Sharp LC-32FH500 (serv.man23) User Manual / Operation Manual ▷ View online
Connecting external devices
NOTE
• In cases when the decoder needs to receive a signal from
the TV, make sure to select the appropriate input terminal to
which the decoder is connected in “Input Source” (Page 10).
which the decoder is connected in “Input Source” (Page 10).
SCART connection
Example of connectable devices
● VCR ● Decoder (only SCART 1)
● DVD player/recorder
HDMI (DVI) Connection
ø 3,5 mm stereo mini jack cable
HDMI 1 or 2
HDMI-certified cable
DVI/HDMI Cable
PC connection through HDMI (DVI)
LC-37DH77E_ES.indd 16
2008/12/16 13:50:06
SCART 1
(AV / RGB)
Speaker/amplifier connector
Connect an amplifier with external speakers as shown
below.
below.
Resolution
Horizontal
Frequency
Vertical
Frequency
VGA
640
g 480
31,5 kHz
60 Hz
VGA
720
g 400
31,47 kHz
70 Hz
SVGA
800
g 600
37,9 kHz
60 Hz
XGA
1.024
g 768
48,4 kHz
60 Hz
WXGA
1.360
g 768
47,7 kHz
60 Hz
SXGA
1.280
g 1.024
64,0 kHz
60 Hz
SXGA+
1.400
g 1.050
65,3 kHz
60 Hz
UXGA
1.600
g 1.200
75,0 kHz
60 Hz
1080p
1.920
g 1.080
67,5 kHz
60 Hz
PC compatibility chart
NOTE
• This TV has only limited PC compatibility, correct operation
can only be guaranteed if the video card conforms exactly
to the VESA 60 Hz standard. Any variations from this
standard will result in picture distortions.
to the VESA 60 Hz standard. Any variations from this
standard will result in picture distortions.
VGA, SVGA, XGA, WXGA, SXGA, SXGA+ and
UXGA are registered trademarks of International
Business Machines Corporation.
UXGA are registered trademarks of International
Business Machines Corporation.
15
0#
0#
LC-37DH77E_ES.indd 35
2008/12/16 13:50:34
AUDIO IN
HDMI (DVI)
SCART cable
Decoder
$)')4!,
SPDIF
SPDIF
DIGITAL
AUDIO
OUTPUT
Audio
cable
Amplifier with digital
audio input
●
●
After connection
●
If after connecting a PC to the TV through a HDMI cable,
the audio does not run, connect a mini stereo connector of
ø 3.5mm between TV and PC as indicated in the previous
drawing.
ø 3.5mm between TV and PC as indicated in the previous
drawing.
●
When a PC is connected to the TV with a DVI cable, it
will be necessary to connect a mini stereo connector of ø
3.5mm of the TV to PC as indicated in the previous drawing
3.5mm of the TV to PC as indicated in the previous drawing
●
●
After connecting
Digital audio output setting
After connecting an amplifier with digital audio input and
external speakers as shown, you should set an audio
output format compatible with the programme you are
watching or the device connected.
external speakers as shown, you should set an audio
output format compatible with the programme you are
watching or the device connected.
Go to “MENU” > “SOUND” > “SPDIF Mode” >
select “PCM” or “Dolby Digital”.
select “PCM” or “Dolby Digital”.
NOTE
• When you set this to “Dolby Digital”, and you receive
the Dolby Digital or Dolby Digital Plus audio formats,
Dolby Digital audio is output. Otherwise, PCM audio is
output.
When you set this to “PCM”, PCM audio is output no
matter what audio formats you receive.
Dolby Digital audio is output. Otherwise, PCM audio is
output.
When you set this to “PCM”, PCM audio is output no
matter what audio formats you receive.
Example of connectable devices
●
Connecting an amplifier with digital audio
input
NOTE
• The menu options differ in the selected input modes, but the operating procedures are the same.
• The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from
• The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from
the actual screens.
• Items in darker grey cannot be selected.
Menu operation
1
3
2
What is the menu?
• You need to call up the OSD to perform settings for the TV. The OSD for the settings is called menu.
• The menu enables various settings and adjustments.
• The menu can be operated with the remote control unit and with the TV panel control keys.
• The menu enables various settings and adjustments.
• The menu can be operated with the remote control unit and with the TV panel control keys.
Common operations
Operation without a remote control unit
(with the TV panel control keys)
About the Guide Display
The Guide Display at the bottom of the screen shows
operations with the OSD.
operations with the OSD.
The bar above is an operational guide for the remote
control unit. The bar will change in accordance with
each menu setting screen.
control unit. The bar will change in accordance with
each menu setting screen.
Picture mode User Eco
Picture mode User
Backlight
50
Contrast
50
Backlight
50
This function is useful when there is no
remote control unit within your reach.
remote control unit within your reach.
1
Press MENU and the “PICTURE”
screen displays.
screen displays.
2
Press Pr/s instead of
a/b or
i
k/l instead of c/d to select
the item.
3
Press b to complete the setting.
NOTE
• The “PICTURE” screen will disappear if left unattended for
several seconds.
16
Display the menu
screen
Exit the menu
screen
Select an item
Press MENU and the “PICTURE”
screen displays.
screen displays.
The operation will exit the menu
screen if you press END before it is
completed.
screen if you press END before it is
completed.
Press
a/b/c/d to select/adjust the
desired menu, and adjust the item to
the desired level, and then press OK.
the desired level, and then press OK.
Press MENU to return to the previous
page.
page.
E
Selecting in the menu
E
Selecting options
PICTURE
Picture mode User
Backlight
50
Contrast
50
Brightness
50
Colour
50
Sharpness
60
END
MENU
OK
PICTURE
Tint 50
Colour temperature Cool
Aspect ratio
Full
Noise
reduction
AUTO
END
MENU
OK
END
MENU
OK
Basic adjustment
Audio settings
When the Sound Mode is set to “User”, the sound
can be adjusted according to your preferences. See the
following setting table.
can be adjusted according to your preferences. See the
following setting table.
Adjustments options
Selected
setting
◄ Button
► Button
Treble
Reduce trebles
Increase trebles
Bass
Reduce bass
Increase bass
Balance
Increase audio from
the left speaker
Increase audio from
the right speaker
Auto
Volume
Off
On
Surround
Sound
Off
On
SPDIF
Mode
(PCM) Activates
digital audio output
Dolby Digital
●
Sound Mode
Select your desired setting. The available options
are:
are:
S
TANDARD
→MUSIC→MOVIE→SPORTS→USER
6
●
Auto Volume
Reduces sudden volume changes, for example,
during commercials or when switching from one
channel to another.
during commercials or when switching from one
channel to another.
●
●
Surround Sound
This function allows you to enjoy surround sound.
●
●
SPDIF Mode
Digital audio output
.
Picture settings
When the Picture Mode is set to “User”, the picture
can be adjusted according to your preferences. See
the following setting table.
can be adjusted according to your preferences. See
the following setting table.
Adjustments options
Selected
setting
◄ Button
► Button
Backlight
The screen dims
The screen
brightens
Contrast
Contrast goes down
Contrast goes up
Brightness
Brightness goes
down
Brightness goes up
Colour
Colour intensity goes
down
Colour intensity
goes up
Sharpness
Soften details
Emphasize details
Tint
Skin tones become
purplish
Skin tones become
greenish
Colour
Temperature
Reddish white
Bluish white
Aspect Ratio
Changes between different picture sizes
Noise
Reduction
*
Improves picture quality
(choose among different options)
*
This function may be not available in some types of input
signal.
AV MODE
“AV MODE” gives you several viewing options to
choose from to best match your system environment,
which can vary due to factors like room-brightness,
type of programme watched or the type of image input
from external equipment.
choose from to best match your system environment,
which can vary due to factors like room-brightness,
type of programme watched or the type of image input
from external equipment.
1 Press AV MODE.
2 Every time AV MODE is pressed the TV changes
the mode as follows
the mode as follows
:
STANDARD
→ SOFT → ECO → USER → DYNAMIC
6
Picture adjustments
Picture
Sound
Sound adjustments
PICTURE
Picture mode User
Backlight
50
Contrast
50
Brightness
50
Colour
50
Sharpness
60
END
MENU
OK
17
Basic adjustment
This adjustment allows you to set or to display the
following functions: Clock, Off / On Timer and Sleep
Timer.
following functions: Clock, Off / On Timer and Sleep
Timer.
●
●
Clock
This function allows you to display the clock
information (day / month / hour/ minute). The time
and the date can’t be modified in this option.
information (day / month / hour/ minute). The time
and the date can’t be modified in this option.
●
●
Off Timer
Allows you to set a time when the TV automatically
enters in standby mode.
enters in standby mode.
●
●
On Timer
Allows you to set the time when the TV must switch
on.
on.
●
Sleep Timer
Allows you to setup the automatic Switch Off for:
10min., 20min., 30min., 60min., 90min., 120min.,
180min. and 240 min..
10min., 20min., 30min., 60min., 90min., 120min.,
180min. and 240 min..
NOTE
•
Select “Off” to cancel the sleep timer.
• When the time has been set, countdown starts
automatically
.
• The last minute is displayed second to second.
●
●
No Operation Off
Switches the TV off when no key is pressed for 3
hours.
hours.
●
●
No Signal Off
When this function is activated the TV automatically
enter standby mode if there is no signal input during
10 minutes.
enter standby mode if there is no signal input during
10 minutes.
●
●
Time Zone
Allows you to setup the time zone.
●
●
Summer time
Allows you to change automatically to summer time
(auto, off, on.)
(auto, off, on.)
Channel settings
Channel
Channel adjustments
Allows to reconfigure the channels after initial auto
installation has been completed.
installation has been completed.
●
●
Auto Tuning
This function allows you to select the country and
automatically adjusts the channels for digital and
analogue individually.
automatically adjusts the channels for digital and
analogue individually.
●
●
DTV Manual Tuning
Allows you to tune digital channels manually.
●
ATV Manual Tuning
Allows you to tune in analogue channels manually.
●
Programme Edit
Allows you to delete channels, to skip channels and to
set up a favourite channels list.
set up a favourite channels list.
Select the channel you want to reorganize and press
the RED button to delete it, the BLUE button to skip it
(to ignore it), YELLOW button to move it, ESG to mark
it as favourite or GREEN button to rename it (only in
ATV mode.)
(to ignore it), YELLOW button to move it, ESG to mark
it as favourite or GREEN button to rename it (only in
ATV mode.)
NOTE
If you press ESG when you are not in any adjustment menu,
the favourite channel list will appear.
the favourite channel list will appear.
●
●
Signal Information
Show the signal power and quality.
●
●
●
CI Information
Allows to see the CA card information (Conditional
Access Module): name, supplier and OSD.
Install channels
Time settings
Time
Time adjustments
Option settings
18
Click on the first or last page to see other LC-32FH500 (serv.man23) service manuals if exist.