item.
• For “Channel” and “Frequency”, you can initiate the
search by pressing Blue (Search) or simply enter the
number if you know it.
number if you know it.
• For items “TV stand.” and “Col. standard”, you must
fi rst press OK (Adopt) to confi rm the change.
When you have fi nished the adjustments, press
Red (Store) to store the new settings.
Red (Store) to store the new settings.
Next, select the channel position to store the
new settings. Press Red to overwrite the current
station or Blue to insert the new channel.
new settings. Press Red to overwrite the current
station or Blue to insert the new channel.
1
2
2
3
4
5
6
7
Channel
: You can enter the channel number directly here.
Press
c/d to move between the receiving channel
modes.
Frequency
: You enter the frequency directly using the
numeric buttons. For fi ne tuning, use the
c/d buttons.
Fine tuning may be necessary for analogue channels or
for recorder playback via the antenna connection.
for recorder playback via the antenna connection.
Name
: You can enter an 8-character channel name. Refer
to page 9 for the character input method.
TV stand.
: Ask your dealer which standard to select for
specifi c channels or AV equipment. (B/G, I, L, D/K)
Col. standard
: Ask your dealer which standard to select
for specifi c channels or AV equipment. Selectable colour
standard varies depending on the selected TV standard.
(Auto, PAL, SECAM)
standard varies depending on the selected TV standard.
(Auto, PAL, SECAM)
Item
E
Change stations
You can move stations, enter or change station names,
and delete stations. The operation is the same as
explained in page 9, “To delete, move, and rename
stations from the station list”
and delete stations. The operation is the same as
explained in page 9, “To delete, move, and rename
stations from the station list”
.
Child lock
With the child lock you can bar access to all stations
immediately or daily for a certain time period.
To use this function, you have fi rst to defi ne your PIN.
immediately or daily for a certain time period.
To use this function, you have fi rst to defi ne your PIN.
NOTE
• To view a locked channel, you must enter the PIN. (See
• To view a locked channel, you must enter the PIN. (See
page 28 for locking channels from viewing in DTV mode.)
• The TV power will be turned off if no PIN is entered for
several seconds.
E
Lock immediately
You can lock out all stations immediately by selecting
“yes”. The lock is effective immediately and effective
whenever you turn on the TV.
“yes”. The lock is effective immediately and effective
whenever you turn on the TV.
E
Lock
daily
Here, enter the daily time period, for which your TV set
is to be locked.
is to be locked.
E
Change
PIN
This allows you to change your PIN.
NOTE
•
•
When in analogue TV mode, the current PIN becomes
invalid if you choose “no” for both “Lock immediately” and
“Lock daily”.
invalid if you choose “no” for both “Lock immediately” and
“Lock daily”.
• As a precautionary measure, make a note of your PIN
on the back of this operation manual, cut it out and
keep it in a safe place that children cannot reach.
keep it in a safe place that children cannot reach.
• See page 33 if you lose or forget your PIN.
Auto format
When Auto format is switched on, the TV recognises
the wide picture mode for Cinemascope or widescreen
fi lms and adjusts itself accordingly.
the wide picture mode for Cinemascope or widescreen
fi lms and adjusts itself accordingly.
NOTE
• Use Wide modes if an image does not switch to the desired
• Use Wide modes if an image does not switch to the desired
screen format.
• When 4:3 picture format (i.e., “Normal”) is manually
selected using the Wide modes function, the Auto format
function is temporarily disabled. Select another input
source or reset the TV power to restore the Auto format
function, and the 4:3 picture format will be automatically
selected depending on the transmitted signal.
function is temporarily disabled. Select another input
source or reset the TV power to restore the Auto format
function, and the 4:3 picture format will be automatically
selected depending on the transmitted signal.
Language
You can select a language from the Setup menu. Select
from among 13 languages. (Dutch, English, Finnish,
French, German, Greek, Italian, Polish, Portuguese,
Russian, Spanish, Swedish, Turkish)
from among 13 languages. (Dutch, English, Finnish,
French, German, Greek, Italian, Polish, Portuguese,
Russian, Spanish, Swedish, Turkish)
Factory settings
Call up the predefi ned sound and picture factory
settings. Unlike the “Reset” options provided in the
Picture and Sound menus, this will reset all parameters
to the default value all across the various input modes
and AV mode options.
settings. Unlike the “Reset” options provided in the
Picture and Sound menus, this will reset all parameters
to the default value all across the various input modes
and AV mode options.
LC-42XD1E_gb_b.indd 17
LC-42XD1E_gb_b.indd 17
2006/10/27 10:22:08
2006/10/27 10:22:08
18
Miscellaneous
E
No signal off
When set to “Enable” the TV will automatically enter the
standby mode if there is no signal input for 6 minutes.
standby mode if there is no signal input for 6 minutes.
Menu operations
TV menu ->Setup
Time and date
Miscellaneous
Channels
Child lock
On-screen displays
No signal off
Enable
Disable
Geometry menu
You can set the geometry values of the picture such as
picture position and phase relation. The adjustments
are stored independently for each input mode.
picture position and phase relation. The adjustments
are stored independently for each input mode.
Picture
TV menu
Picture horizontal
Picture vertical
Phase position
0
0
0
Geometry
Picture horizontal
Sets the horizontal picture position by moving the
picture left and right.
picture left and right.
Picture vertical
Sets the vertical picture position by moving the picture
up and down.
up and down.
Phase position
Adjusting the phase relation ensures a picture without
fl icker and noise. (Available only for RGB signal)
fl icker and noise. (Available only for RGB signal)
PC only
NOTE
• When a TV programme fi nishes, this function may not
• When a TV programme fi nishes, this function may not
operate.
• This function is not available in DTV mode.
E
On-screen displays
Here you can determine which on-screen displays are
to be shown by pressing
to be shown by pressing
p on the remote control.
E
Time and date
When you receive teletext, the correct date and time
setting is picked up automatically by the set.
If you do not receive teletext, you should set the “Date”
and “Time” manually. Also you have additional items
you can adjust as outlined below.
setting is picked up automatically by the set.
If you do not receive teletext, you should set the “Date”
and “Time” manually. Also you have additional items
you can adjust as outlined below.
NOTE
• Time and date information confi gured manually cannot be
• Time and date information confi gured manually cannot be
overridden automatically by the set.
• If the power to the set is cut off (disconnection of AC
cord, power outage, etc.), the auto time acquisition mode
through teletext reactivates.
through teletext reactivates.
Items
On-screen display
time
time
Sound mode
Time
Description
Sets the duration of the TV status and station
name display.
• This setting also affects other TV screens.
name display.
• This setting also affects other TV screens.
(Volume, Surround, etc.)
Sound mode display on/off (“yes”/“no”)
Time information display on/off (“yes”/“no”)
Items
Time
Date
Beginning of
daylight-saving
time
daylight-saving
time
End of daylight-
saving time
saving time
Description
If you receive a station with teletext after
switching on your TV set, the time and date are
automatically registered. In the case of some
stations, the date may have to be entered
manually. For stations without teletext, enter the
time (00:00 to 23:59) and the date (day.month.
year) using the numeric buttons on the remote
control.
switching on your TV set, the time and date are
automatically registered. In the case of some
stations, the date may have to be entered
manually. For stations without teletext, enter the
time (00:00 to 23:59) and the date (day.month.
year) using the numeric buttons on the remote
control.
See the above item “Time”.
Enter the date for the beginning of daylight-
saving time if it deviates from the date
calculated automatically.
saving time if it deviates from the date
calculated automatically.
Enter the date of the end of daylight-saving
time if it deviates from the date calculated
automatically.
time if it deviates from the date calculated
automatically.
LC-42XD1E_gb_b.indd 18
LC-42XD1E_gb_b.indd 18
2006/10/27 10:22:08
2006/10/27 10:22:08
Click on the first or last page to see other LC-42XD1E (serv.man12) service manuals if exist.