Sharp LC-32LD135K (serv.man2) Service Manual ▷ View online
25
LC-32LD135
10
• Benefits
– EQ: Speaker Equalization Improves Audio Performance
– DRC: Dynamic Range Compression. Can Be Used As Power Limiter. Enables
Speaker Protection, Easy Listening, Night-Mode Listening
– DirectPath Technology: Eliminates Bulky DC Blocking Capacitors
– Stereo Headphone/Stereo Line Drivers: Adjust Gain via External Resistors, Dedicated
Active Headpone Mute Pin, High Signal-to-Noise Ratio
– Two-Band DRC: Set Two Different Thresholds for Low- and High-Frequency
Content
c. Pin descriptions and functions:
Figure 2: Pin description
26
LC-32LD135
11
Table 2: Pin functions
27
LC-32LD135
12
Table 3: Recomnended operating conditions
B. MAIN AMPLIFIER (TS4962M)(2.5 W option)
a. General Description
The TS4962M is a differential Class-D BTL power amplifier. It is able to drive up to 2.3W
into a 4Ω load and 1.4W into a 8Ω load at 5V. It achieves outstanding efficiency (88%typ.)
compared to classical Class-AB audio amps. The gain of the device can be controlled via two
external gain-setting resistors. Pop & click reduction circuitry provides low on/off switch
noise while allowing the device to start within 5ms. A standby function (active low) allows
the reduction of current consumption to 10nA typ.
compared to classical Class-AB audio amps. The gain of the device can be controlled via two
external gain-setting resistors. Pop & click reduction circuitry provides low on/off switch
noise while allowing the device to start within 5ms. A standby function (active low) allows
the reduction of current consumption to 10nA typ.
b. Features
- Operating from VCC = 2.4V to 5.5V
- Standby mode active low
- Output power: 3W into 4Ω and 1.75W into 8Ω
- with 10% THD+N max and 5V power supply.
- Output power: 2.3W @5V or 0.75W @ 3.0V
- into 4Ω with 1% THD+N max.
- Output power: 1.4W @5V or 0.45W @ 3.0V
- into 8Ω with 1% THD+N max.
- Adjustable gain via external resistors
- Low current consumption 2mA @ 3V
- Efficiency: 88% typ.
- Signal to noise ratio: 85dB typ.
- PSRR: 63dB typ. @217Hz with 6dB gain
- PWM base frequency: 250kHz
- Low pop & click noise
- Thermal shutdown protection
- Available in flip-chip 9 x 300μm (Pb-free)
13
c. Pin descriptions and functions:
Figure 3: Pin description
c. Pin descriptions and funtions:
13
c. Pin descriptions and functions:
Figure 3: Pin description
28
LC-32LD135
14
Table 4: Recommended operating conditions
C. HEADPHONE AMPLIFIER STAGE
Headphone is a SoC (single on chip) configuration in mainboard, design scheme is shown
in figure 4.
Figure 4: Headphone
Click on the first or last page to see other LC-32LD135K (serv.man2) service manuals if exist.