DOWNLOAD Sharp LC-39LE351K (serv.man3) Service Manual ↓ Size: 7.13 MB | Pages: 43 in PDF or view online for FREE

Model
LC-39LE351K (serv.man3)
Pages
43
Size
7.13 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
TV / LCD / (October 2013 Revision)
File
lc-39le351k-sm3.pdf
Date

Sharp LC-39LE351K (serv.man3) User Manual / Operation Manual ▷ View online

English   - 8 -
Viewing the TV 
LC-39LE351K                     LC-32LE351K
 
 
TV Control button & Operation
LC-39LE351K / LC-32LE351K
+
P/
C
H
+
TV
/A
V
1.  Standby button
2.  TV/AV button
3.  Programme Up/Down buttons
4.  Volume Up/Down buttons
   
, switch is used for turning the TV on or off.
English   - 9 -
Viewing remote control - TV
TV
1.  Standby / On
2.  Channel list
3.  Volume up-down
4.  Menu on/off
5.  OK / Confirm
6.  Return / Back
7.  Internet Portal
8.  My button 1 / Youtube (*)
9.  My button 2 (**)
10. Coloured buttons (Red, Green, Yellow, Blue)
11.  Mono-Stereo Dual I-II / Current language
12. Fast rewind (in media browser mode)
13. Pause (in media browser mode) / Timeshift 
recording
14. Programme recording
15. Play (in media browser mode)
16. Stop (in media browser mode)
17. Fast forward (in media browser mode)
18. Subtitle on-off / Subtitle (in media browser 
mode)
19. Image size
20. Teletext - Mix
21. Media Browser
22. Electronic programme guide
23. Exit
24. Navigation buttons
25. Quick menu On-Off
26. Info / Reveal (in TXT mode)
27. Programme up/down
28. Mute
29. Previous programme / Now (in EPG mode)
30. Numeric buttons
31. AV / Source
NOTE: The Remote Control range is approximately 7m 
/ 23ft.
Using My button 1 (*)
This button’s main function is to run Youtube link. 
However, if you want to change this function, you can 
press MY BUTTON 1  for five seconds when on a desired 
source, channel or link, until the  “MY BUTTON IS SET” 
message is displayed on the  screen. This confirms 
that the selected MY BUTTON  is now associated with 
the selected function. Note that if you perform first time 
installation, MY BUTTON 1 will return to its default 
function.
Using My Button 2 (**)
Press MY BUTTON 2  for five seconds when on a 
desired source, channel or link, until the  “MY BUTTON 
IS SET” message is displayed on the screen. This 
confirms that the selected MY BUTTON is now 
associated with the selected function.
English   - 10 -
Viewing the Connections
NOTE: When connecting a device via the Side AV input, you must use the supplied connection cables to enable connection. 
See the illustrations above. | YPbPr can be used only when you connect a device that has a YPbPr output through the PC 
input with YPbPr to PC cable (YPbPr to PC cable is not supplied). When the connection is made, switch to YPbPr source. 
To enable PC audio, you will need to use PC/YPBPR AUDIO CONNECTION WHITE & RED inputs. | If an external device 
is connected via the SCART socket, the TV will automatically switch to AV mode.| When receiving DTV channels (Mpeg4 
H.264) or while in Media Browser mode, output will not be available via the scart socket. | When using the wall mounting 
kit (optional), we recommend that you plug all your cables into the back of the TV before mounting on the wall. | Insert or 
remove the CI module only when the TV is SWITCHED OFF. You should refer to the module instruction manual for details of 
the settings. Insert the CAM and then the viewing card to the slot that is located in the terminal cover at the rear side of the 
TV. The module should be correctly inserted, it is impossible to insert fully if reversed. The CAM or the TV terminal may be 
damaged if the CAM is forcefully inserted. 
Connector
Type
Cables
Device
Scart
Connection
(back)
VGA
Connection
(back)
SIDE AV 
SIDE 
A
V
MODE
o
5Vdc 
Max:500mA
PC/YPbPr 
Audio
Connection
(side)
Side Audio/Video 
Connection Cable  
(Supplied)
  
PC Audio Cable 
(Not supplied)
HDMI
Connection
(back)
SPDIFF
Connection
(back)
SIDE AV
SIDE 
A
V
MODE
o
5Vdc 
Max:500mA
Side AV
Connection
(side)
AV Connection Cable 
(supplied)
HEADPHONE
SIDE 
A
V
MODE
o
5Vdc 
Max:500mA
Headphone
Connection
(side)
USB
Connection
(side)
CI
Connection
(side)
CAM 
module
English   - 11 -
Using a Conditional Access Module
 IMPORTANT: Insert or remove the CI module only when 
the TV is SWITCHED OFF.
In order to watch certain digital channels, a conditional 
access module (CAM) can be necessary. This module 
must be inserted in the CI slot of your TV.
1. Obtain the Conditional Access Module (CAM) and the 
viewing card by subscribing to a pay channel company, 
then insert those to the TV using the following procedure.
2. Insert the CAM and then the viewing card to the 
slot that is located in the terminal cover at the rear 
side of the TV.
3. The CAM should be correctly inserted, it is 
impossible to insert fully if reversed. The CAM or 
the TV terminal may be damaged if the CAM is 
forcefully inserted.
4. Connect the TV to the mains supply, switch on 
and then wait for few moments until the card is 
activated.
5. When no module is inserted, “No Common 
Interface module detected” message appears 
on the screen.
You can refer to the module instruction manual for details 
of the settings.
CAM 
module
Standby Notifications
If the TV does not receive any input signal (e.g. From 
an aerial or HDMI source) for 5 minutes, the TV will 
go into standby. When you next switch-on the TV, the 
following message will be displayed:
 
When the Auto Tv Off timeout is reached, the following 
message will be displayed on the screen. Select YES 
to shut down the TV. Select NO to cancel. The TV 
will switch off as well, if you do not make a selection 
on this screen.
If the TV has been left on and not been operated for 
4 hours, the TV will go into standby. When you next 
switch-on, the following message will be displayed:
Page of 43
Display

Click on the first or last page to see other LC-39LE351K (serv.man3) service manuals if exist.