Sharp LC-37AD1E (serv.man34) User Manual / Operation Manual ▷ View online
27
Basic adjustment settings (Analogue)
Auto installation
You can run auto installation again, even after setting
up the preset channels.
up the preset channels.
Press MENU and the MENU screen displays.
1
2
5
3
–
–
–
–
Press c/d to select “Setup”.
MENU
[Setup ... Auto Installation]
Setup
Option
Child Lock
Auto Installation
Programme Setup
Position
WSS
4:3 Mode
[Panorama]
[On]
[English]
[Normal]
Language
Rotate
6
Press c/d to select “Yes”, and then press
OK.
OK.
No
Yes
You can set language and country the same
as in the initial auto installation. Follow steps
1 and 2 on page 14. After this setting, auto
search starts with the following order.
as in the initial auto installation. Follow steps
1 and 2 on page 14. After this setting, auto
search starts with the following order.
1 Programme auto search
2 Auto labelling
3 Auto sorting
4 Preset download
2 Auto labelling
3 Auto sorting
4 Preset download
You do not need to do anything during the
auto search.
auto search.
Press a/b to select “Auto Installation”, and
then press OK.
then press OK.
4
If you already set the PIN, enter it here. If
not, enter the factory preset PIN “1234”.
not, enter the factory preset PIN “1234”.
• See page 83 for setting PIN.
LC-37AD1E(E)-c
03.11.28, 8:19 AM
27
28
Basic adjustment settings (Analogue)
Programme setup
You can run the auto installation procedure again at
any time, by accessing the Setup menu, then
Programme Setup. Channels can be tuned
automatically or manually.
any time, by accessing the Setup menu, then
Programme Setup. Channels can be tuned
automatically or manually.
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
1
2
3
4
Press a/b to select “Programme Setup”,
and then press OK.
If you already set the PIN, enter it here. If
not, enter the factory preset PIN “1234”.
and then press OK.
If you already set the PIN, enter it here. If
not, enter the factory preset PIN “1234”.
• See page 83 for setting PIN.
NOTE
• See page 15 for details.
MENU
[Setup ... Programme Setup]
Setup
Option
Child Lock
Auto Installation
Programme Setup
Position
WSS
4:3 Mode
[Panorama]
[On]
[English]
[Normal]
Language
Rotate
Auto Search
Manual Adjust
Sort
Yes
No
5
Press c/d to select “Yes”, and then press
OK.
OK.
• Auto search starts with the following order.
1 Programme auto search
2 Auto labelling
3 Auto sorting
4 Preset download
2 Auto labelling
3 Auto sorting
4 Preset download
Auto search
You can also automatically search and download TV
channels by performing the procedure below. This is
the same function as from programme auto search to
preset download in auto installation on page 27.
channels by performing the procedure below. This is
the same function as from programme auto search to
preset download in auto installation on page 27.
Press a/b to select “Auto Search”, and then
press OK.
press OK.
LC-37AD1E(E)-c
03.11.28, 8:19 AM
28
29
Basic adjustment settings (Analogue)
Press a/b to select “Manual Adjust”, and
then press OK.
then press OK.
4
Next
01 SAT.1
02 PR07
03 KABEL
Programme Setup “Manual” menu
NOTE
• When you exit Programme Setup “Manual” menu, preset
download automatically runs if you change information
on that menu.
on that menu.
Press MENU and the MENU screen displays.
Press c/d to select “Setup”.
1
2
3
MENU
[Setup ... Programme Setup]
Setup
Option
Child Lock
Auto Installation
Programme Setup
Position
WSS
4:3 Mode
[Panorama]
[On]
[English]
[Normal]
Language
Rotate
Auto Search
Manual Adjust
Sort
Yes
No
5
Press c/d to select “Yes”, and then press
OK.
OK.
You can select one of the following settings.
1
Fine (See page 30.)
2
Colour system (See page 31.)
3
Sound system (See page 31.)
4
Label (See page 31.)
5
Skip (See page 32.)
6
Decoder (See page 32.)
7
Lock (See page 32.)
Manual setting for each channel
You can set some channel items manually. They are
Fine (TV frequency), Colour sys., Sound sys., Label
(Network name), Skip, Decoder and Lock (Child Lock).
Fine (TV frequency), Colour sys., Sound sys., Label
(Network name), Skip, Decoder and Lock (Child Lock).
Press a/b to select “Programme Setup”,
and then press OK.
If you already set the PIN, enter it here. If
not, enter the factory preset PIN “1234”.
and then press OK.
If you already set the PIN, enter it here. If
not, enter the factory preset PIN “1234”.
• See page 83 for setting PIN.
LC-37AD1E(E)-c
03.11.28, 8:19 AM
29
30
Basic adjustment settings (Analogue)
3
Press a/b/c/d to select the channel you
want to edit, and then press OK.
want to edit, and then press OK.
• The selected channel information displays.
Press a/b to select “Fine”, and then press
OK.
OK.
Press c/d to adjust the frequency, and then
press OK.
press OK.
• Adjust while checking the background picture
as a reference.
1
2
MENU
[Setup ... Programme Setup ... Manual Adjust]
Fine
Colour sys.
Sound sys.
Label
Skip
Decoder
Lock
[179.25]
[AUTO]
[B/G]
[Off]
[SAT.1]
[Off]
[Off]
179.25
a
• 179.25 MHz: Press 1 s 7 s 9 s 2 s 5 s OK.
• 49.25 MHz: Press 4 s 9 s 2 s 5 s OK.
• 179.25 MHz: Press 1 s 7 s 9 s 2 s 5 s OK.
• 49.25 MHz: Press 4 s 9 s 2 s 5 s OK.
• Instead of the above, you can also set by
directly entering the frequency number of the
channel with 0 – 9.
channel with 0 – 9.
Manual setting for each channel (continued)
Fine tuning
LC-37AD1E(E)-c
03.11.28, 8:20 AM
30
Click on the first or last page to see other LC-37AD1E (serv.man34) service manuals if exist.