Sharp LC-32FH500 (serv.man23) User Manual / Operation Manual ▷ View online
●
OSD Language
Allows you to select the screens language.
●
Audio Languages
Allows you to select the audio language.
●
Subtitle Language
Allows you to select the subtitles language.
●
Hearing Impaired
This function allows you to activate or deactivate the
subtitles for the hearing impaired. These subtitles have
priority.
priority.
NOTE
Subtitles will not be displayed when the service does not
contain subtitle information.
contain subtitle information.
●
Timeshift setup (only F
*510 models)
Allows select modes, disk, disk setup and speed test
for Timeshift function.
See the operation on page 24.
for Timeshift function.
See the operation on page 24.
●
Restore factory default
Recover the configuration that the TV had when it left
the factory.
●
Software Update (USB)
This option allows you to have the TV software version
always updated.
1
Add the binary file to USB memory root.
2
Insert the memory in the TV USB socket.
3
Press MENU on the remote control unit and
select OPTION.
4
Press
▼ until Software Update (USB) option
appears.
• Press OK. Are you sure? message is displayed.
• Select Yes with ◄/► and press OK. The software
update will start.
•The updated percentage appears. The TV will
restart automatically when the process arrives at
100%.
update will start.
•The updated percentage appears. The TV will
restart automatically when the process arrives at
100%.
5
Return to OPTION menu to check that the version
has been updated successfully.
Basic adjustment
This function allows you to use a password to lock
certain programs and adjustments.
certain programs and adjustments.
The password is always needed to access to this
menu ( by default, the password is 1234.)
menu ( by default, the password is 1234.)
●
Set password
Allows you to change the password. Press OK, enter
the new password and confirm.
●
Block program
The password is needed before locking one
program.
1 Select the program or programs you want to lock
program.
1 Select the program or programs you want to lock
and press GREEN button. A padlock appears next
to the locked channel in the channel list
to the locked channel in the channel list
.
2 Press End to exit.
This option enters your selection in a locked channels
list.
This option enters your selection in a locked channels
list.
NOTE
• To prevent the channel search, when one program is locked,
• To prevent the channel search, when one program is locked,
the channel menu is locked too.
• To view a locked channel, you must enter the password.
When you select a locked channel a password prompt
message pops up.
message pops up.
• You must repeat the previous steps to unlock one locked
program.
●
Parental Guidance
This function allows you to restrict DTV programs
depending on the age classification.
The information about classification is provided by the
broadcasting station.
depending on the age classification.
The information about classification is provided by the
broadcasting station.
Options
Options menu
Lock settings
Lock programs
Lock
●
●
DivX
®
registration code (VOD)
This TV allows play video on demand (DivX
®
VOD).
To activate this option you need to register the TV at
www.divx.com/vod, download the VOD log file and
reproduce it in TV.
www.divx.com/vod, download the VOD log file and
reproduce it in TV.
●
Deactivation code DivX
®
(VOD)
Displays the deactivation code necessary to write off
this TV at www.divx.com/vod.
this TV at www.divx.com/vod.
19
You can display the channel information that you are
watching at this moment by pressing p on the remote
control unit.
watching at this moment by pressing p on the remote
control unit.
Information that appears on the screen:
Program number
Program name
Channel information
Language
Teletext
Information about the program which is
being broadcast
Channel list
Selecting the channel
you want to watch
Selecting the picture
format manually
You can select the picture format. The selected picture
format varies depending on the type of signal received.
format varies depending on the type of signal received.
1 Press f on the remote control unit to change
between different kinds of pictures.
NOTE
Some items do not appear depending on the type of received
signal.
signal.
Normal 4:3 :
Keeps the original aspect ratio in a full
screen display.
Zoom 14:9
: For 14:9 letterbox pictures. A thin
side bar appears on each side, and you may
also see bars on the top and bottom with some
programs.
also see bars on the top and bottom with some
programs.
Panorama:
In this mode, picture is stretched toward
each side of the screen. The picture may appear
similar to “Full” depending on broadcast signals.
similar to “Full” depending on broadcast signals.
Full:
For 16:9 squeeze pictures.
Cinema 16:9:
For 16:9 letterbox pictures. Bars
may appear on the top and bottom with some
programs.
programs.
Cinema 14:9:
For 14:9 letterbox pictures. Bars
may appear on the top and bottom with some
programs.
programs.
Auto:
The TV selects the picture size automatically.
Channel information display
(DTV only)
1
Press OK and the list of tuned channels will be
displayed.
2
Use ▲/▼ to select the channel you want to watch
and press OK.
Selecting the picture format
Full:
Overscan image. Cuts out all sides of the
picture.
Underscan:
Displays a high definition picture
adjusted perfectly. Picture noise may appear on
the sides of picture with some programs.
the sides of picture with some programs.
Auto:
this mode allows the TV to change between
different picture sizes automatically.
Sizes for SD Signal (Standard Definition)
Sizes for HD Signal (High Definition) HDMI
Useful viewing functions
CLEARING THE PIN
If you lose or forget your PIN, you can clear the PIN
following these steps:
following these steps:
1
Go to «MENU»
→«LOCK»→«PASSWORD».
2
Enter “3001” to cancel out the current PIN.
The current PIN is reset to “1234”.
20
After selecting Media Player, the TV loads USB device
files, and shows the following screen:
files, and shows the following screen:
1
Pressing
◄/► buttons you can change between
different modes: PHOTO, MUSIC, MOVIE or TEXT.
Press OK to select the option you want to reproduce.
Press OK to select the option you want to reproduce.
2
Press
▲/▼/◄/► to select the folder where
you want to search the files and then press OK.
For selecting the input type of external equipment
• If no (colour) image is displayed, try changing to
another signal type.
• Check the operations manual of the external equipment
for the signal type.
Connect an USB device to the TV as shown below.
• Depending on the USB device, the TV may not be
able to recognise the contained data.
• Use only alphanumeric characters for naming files.
• File names over 80 characters (may vary depending
on character set) may not be displayed.
• Do not disconnect a USB device or memory card from
the TV while transferring files, using the slide show
function, when a screen is switching to another or
before you exit “MEDIA PLAYER” from the “INPUT
SOURCE” menu.
function, when a screen is switching to another or
before you exit “MEDIA PLAYER” from the “INPUT
SOURCE” menu.
• Compatibility with USB hard disc connection.
• Do not connect and disconnect a USB device from
the TV repeatedly.
Other useful features
Input source settings
Setting when using external
devices
devices
SCART 1: CVBS, RGB
SCART 2: Y/C, CVBS
SCART 2: Y/C, CVBS
MEDIA PLAYER function
Connecting a USB device
(Media Player)
PHOTO mode
You can reproduce photos with JPG, JPEG and BMP
format on your TV.
Several kinds of reproduction are possible.
format on your TV.
Several kinds of reproduction are possible.
1
Select PHOTO mode and press OK.
2
Select the file you want to display on full screen with
▲/▼ /◄/► buttons and press OK to start the viewing.
21
Buttons for full screen display operation
Viewing photos on full screen
Buttons
Description
▲/▼ (Cursor)
Go to the previous/next photo in the
same directory..
same directory..
◄/► (Cursor)
Select
/ unselect the photos you want
to see.
END button
Go back to the previous screen.
f button
Zoom:
▲/▼/◄/► allow to move through
the pictures when zoom is activated.
A button
Rotates 90º the photo on screen.
Reproduces MP3 music files.
1
Select MUSIC mode and press OK.
2 Select the files you want to reproduce with ▲/▼ /◄/►
buttons and press
OK to start the reproduction.
3 Press OK to stop the reproduction of MP3 files and
press END to exit the MUSIC mode.
• You can stop/restart the reproduction pressing OK.
Buttons
Description
▲/▼ (Cursor)
Go to the previous/next track in the same
directory.
directory.
◄/► (Cursor)
•
Mark with X the tracks you want to play
(on MUSIC MENU)
•
Backward / Fast forward ( on reproduction
mode)
END button
Go back to the previous screen.
RED button
Options:
Reproduce the selected files
Reproduce the selected files
indefinitely.
Reproduce the folder files only once.
When the reproduction has finished, go
back to the previous screen.
back to the previous screen.
ⒶReproduce all the files on the folder
indefinitely.
MOVIE mode
Reproduces films and videos.
1 Select MOVIE mode and press OK.
2 Select the files you want to reproduce with ▲/▼ /◄/►
2 Select the files you want to reproduce with ▲/▼ /◄/►
buttons and press OK to start the reproduction.
• If there is only one file, the reproduction will start automatically
when this file is selected.
3
Press OK to stop / restart the reproduction.
4
Press END to exit the MOVIE mode.
TEXT mode
Displays text files.
1
Select TEXT mode and press OK.
2
Select the file you want to display with
▲/▼ /◄/►
buttons and press OK. The selected file will appear
on full screen.
on full screen.
3 You can move up and down in the file with ▲/▼/◄/►
buttons.
4 You can display the previous or next text file with
◄/► buttons.
5 Press END to exit the TEXT mode.
MUSIC mode
Buttons
Description
▲/▼ (Cursor)
Go to the previous/next file in the same
directory (on MOVIE MENU)
directory (on MOVIE MENU)
◄/► (Cursor)
•
Mark with X the files you want to play.
•
Backward / Fast forward
(on reproduction mode)
END button
Go back to the previous screen
.
RED button
-Movie Menu options:
Only reproduces the selected file
Only reproduces the selected file
.
Reproduce the folder files only once.
When the reproduction has finished, go
back to the previous screen.
Ⓐ Reproduce the folder files indefinitely.
back to the previous screen.
Ⓐ Reproduce the folder files indefinitely.
-On reproduction mode
:
Allows you to repeat a fragment of a
film indefinitely. The first keystroke defines
A (initial point), the second keystroke
defines B (final point). The third keystroke
restarts the normal reproduction.
A (initial point), the second keystroke
defines B (final point). The third keystroke
restarts the normal reproduction.
BLUE button
y
y
Allows you to backward or forward until a
point in the movie.
Introduce “hh:mm:ss” and press OK.
point in the movie.
Introduce “hh:mm:ss” and press OK.
Buttons for music reproduction
Other useful features
Buttons for film reproduction
AB
22
Click on the first or last page to see other LC-32FH500 (serv.man23) service manuals if exist.