Sharp LC-32FH500 (serv.man23) User Manual / Operation Manual ▷ View online
Quick guide
1
2
3
Initial installation overview
Follow the steps below one by one when using the TV for the first time. Some steps may not be necessary
depending on your TV installation and connection.
depending on your TV installation and connection.
Connect an antenna cable to
the antenna terminal (Page 8).
the antenna terminal (Page 8).
If necessary, insert a CA card
into the CI slot to watch
scrambled broadcasts
into the CI slot to watch
scrambled broadcasts
(Page 8.)
Connect the AC cord to the TV
(Page 8).
(Page 8).
Product shape varies in some countries.
Turn on the power using
a on
the TV (Page 10).
Run the initial auto installation
(Page 9).
(Page 9).
Language and country
setting
setting
TV Location setting
Congratulations!
Now you can watch TV.
Now you can watch TV.
If necessary, adjust the
antenna to attain maximum
signal reception (Page 9).
antenna to attain maximum
signal reception (Page 9).
7
Preparation
Power on and
run the auto
installation
Watch TV
Connect
external devices
Connect external
devices such as a
DVD player/recorder
as instructed (Pages
14 and 15).
devices such as a
DVD player/recorder
as instructed (Pages
14 and 15).
Connect external
audio devices such as
speakers/amplifier as
instructed (Pages 14
and 15).
audio devices such as
speakers/amplifier as
instructed (Pages 14
and 15).
Start searching
channels
Home
Store
Quick guide
Before turning on the power
In order to receive coded digital stations, a Common
Interface Module (CI Module) and a CA Card must be
inserted in the CI slot of the TV.
The CI Module and the CA Card are not supplied
accessories. They are usually available from your
dealers.
Interface Module (CI Module) and a CA Card must be
inserted in the CI slot of the TV.
The CI Module and the CA Card are not supplied
accessories. They are usually available from your
dealers.
Inserting the CA Card into the CI Module
1
With the side with the gold coloured contact
chip facing the side of the CI Module marked
with the provider’s logo, push the CA Card
into the CI Module as far as it will go. Note the
direction of the arrow printed on the CA Card.
chip facing the side of the CI Module marked
with the provider’s logo, push the CA Card
into the CI Module as far as it will go. Note the
direction of the arrow printed on the CA Card.
Inserting the CI Module in the CI slot
2
Carefully insert the CI
Module in the CI slot
with the contact side
forward. The logo on
the CI Module must be
facing outward from the
rear of the TV. Do not use
excessive force. Make
sure the module is not
bent in the process.
Module in the CI slot
with the contact side
forward. The logo on
the CI Module must be
facing outward from the
rear of the TV. Do not use
excessive force. Make
sure the module is not
bent in the process.
Checking CI Module information
NOTE
• Make sure that the CI Module is properly inserted.
• This menu is only available for digital stations.
• This menu is only available for digital stations.
1
Press MENU and the “PICTURE” menu is
shown.
shown.
2
Press
c/d to select “CHANNEL” menu.
• The content of this menu depends on the provider of
the CI Module.
3
Press
a/b to select “CI information”, and then
press OK.
●
●
Module
General information on CI Module displays.
●
●
Menu
Adjustment parameters of each CA Card displays.
●
●
Enquiry
You can input numerical values such as passwords
here.
here.
NOTE
The content of each screen depends on the provider of
the CI Module.
the CI Module.
Inserting a CA Card
8
1
Carefully insert the CI
Module in the CI slot
with the contact side
forward.
Module in the CI slot
with the contact side
forward.
2
The logo on the CI
Module must be
facing outward from
the rear of the TV.
Module must be
facing outward from
the rear of the TV.
AC cord
Place the TV close to the
AC outlet, and keep the
power plug within reach.
AC outlet, and keep the
power plug within reach.
Standard
DIN45325 plug
(IEC 169-2) 75
DIN45325 plug
(IEC 169-2) 75
q
coaxial cable.
Product shape varies in some countries.
Initial auto installation
When the TV is powered on for the first time after purchase,
the initial auto installation wizard appears. Follow the menus
and make the necessary settings one after another.
the initial auto installation wizard appears. Follow the menus
and make the necessary settings one after another.
1 Press a on the TV.
• The initial auto installation wizard appears.
2 Setting the OSD language.
Press
a/b/c/d
to select the desired language.
3 Setting the country.
Press
▲/▼/◄/► to select your country or area.
• This setting screen only appears during the first
installation.
4 Starting channel search.
Press
▲/▼ to select “Channel tuning” and then
press OK.
• If you want to search for more broadcasts,
execute “DTV (or ATV) manual tuning” from the
menu “CHANNEL” (Page 18).
menu “CHANNEL” (Page 18).
• To watch both analogue broadcasts and digital
broadcasts, you should perform the channel
search setting “DTV+ATV”.
search setting “DTV+ATV”.
Quick guide
5 Selecting the TV location.
Press
◄/► to select where you will use this TV, and
then press OK.
•HOME: For home.
•STORE: DYNAMIC mode is predetermined. If the
“Picture Mode” is changed, the TV will automatically
switch back to “DYNAMIC” when there is no signal input
from the TV or remote control unit for 30 minutes.
•STORE: DYNAMIC mode is predetermined. If the
“Picture Mode” is changed, the TV will automatically
switch back to “DYNAMIC” when there is no signal input
from the TV or remote control unit for 30 minutes.
If you have chosen “STORE” by mistake, go to “OPTION”
→ “Restore Factory Default” → OK, and the TV returns
to the initial screen.
→ “Restore Factory Default” → OK, and the TV returns
to the initial screen.
6 The TV searches for, sorts and stores all the
receivable TV stations according to their settings
and the connected antenna.
and the connected antenna.
•
To cancel the initial auto installation in progress, press
END
.
NOTE
•
If you turn the power on the TV after performing step 4,
initial auto installation wizard does not appear. The auto
installation function allows you to execute the installation
again from the “CHANNEL” menu (Page 18).
initial auto installation wizard does not appear. The auto
installation function allows you to execute the installation
again from the “CHANNEL” menu (Page 18).
•
The initial auto installation wizard will turn off if your leave
the TV unattended for 30 minutes before searching for
channels in step 4.
the TV unattended for 30 minutes before searching for
channels in step 4.
•
After initial Auto Tuning is completed, the default PIN is
automatically set to “1234”. To change the PIN setting,
refer to “LOCK” menu on page 19.
automatically set to “1234”. To change the PIN setting,
refer to “LOCK” menu on page 19.
If you install a DVB-T antenna for the first time of relocate
it, you should adjust the alignment of the antenna to
receive a good reception while checking the antenna
setup screen.
1 Press a channel you want to check.
2 Press MENU. “PICTURE” menu will appear.
3 Press ◄/► to select “CHANNEL” menu.
4 Press ▲/▼ to select “Signal Information” and
it, you should adjust the alignment of the antenna to
receive a good reception while checking the antenna
setup screen.
1 Press a channel you want to check.
2 Press MENU. “PICTURE” menu will appear.
3 Press ◄/► to select “CHANNEL” menu.
4 Press ▲/▼ to select “Signal Information” and
then press OK.
5 Position and align the antenna so that the maximum
possible values for “Quality” and “Strength” are
obtained.
obtained.
NOTE
The values of “Quality” and “Signal Strength” indicate when to
check the appropriate alignment of the antenna.
check the appropriate alignment of the antenna.
Checking quality and
signal strength
Home
Store
9
Confirm the following before turning
on the power
on the power
E Is the antenna cable connected?
E Is the AC cord plugged in?
Watching TV
Selecting language audio
E
DTV mode:
Pressing 2 appear a menu with languages or
audio sources availables depending on the received
broadcast.
audio sources availables depending on the received
broadcast.
Press
a/b to select the language and press OK.
NOTE
• The audio mode screen disappears in three seconds.
• Selectable items vary depending on the received
• Selectable items vary depending on the received
broadcasts.
E
ATV mode:
Each time you press 2, the mode switches as
shown in the following tables.
shown in the following tables.
NICAM TV broadcasts selection
Signal
Selectable items
Stereo
NICAM STEREO, MONO
Bilingual
NICAM CH A, NICAM CH B, NICAM CH AB, MONO
Monaural
NICAM MONO, MONO
A2 TV broadcasts selection
Signal
Selectable items
Stereo
STEREO, MONO
Bilingual
CH A, CH B, CH AB
Monaural
MONO
NOTE
• When no signal is received, the audio mode will display
“MONO”.
E
DTV mode:
Press SUBTITLES [ button to
access “Subtitles Languages”.
E
ATV mode:
The available subtitles according to
the broadcasting will be enabled or disabled by
pressing the Subtitle key
pressing the Subtitle key
[
.
E
Press
“DTV” to change between ATV and
DTV mode.
Daily operation
Switching on/off
Turning on/off the power
Press a on the TV to switch it on.
Switch it off by pressing a on the TV.
Switch it off by pressing a on the TV.
Standby mode
E
Switching to standby mode
If the TV is switched on (GREEN LED), you can switch
it to standby by pressing B on the remote control
unit.
it to standby by pressing B on the remote control
unit.
E
Switching on from standby
From standby (RED LED), press B on the remote
control unit.
control unit.
TV indicator status
B indicator
Status
Off
Power off
Green
Power on
Red
Standby
NOTE
• If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
• A small amount of electric power is still consumed even
when a is turned off.
Switching between analogue and
digital broadcasts
digital broadcasts
Changing channels
With 0–9:
With Pr/s:
Selecting an external video source
Once the connection is made,
press b to display the
“INPUT SOURCE” screen,
and then press
press b to display the
“INPUT SOURCE” screen,
and then press
a/b to
switch over to the appropriate
external source with OK.
external source with OK.
Switching subtitle languages
10
NOTE
• When turning off the power using
a on the TV, EPG data will be lost.
• The terminal layout may differ
depending on the model.
Click on the first or last page to see other LC-32FH500 (serv.man23) service manuals if exist.