Sharp LC-32WD1E (serv.man2) User Manual / Operation Manual ▷ View online
19
Menu operations (main)
Menu Operation: C (page 12)
This setting is the same as the Colour Standard setting in
Installation, except for audiovisual input sources. For
information on this setting, see page 17.
This setting is the same as the Colour Standard setting in
Installation, except for audiovisual input sources. For
information on this setting, see page 17.
Menu Operation: C (page 12)
The HDMI Setup setting allows you to set the colour space
conversion method for HDMI RBG inputs. Available options
are ITU601, ITU709, and AUTO.
NOTE:
The HDMI Setup setting allows you to set the colour space
conversion method for HDMI RBG inputs. Available options
are ITU601, ITU709, and AUTO.
NOTE:
•
This option is only available when EXT6 or EXT7
is selected and an active HDMI source is present.
is selected and an active HDMI source is present.
Colour Standard
HDMI Setup
AV only
AV only
Page 19 of 204 June 8, 2007
TINS-DO52WJN1
SHPRN000205B-GLDN
20
You can select the picture size to match the type of signal
received.
Image Sizes for Standard Signals
received.
Image Sizes for Standard Signals
NOTE:
•
For HDMI input, the wide mode is set to Full and
cannot be changed.
cannot be changed.
Manual Selection
1
1
Press .
•
The Wide Mode menu displays.
2
Press
again to scroll through the available options.
•
Each option is immediately reflected on the
screen. There is no need to press OK.
screen. There is no need to press OK.
Auto Selection
If you want, you can set the following settings to allow the
TV to automatically select the wide mode setting using
information received from the input source.
TV to automatically select the wide mode setting using
information received from the input source.
•
Set WSS to “On”. Refer to “WSS (Wide Screen
Signalling)” on page 18.
Signalling)” on page 18.
You can select the picture size to match your preferences.
Image Sizes for PC Input Signals
Image Sizes for PC Input Signals
NOTE:
•
Connect the PC before making any adjustments.
•
Selectable picture sizes may vary with the input
signal type.
signal type.
•
For best picture quality, set your PC to 1360x768
or 1280x768 format and then select Dot-by-Dot
in this setting.
or 1280x768 format and then select Dot-by-Dot
in this setting.
Manual Selection
1
1
Press .
•
The Wide Mode menu displays.
2
Press
again to scroll through the available options.
•
Each option is immediately reflected on the
screen. There is no need to press OK.
screen. There is no need to press OK.
You can freeze a picture on the screen.
1
Press
to freeze an image on the screen.
2
Press
again to un-freeze the image.
What is Teletext?
Teletext broadcasts pages of information and
entertainment to specially equipped television sets. Your
TV receives teletext signals broadcast by a TV network,
and decodes them into graphical format for viewing. News,
weather and sports information, stock exchange prices and
programme previews are among the many services
available.
entertainment to specially equipped television sets. Your
TV receives teletext signals broadcast by a TV network,
and decodes them into graphical format for viewing. News,
weather and sports information, stock exchange prices and
programme previews are among the many services
available.
Useful features
Wide Mode
Normal
Displays the picture with a 4:3 aspect
ratio. Bars appear on both sides of the
image.
ratio. Bars appear on both sides of the
image.
Zoom 14:9
For 14:9 letterbox pictures. A thin side
bar appears on each side, and you
may see bars on the top and bottom
with some programmes.
bar appears on each side, and you
may see bars on the top and bottom
with some programmes.
Panorama
In this mode the picture is
progressively stretched toward each
side of the screen.
progressively stretched toward each
side of the screen.
Full
For 16:9 squeeze pictures.
Cinema 14:9
For 14:9 letterbox pictures. Bars may
appear on the top and bottom with
some programmes.
appear on the top and bottom with
some programmes.
Cinema 16:9
For 16:9 letterbox pictures. Bars may
appear on the top and bottom with
some programmes.
appear on the top and bottom with
some programmes.
Auto Format
Automatically selects the most
appropriate wide mode for the input.
appropriate wide mode for the input.
TV/AV only
Wide Mode
Normal
The input picture is displayed using the
full height of the screen, while
maintaining the original aspect ratio of
the picture.
full height of the screen, while
maintaining the original aspect ratio of
the picture.
Dot-by-Dot
The input picture is displayed without
any scaling, matching each picture
pixel with a display pixel.
any scaling, matching each picture
pixel with a display pixel.
Full
Stretches the picture to fill the screen.
This may distort the picture slightly.
This may distort the picture slightly.
Freezing Images
Using Teletext
PC only
Page 20 of 204 June 8, 2007
TINS-DO52WJN1
SHPRN000205B-GLDN
21
Useful features
Turning on and off Teletext
1
1
Select a TV channel or external input source providing
the teletext programme.
the teletext programme.
2
Press
to display the teletext.
3
Press
again to change the format of the teletext.
•
Each time you press
, the screen changes
format as shown below.
•
If you select a programme with no teletext signal,
a warning displays.
a warning displays.
Time display
You can display the time information on the screen
included in the DTV and teletext broadcasts.
included in the DTV and teletext broadcasts.
1
Select a TV channel that provides teletext information.
(The teletext broadcast must include time information.
The time information is automatically captured.)
The time information is automatically captured.)
2
Press
.
NOTE:
•
The time display cannot be stored once the power
is turned off. When you turn on the power, perform
steps 1 to 2 again.
is turned off. When you turn on the power, perform
steps 1 to 2 again.
Button functions
TELETEXT
TELETEXT
TELETEXT
Buttons
Description
P (
)
Move to the next or previous page.
Colour (Red/
Green/Yellow/
Blue)
Green/Yellow/
Blue)
Select a group or block of pages
displayed in the coloured brackets at
the bottom of the screen by pressing
the corresponding Colour (Red/
Green/Yellow/Blue) on the remote
control.
displayed in the coloured brackets at
the bottom of the screen by pressing
the corresponding Colour (Red/
Green/Yellow/Blue) on the remote
control.
0-9
Directly select any page from 100 to
899 by using 0-9.
899 by using 0-9.
(Reveal
Hidden
Teletext)
Hidden
Teletext)
Reveal or hide hidden information
such as an answer to a quiz.
such as an answer to a quiz.
(Freeze/hold)
Stop updating teletext pages
automatically or release the hold
mode.
automatically or release the hold
mode.
(Subtitle for
Teletext)
Teletext)
Display the subtitle or exit the subtitle
screen.
screen.
• Subtitles will not be displayed if
the service does not contain the
subtitle information.
subtitle information.
(Subpage)
Reveal or hide subpages.
• The S button is used to navigate
to the previous (available) sub-
page.
page.
• The T button is used to navigate
to the next (available) subpage.
Page 21 of 204 June 8, 2007
TINS-DO52WJN1
SHPRN000205B-GLDN
22
To enter and operate the digital TV on-screen display
menus, use the following buttons on the remote control.
menus, use the following buttons on the remote control.
The DTV on-screen display menus operate in a similar
manner to the main on-screen display menus (except the
exact colouring differs slightly). (See page 11.)
manner to the main on-screen display menus (except the
exact colouring differs slightly). (See page 11.)
1
Press DTV to access DTV mode.
2
Press DTV MENU to open the DTV on-screen display
menus.
menus.
3
Press S/T to select the desired menu, and then press
OK.
•
OK.
•
Press S/T/W/X and OK to move through the on-
screen display menus and modify settings. Some
menu operations differ depending on the item you
are going to adjust. See the specific instructions in
this section for more information.
screen display menus and modify settings. Some
menu operations differ depending on the item you
are going to adjust. See the specific instructions in
this section for more information.
The Timer setting allows you to set the TV to automatically
tune to a digital TV-event when its on-air time begins.
Use this feature to automatically output audio and video
through the SCART connection for recording purposes.
tune to a digital TV-event when its on-air time begins.
Use this feature to automatically output audio and video
through the SCART connection for recording purposes.
1
Press DTV MENU.
2
Press S/T to select Timer, and then press OK.
•
The currently programmed TV-event timers are
displayed.
displayed.
3
Press the coloured button to complete the desired
task.
•
task.
•
YELLOW — Delete or cancel the selected timer.
Press S/T to select the desired timer and then
press the Yellow button to delete it. Press
GREEN to confirm.
Press S/T to select the desired timer and then
press the Yellow button to delete it. Press
GREEN to confirm.
•
GREEN — Add a new timer. See “New Timer”.
•
BLUE— Edit a timer. Press S/T to select the
desired timer and then press the BLUE button to
edit it. See “New Timer” step 3.
desired timer and then press the BLUE button to
edit it. See “New Timer” step 3.
DTV menu operations
Press to display the subtitle selection screen.
Press to display teletext or the MHEG5
presentation, if available. If both are available,
press for MHEG5. Press for 1-2 seconds for
teletext.
presentation, if available. If both are available,
press for MHEG5. Press for 1-2 seconds for
teletext.
0–9
Press for direct channel entry.
DTV
Switches between analogue TV mode and
digital TV mode.
digital TV mode.
EPG
Press to open the EPG (Electronic
Programme Guide) screen.
Programme Guide) screen.
ESG
Press to open the ESG (Electronic Service
Guide) screen.
Guide) screen.
RADIO
Press to switch between TV and RADIO.
Press to open the multi audio screen.
Press to open the multi audio screen.
DTV
MENU
MENU
Press to open or close the DTV Main Menu
screen.
Press to open the service banner or view
detailed information from the EPG/ESG
screen.
screen.
Press to open the service banner or view
detailed information from the EPG/ESG
screen.
S/T/W/X Press to move through the on-screen display
menu, select an item on the screen, or adjust
an item.
an item.
OK
Press to select or execute a highlighted item.
Press to access the programme list.
Press to access the programme list.
END
Press to exit the on-screen display menus.
Colour
Each of the coloured buttons have a unique
function assigned in the menu screen.
function assigned in the menu screen.
RETURN Press to return to the previous menu.
Using the on-screen display
Common Operations
Timer
Page 22 of 204 June 8, 2007
TINS-DO52WJN1
SHPRN000205B-GLDN
Click on the first or last page to see other LC-32WD1E (serv.man2) service manuals if exist.