DOWNLOAD Sharp LC-32CT2E (serv.man2) Service Manual ↓ Size: 4.79 MB | Pages: 109 in PDF or view online for FREE

Pericom Semiconductor.s PI5V series of mixed signal video circuits are produced in the 
Company.s  advanced  CMOS low-power  technology,  achieving  industry  leading 
performance.

The 

PI5V330 

is 

a 

true 

bidirectional 

Quad 

2-channel

multiplexer/demultiplexer  that  is  recommended  for  both RGB  and  composite  video 
switching applications. The VideoSwitch. can be driven from a current output RAMDAC 
or  voltage  output  composite  video  source. Low  ON-resistance  and  wide  bandwidth 

make  it  ideal  for video  and  other  applications.  Also  this  device  has  exceptionally high 
current capability which is far greater than most analog switches offered today. A single 
5V supply is all that is required for operation. The PI5V330 offers a high-performance, 
low-cost solution to switch between video sources. The application section describes the 
PI5V330 replacing the HC4053 multiplier and buffer/amplifier.

 High-performance, low-cost solution to switch between video sources

 Wide bandwidth: 200 MHz

 Low ON-resistance: 3Ω

 Low crosstalk at 10 MHz: .58 dB

 Ultra-low quiescent power (0.1 µA typical)

 Single supply operation: +5.0V

 Fast switching: 10 ns

 High-current output: 100 mA

 Packages available:

 16-pin 300-mil wide plastic SOIC (S)

 16-pin 150-mil wide plastic SOIC (W)

 16-pin 150-mil wide plastic QSOP (Q)

AZC099-04S  is  a  high  performance  and  low  cost  design  which  includes  surge  rated 
diode  arrays to  protect  high  speed  data  interfaces.  The  AZC099-04S  family  has  been 
specifically designed to protect sensitive components, which are connected to data and 
transmission  lines,  from  over-voltage  caused  by  Electrostatic  Discharging  (ESD), 
Electrical Fast Transients (EFT), and Lightning. 
AZC099-04S  is  a  unique  design  which  includes  surge  rated,  low  capacitance  steering 
diodes  and  a  unique  design  of  clamping  cell  which  is  an  equivalent  TVS  diode  in  a 
single  package.  During  transient  conditions,  the  steering  diodes  direct  the  transient  to 
either the power supply line or to the ground line. The internal unique design of clamping 
cell prevents over-voltage on the power line, protecting any downstream components. 
AZC099-04S may be used to meet the ESD immunity requirements of IEC 61000-4-2, 
Level 4 (± 15kV air, ±8kV contact discharge). 

 ESD Protect for 4 high-speed I/O channels

 Provide ESD protection for each channel to IEC 61000-4-2 (ESD) ±15kV (air), 

±8kV (contact) IEC 61000-4-4 (EFT) (5/50ns) Level-3, 20A for I/O, 40A for Power 
IEC 61000-4-5 (Lightning) 4A (8/20μs) 

 5V operating voltage  Low capacitance : 1.0pF typical 

 Fast turn-on and Low clamping voltage 

 Array of surge rated diodes with internal equivalent TVS diode 

 Small package saves board space 

 Solid-state silicon-avalanche and active circuit triggering technology

The TDA1308; TDA1308A is an integrated class-AB stereo headphone driver contained 
in an SO8, DIP8 or a TSSOP8 plastic package. The TDA1308AUK is available in an 8 
bump wafer  level  chip-size  package  (WLCSP8).  The  device  is  fabricated  in  a  1  mm
Complementary  Metal  Oxide  Semiconductor  (CMOS)  process  and  has  been  primarily
developed for portable digital audio applications. The difference between the TDA1308 
and the TDA1308A is that the TDA1308A can be used at low supply voltages.

 Wide temperature range

 No switch ON/OFF clicks

 Excellent power supply ripple rejection

 Low power consumption

 Short-circuit resistant

 High performance

 High signal-to-noise ratio

 High slew rate

 Low distortion

 Large output voltage swing