DOWNLOAD Sharp LC-39LE351K (serv.man3) Service Manual ↓ Size: 7.13 MB | Pages: 43 in PDF or view online for FREE

English   - 16 -

For your viewing requirements, you can set the related mode option. Picture mode can be 

set to one of these options: 

Cinema,Game,Dynamic and Natural. 

Sets the lightness and darkness values of the screen.

Sets the brightness value for the screen.

Sets the sharpness value for the objects displayed on the screen.

Sets the colour value, adjusting the colors.

Power Save Mode  To set Power Save Mode as Eco, Picture Off and Disabled. See the section, “Environmental 

Information” in this manual for further information on Power Save Mode. 

This setting controls the backlight level and it can be set to 

Auto, Maximum, Minimum and 

Eco Mode. Backlight function will be inactive if Power Save Mode is set to On. Backlight 

If the broadcast signal is weak and the picture is noisy, use 

Noise Reduction setting 

to reduce the noise amount. Noise Reduction can be set to one of these options: 

Low, 

Medium, High or Off.

Dynamic Contrast You can change contrast rate by using dynamic contrast function. Dynamic contrast can be set 

to one of these options: 

Low, Medium, High or Off.

Sets the desired colour tone.

Sets the picture size to Auto,16:9, Subtitle,14:9, 14:9 Zoom, 4:3 or Cinema.

While watching from HDMI source, this feature will be visible in the Picture Settings menu. 

You can use this feature to enhance blackness in the picture. 

Films are recorded at a different number of frames per second to normal television programmes. 

Turn this feature on when you are watching films to see the fast motion scenes clearly.

Adjust the desired skin tone.

Adjust the desired colour tone.

Press 

OK button to edit RGB gain. You can configure the colour temperature values using 

the RGB Gain feature.

Resets the picture settings to factory default settings.

Automatically optimizes the display. Press 

OK to optimize.

This item shifts the image horizontally to right hand side or left hand side of the screen.

This item shifts the image vertically towards the top or bottom of the screen.

Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive 

presentations like spreadsheets or paragraphs or text in smaller fonts.

Depending on the resolution and scan frequency that you input to the TV set, you may see 

a hazy or noisy picture on the screen. In such a case you can use this item to get a clear 

picture by trial and error method.

English   - 17 -

Adjusts volume level.

Equalizer:

In equalizer menu, the preset can be changed to 

Music, Movie, Speech, Flat, 

Classic and User. Press the MENU button to return to the previous menu. 

This setting is used for emphasizing left or right speaker balance.

Sets headphone volume. 

You can select Mono, Stereo, Dual I or Dual II mode, only if the selected channel 

supports that mode.

Automatic Volume Limiting (AVL) function sets the sound to obtain fixed output 

level between programmes (For instance, volume level of advertisements tend 

to be louder than programmes).

When you connect an external amplifier to your TV using the headphone jack, 

you can select this option as Lineout. If you have connected headphones to the 

TV, set this option as Headphone.

Enables or disables the Dynamic Bass.

Surround sound mode can be changed as On or Off.

Sets digital out audio type.

Displays automatic tuning options. 

Manual Channel Scan This feature can be used for direct broadcast entry.

Network Channel Scan Searches for the linked channels in the broadcast system. 

You can use this setting for fine tuning analogue channels. This feature is not 

available if no analogue channels are stored.

Deletes all stored channels and settings, resets TV to factory settings and starts 

first time installation. You can follow the instructions in the Initial Installation section 

for more information on this process. 

(*) This setting is visible only when the Country option is set to Denmark, Sweden, 

Norway or Finland. Use this setting to clear channels stored. 

English   - 18 -

Controls conditional access modules when available. 

Configures language settings.

Configures parental settings.
Default PIN code can change depending on the selected country.
If you are asked to enter a PIN code for viewing a menu option, use one of the following 

codes: 4725, 0000 or 1234.

Sets timers for selected programmes.

Displays recording configuration menu.

Sets date and time.

Enables or disables selected source options.

Displays satellite settings. 

Displays network settings.

Changes timeout duration for menu screens.

When this setting is on, search process will locate the encrypted channels as well. If it is 

set as 

Off, encrypted channels will not be located in automatic search or manual search.

Activates or deactivates blue background system when the signal is weak or absent.

To ensure that your TV always has the most update information, you can use this setting. In 

order for the proper operation, please ensure that the TV is set to standby mode.

Displays application version.

If the broadcaster enables any special signal concerning the audio, you can set this setting 

as On to receive such signals. 

Audio description refers to an additional narration track for blind and visually impaired 

viewers of visual media, including television and movies. You can use this feature, only if 

the broadcaster supports that additional narration track.

You can set the

 timeout value of auto off feature.After the timeout value is reached and the 

Tv is not operated for selected time , the TV will go off. 

If you change Standby Search to Off, this function will be unavailable. To use Standby search 

please make sure that you select Standby Search as On. If the Standby Search is set to On, 

when the TV is in standby mode, available broadcasts will be searched. If the TV locates any 

new or missing broadcasts, a menu screen will be displayed, asking you whether or not to 

execute these changes. Channel list will be updated and changed after this process. Please 

activate Standby Search setting in order to enable your TV for automatically updating the 

broadcast frequency of the broadcaster, broadcast definition and similar changes. 

If you are displaying the TV in a store, you can activate this mode. While Store Mode is 

enabled, some items in the TV menu may not be available to be set. 

DLNA renderer feature allows you to share files stored on your smartphone. If you have a DLNA 

renderer compatible smartphone and software installed, you can share/play photos with your 

TV. See instructions of your sharing software for more information. 

This setting configures the power up mode preference. Always On: The TV always switches on 

when main on/off button is pressed. / Standby: The TV always powers up in Standby mode. / 

Last State: The TV always switches on with the last selected channel/source.

Enables or disables the virtual remote feature.  

English   - 19 -

Some, but not all channels send information about 

the current and next programmes. Press the  
“

” button to view the EPG menu.

Up/Down/Left/Right: Navigate EPG.
OK: Displays programme options.
INFO: Displays, in detail information on programme 

selected.
GREEN: Switches to List Schedule EPG.
YELLOW: Switches to Timeline Schedule EPG.
BLUE: displays filtering options. 

 (RECORD): the TV will start to record the 

selected progamme. You can press again to stop 

the recording.

In EPG menu, press the 

OK button to enter the Event 

Options menu.
Select Channel
In EPG menu, using this option, you can switch to the 

selected channel.
Record / Delete Record Timer
After you have selected a programme in EPG menu, 

press the 

OK button and and Options screen will be 

displayed. Select “

Record” option and press the OK 

button. After this operation, a recording becomes set 

to the selected programme. 
To cancel an already set recording, highlight that 

programme and press the 

OK button and select the 

option “

Delete Rec. Timer”. The recording will be 

cancelled.

Set Timer / Delete Timer
After you have selected a programme in EPG menu, 

press the 

OK button and and Options screen will 

be displayed. Select “

Set Timer on Event” option 

and press 

OK button. You can set a timer for future 

programmes. To cancel an already set timer, highlight 

that programme and press the 

OK button. Then select 

“

Delete Timer” option. The timer will be cancelled.

To record a programme, you should first connect a 

USB disk to your TV while the TV is switched off. 

You should then switch on the TV to enable recording 

feature.
For using recording function, you should connect a 

USB disk or an external hard disk drive to the TV 

and connected USB disk should have at least 1 GB 

capacity and should have 2.0 speed compatibility. 

If the connected USB device does not support 2.0 

speed, an error message will be displayed.

Radio record is not supported

. The TV can record 

programmes up to ten hours.
Recorded programmes are split into 4GB partitions. 
If the writing speed of the connected USB disk is not 

sufficient, recording may fail and timeshifting feaute 

may not be available.
Recordings of HD programmes can occupy bigger 

size on the USB disk depending on the broadcast’s 

resolution. For this reason it is recommended 

to use USB hard disk drives for recording HD 

programmes.
Do not plug out the USB/HDD during the recording. 

This may harm the connected USB/HDD.
Multipartiton support is available. Maximum two 

different partitions are supported. If the disk have more 

than two partitions, crash may occur.  First partition 

of the usb disk is used for PVR ready features. It also 

must be formatted as primary partition to be used for 

PVR ready features.
Some stream packets may not be recorded  because 

of signal problems, so sometimes video may freezes 

during playback.