Sharp LC-32WD1E (serv.man2) User Manual / Operation Manual ▷ View online
15
Menu operations (main)
Menu Operation: B (page 12)
Adjust the sound quality to your preference with the Bass,
Treble, and Balance settings.
Adjust the sound quality to your preference with the Bass,
Treble, and Balance settings.
Menu Operation: A (page 12)
: This setting provides SRS TruSurround
technology. TruSurround delivers a compelling, virtual
surround sound experience through the television’s two
stereo speakers. You will feel as if you are surrounded by
additional “phantom” speakers placed all around the room,
producing a distinctly immersive surround sound field
without the clutter of extra speakers.
NOTE:
surround sound experience through the television’s two
stereo speakers. You will feel as if you are surrounded by
additional “phantom” speakers placed all around the room,
producing a distinctly immersive surround sound field
without the clutter of extra speakers.
NOTE:
•
You can also choose this setting by pressing
TruSurround on the remote control.
TruSurround on the remote control.
•
If set to “On”, this will automatically turn the Auto
Volume setting “Off”.
Volume setting “Off”.
Menu Operation: A (page 12)
Sometimes different sound sources do not have the same
volume level. (For example, the change in volume between
a TV show and advertisements.) The Auto Volume setting
equalizes the volume levels.
NOTE:
Sometimes different sound sources do not have the same
volume level. (For example, the change in volume between
a TV show and advertisements.) The Auto Volume setting
equalizes the volume levels.
NOTE:
•
If set to “On”, this will automatically turn the SRS
TruSurround setting “Off”.
TruSurround setting “Off”.
Menu Operation: A (page 12)
The Reset setting resets all Picture and Sound menu
settings to the factory default.
The Reset setting resets all Picture and Sound menu
settings to the factory default.
Menu Operation: A (page 12)
The No Signal Off setting automatically switches the TV
into standby mode if there is no signal input or user
interaction for 15 minutes.
NOTE:
The No Signal Off setting automatically switches the TV
into standby mode if there is no signal input or user
interaction for 15 minutes.
NOTE:
•
A warning is given, starting five minutes before
the TV enters standby mode.
the TV enters standby mode.
Menu Operation: A (page 12)
The No Operation Off setting automatically switches the
TV into standby mode if there is no user interaction for
three hours.
NOTE:
The No Operation Off setting automatically switches the
TV into standby mode if there is no user interaction for
three hours.
NOTE:
•
A warning is given, starting five minutes before
the TV enters standby mode.
the TV enters standby mode.
Menu Operation: A (page 12)
The Power Management setting automatically switches
the TV into standby mode if there is no signal input for eight
minutes.
NOTE:
The Power Management setting automatically switches
the TV into standby mode if there is no signal input for eight
minutes.
NOTE:
•
A warning is given, starting 60 seconds before the
TV enters standby mode.
TV enters standby mode.
•
This setting is only applicable to EXT5
connections.
connections.
General Audio Adjustments
Option
W Button
X Button
Bass
For less loud
lower pitches
lower pitches
For louder lower
pitches
pitches
Treble
For less loud
higher pitches
higher pitches
For louder
higher pitches
higher pitches
Balance
Less audio from
the right
speaker
the right
speaker
Less audio from
the left speaker
the left speaker
SRS TruSurround
Auto Volume
Reset
TV/DTV/AV only
Power Control Menu
No Signal Off
No Operation Off
Power Management
PC only
Page 15 of 204 June 8, 2007
TINS-DO52WJN1
SHPRN000205B-GLDN
16
Menu operations (main)
Menu Operation: A (page 12)
The Language setting selects the on-screen display
language. Refer to “Specifications” on page 31 for a list of
available languages.
The Language setting selects the on-screen display
language. Refer to “Specifications” on page 31 for a list of
available languages.
Menu Operation: A (page 12)
The Country setting selects the country or region. It
specifies settings specific to your country or region, such
as the frequency list when doing auto channel scans.
The Country setting selects the country or region. It
specifies settings specific to your country or region, such
as the frequency list when doing auto channel scans.
The Installation setting allows you to setup the analogue
TV channels manually.
TV channels manually.
1
Press
to select the TV input source.
2
Press MENU. The TV Menu screen displays.
3
Press S/T to select the Setup menu, and then press
OK.
OK.
4
Press S/T to select Installation, and then press OK.
If you have a PIN set in Child Lock, enter it now using
0–9. See page 17 for information.
0–9. See page 17 for information.
5
Press S/T to select the desired setting option and
then press S/T/W/X and OK to select the desired
setting.
then press S/T/W/X and OK to select the desired
setting.
Programme Selection
The Programme Selection setting selects the channel
that you want to modify. Enter the desired channel using
W/X.
that you want to modify. Enter the desired channel using
W/X.
Programme Name
The Programme Name setting allows you to change
channel names to a personalized name.
Use S/T/W/X to enter each letter of the new name, and
then press OK.
NOTE:
channel names to a personalized name.
Use S/T/W/X to enter each letter of the new name, and
then press OK.
NOTE:
•
The channel name can be six characters or less.
Tuner Frequency
The Tuner Frequency setting allows you to specify the
exact frequency for the channel. Enter the desired
frequency using W/X or 0–9.
NOTE:
exact frequency for the channel. Enter the desired
frequency using W/X or 0–9.
NOTE:
•
Adjust while checking the background picture as a
reference.
reference.
Example:
•
179.25 MHz: Press 1 J 7 J 9 J 2 J 5
•
49.25 MHz: Press 0 J 4 J 9 J 2 J 5
Skip
With the Skip setting set to “On”, when scrolling through
channels, this channel will not be displayed.
channels, this channel will not be displayed.
Child Locked
The Child Locked setting blocks this channel by means of
a password PIN.
NOTE:
a password PIN.
NOTE:
•
For information on Child Lock, see page 17.
Automatic Installation
The Automatic Installation setting searches for all
available analogue channels.
available analogue channels.
1
Press S/T to select this setting, and then press OK.
2
The auto search begins.
The TV performs a frequency scan to detect the TV
channels available on the network. During the
frequency scan, a TV channel with ACI (Automatic
Channel Installation) information may be detected.
ACI information is teletext-based information from the
channel source that describes the TV channels
(including channel labels and channel numbers)
available on the network.
channels available on the network. During the
frequency scan, a TV channel with ACI (Automatic
Channel Installation) information may be detected.
ACI information is teletext-based information from the
channel source that describes the TV channels
(including channel labels and channel numbers)
available on the network.
3
If ACI information is detected, the ACI information will
be displayed on the screen. Press S/T to select the
correct region and then press MENU.
be displayed on the screen. Press S/T to select the
correct region and then press MENU.
4
The Auto Installation will end and you are ready to
watch TV.
watch TV.
NOTE:
•
Press END to exit at any time.
Setup Menu
Language
Country
Installation
TV only
TV only
Page 16 of 204 June 8, 2007
TINS-DO52WJN1
SHPRN000205B-GLDN
17
Menu operations (main)
Colour Standard
The Colour Standard setting selects the colour system to
receive. See “Specifications” on page 31 for a list of the
available colour systems.
NOTE:
receive. See “Specifications” on page 31 for a list of the
available colour systems.
NOTE:
•
If AUTO is selected, the colour system is
automatically set. If an image does not display
clearly, select a different colour system.
automatically set. If an image does not display
clearly, select a different colour system.
•
Depending on the input, not all colour systems are
available.
available.
Sound Standard
The Sound Standard setting selects the sound system to
receive. See “Specifications” on page 31 for a list of the
available sound standards.
NOTE:
receive. See “Specifications” on page 31 for a list of the
available sound standards.
NOTE:
•
Depending on the input, not all sound standards
are available.
are available.
Decoder
The Decoder setting informs the TV that you are using a
decoder as part of your audiovisual equipment. See
“Connecting a decoder” on page 10.
decoder as part of your audiovisual equipment. See
“Connecting a decoder” on page 10.
The Overview Menu allows you to delete channels and
change the channel order.
change the channel order.
1
Press
to select the TV input source.
2
Press MENU. The TV Menu screen displays.
3
Press S/T to select Setup Menu, and then press OK.
4
Press S/T to select Overview, and then press OK.
If you have a PIN set in Child Lock, enter it now using
0–9. See page 17 for information.
The Overview Menu displays.
0–9. See page 17 for information.
The Overview Menu displays.
5
Press S/T/W/X to select the channel.
•
To delete the channel, press RED. Press RED to
confirm.
confirm.
•
To change the channel order:
a.
Press GREEN to select the channel.
b.
Press S/T/W/X to go to the desired
new position.
new position.
c.
Press GREEN again to place the
channel in the new position.
channel in the new position.
Menu Operation: C (page 12)
The Child Lock setting blocks children from accessing
specified channels and some on-screen display menus.
If you try to access blocked content when Child Lock is set
to “On”, the PIN input menu displays. Entering the correct
PIN lifts the child lock temporarily until the TV enters
standby mode. Enter the PIN using 0–9.
The Child Lock setting blocks children from accessing
specified channels and some on-screen display menus.
If you try to access blocked content when Child Lock is set
to “On”, the PIN input menu displays. Entering the correct
PIN lifts the child lock temporarily until the TV enters
standby mode. Enter the PIN using 0–9.
•
If you have already set this feature to “On”, you
must enter your PIN to access this menu.
must enter your PIN to access this menu.
1
Press MENU. The TV Menu screen displays.
2
Press S/T to select the Setup menu, and then press
OK.
OK.
3
Press S/T to select Child Lock, and then press OK.
4
Press S/T to select Active, and then press W/X to
set the setting to on or off.
set the setting to on or off.
5
Press S/T to select PIN, and then enter a 4-digit PIN
using 0–9.
using 0–9.
NOTE:
•
This setting activates the Child Lock feature and
sets a PIN. To block a channel, you must specify
which channels to block. See page 16.
sets a PIN. To block a channel, you must specify
which channels to block. See page 16.
•
This setting only applies to the analogue TV
channels and menus. To block DTV channels and
menus, see “Child Lock” on page 25.
channels and menus. To block DTV channels and
menus, see “Child Lock” on page 25.
•
See page 29 for information on resetting the PIN
to the factory preset “1234”.
to the factory preset “1234”.
•
To change the PIN, enter a new PIN in this menu.
To activate the PIN, select Active, and change
the setting to “Off” and then “On” again.
To activate the PIN, select Active, and change
the setting to “Off” and then “On” again.
Menu Operation: C (page 12)
The Fine Sync setting allows you to manually adjust the
image on the TV.
The Fine Sync setting allows you to manually adjust the
image on the TV.
NOTE:
•
Similar adjustments are available on your
computer.
computer.
Overview Menu
TV only
Child Lock
Fine Sync
V-Pos.
Moves the image up or down.
H-Pos.
Moves the image left or right.
Clock
Adjusts the screen if the image flickers
with vertical stripes.
with vertical stripes.
Phase
Automatically adjusts the screen if text
has low contrast or if the image
flickers.
has low contrast or if the image
flickers.
Reset
Resets the settings to the factory
default.
default.
TV only
PC only
Page 17 of 204 June 8, 2007
TINS-DO52WJN1
SHPRN000205B-GLDN
18
Menu operations (main)
The Input Label setting allows you to customize the label
that is displayed for each input source.
that is displayed for each input source.
1
Press
to select the input source whose label you
want to change.
2
With the input source selected, press MENU. The TV
Menu displays.
Menu displays.
3
Press S/T to select Setup Menu, and then press OK.
4
Press S/T to select Input Label, and then press OK.
5
Use S/T/W/X to enter each letter of the new name,
and then press OK.
and then press OK.
NOTE:
•
The name can be six characters or less.
•
You cannot change the label if the input source is
TV or DTV.
TV or DTV.
Menu Operation: C (page 12)
The Position setting adjusts the horizontal and vertical
position of the image on the screen.
The Position setting adjusts the horizontal and vertical
position of the image on the screen.
Menu Operation: A (page 12)
If the incoming broadcast contains wide screen signals, the
WSS setting allows the TV to automatically switch to the
appropriate screen format.
NOTE:
If the incoming broadcast contains wide screen signals, the
WSS setting allows the TV to automatically switch to the
appropriate screen format.
NOTE:
•
To adjust the wide screen format manually, see
“Wide Mode” on page 20.
“Wide Mode” on page 20.
Menu Operation: A (page 12)
The Antenna Supply Voltage setting turns power “On” or
“Off” to the antenna input connection on the rear of the
television. (See page 3.)
The Antenna Supply Voltage setting turns power “On” or
“Off” to the antenna input connection on the rear of the
television. (See page 3.)
Menu Operation: C (page 12)
The Clock Menu setting allows you to set a 12-hour or 24-
hour clock and set the time manually.
The Clock Menu setting allows you to set a 12-hour or 24-
hour clock and set the time manually.
•
Press S/T to select 12/24 Hours Selection.
Press W/X to set this setting to 12 Hours or 24
Hours.
Press W/X to set this setting to 12 Hours or 24
Hours.
•
Press S/T to select Set Time. Press 0–9 to enter
the current time.
the current time.
NOTE:
•
If teletext information is available, the TV will
automatically synchronize with the time included
with the teletext information.
automatically synchronize with the time included
with the teletext information.
Menu Operation: A (page 12)
The TV will automatically detect the type of input for EXT1,
EXT2, or EXT3. However, this can be set manually if
desired. (For example if the image is unclear.)
The TV will automatically detect the type of input for EXT1,
EXT2, or EXT3. However, this can be set manually if
desired. (For example if the image is unclear.)
Menu Operation: A (page 12)
The Audio Only setting turns off video and only plays the
audio from the source.
The Audio Only setting turns off video and only plays the
audio from the source.
Menu Operation: C (page 12)
The DNR setting (Digital Noise Reduction) produces a
clearer image by reducing digital noise. Available options
are High, Low, and Off.
The DNR setting (Digital Noise Reduction) produces a
clearer image by reducing digital noise. Available options
are High, Low, and Off.
Input Label
Position
V-Pos.
Moves the image up or down.
H-Pos.
Moves the image left or right.
Reset
Resets the settings to the factory
default.
default.
WSS (Wide Screen
Signalling)
Signalling)
Antenna Supply Voltage
TV/DTV/AV only
TV/DTV/AV only
Clock Menu
Option Menu
Input Select
EXT 1, EXT 2
Y/C (S-Video), RGB, CVBS
EXT 3
Y/C (S-Video), CVBS
Audio Only
DNR (Digital Noise
Reduction)
Reduction)
TV/DTV/AV only
Page 18 of 204 June 8, 2007
TINS-DO52WJN1
SHPRN000205B-GLDN
Click on the first or last page to see other LC-32WD1E (serv.man2) service manuals if exist.