Sharp LC-28HM2E (serv.man15) User Manual / Operation Manual ▷ View online
27
GB
FIXED
VARIABLE
FIXED
VARIABLE
FIXED
INPUT
OUTPUT
AV - 3
WIDE VIEW
C-SYSTEM
DI
PICTURE
SOUND
OPT
OUTPUT
INPUT
INPUT
AV - 3
WIDE VIEW
C-SYSTEM
DI
PICTURE
SOUND
OPT
V - 3
C-SYSTEM
DISPLAY
RESET
SOUND
OPTION
Adjusting the OPTION Settings
This menu is for advanced functions.
Details of adjustment items are described on the following pages.
Details of adjustment items are described on the following pages.
1
Press MENU to display the Menu screen.
Press
Press
\| to move the cursor to OPTION
and then press ENTER.
2
Press
\| to move the cursor and select
the desired mode.
Then press ENTER.
Then press ENTER.
3
Press
\| to move the cursor and select
the desired adjustment.
Then press ENTER.
Then press ENTER.
4
Press
\| to make the adjustment and
then press ENTER.
POWER
1
2
3
1
2
PC
INPUT
COMPONENT
MUTE
MENU
ENTER
VOL
AV INPUT
LCD MONITOR
Adjustment
GB
28
AV mode
Mode
IMAGE
WIDEVIEW
(See page 38.)
(See page 38.)
AV-3
C-SYSTEM
DISPLAY
RESET
Selected item
[NORMAL]
Normal horizontal picture orientation
Normal horizontal picture orientation
[MIRROR]
Mirror image
Mirror image
➞ To display mirror picture for special uses.
[FULL]
This mode displays the full screen of the video signal received. (The picture is
displayed slightly stretched vertically.)
This mode displays the full screen of the video signal received. (The picture is
displayed slightly stretched vertically.)
[STRETCH]
This mode displays pictures based on the width of the screen. Bands are present
at the top and bottom. (Aspect ratio is 16:9)
This mode displays pictures based on the width of the screen. Bands are present
at the top and bottom. (Aspect ratio is 16:9)
[INPUT]
AV INPUT 3 put in input mode
AV INPUT 3 put in input mode
[OUTPUT]
AV INPUT 3 changes to AV output mode.
AV INPUT 3 changes to AV output mode.
➞ Video/Audio signals entering AV
INPUT 1 is output from AV INPUT 3 terminals to allow recording.
“FIXED”: The sound level is fixed.
“FIXED”: The sound level is fixed.
➞ Adjust it from the connected AV device (e.g.
an amplifier)
“VARIABLE”: The sound level is not fixed. (The maximum level is as much as in
the FIXED setting)
* No sound from side speakers
“VARIABLE”: The sound level is not fixed. (The maximum level is as much as in
the FIXED setting)
* No sound from side speakers
[AUTO]/[N358]/[N443]/[PAL]/[PAL-60]/[PAL-M]/[SECAM]
* The settings are stored per connection terminal (AV-1/2/3, COMPONET-1/2).
* The settings are stored per connection terminal (AV-1/2/3, COMPONET-1/2).
Even if the power to the unit is cut off, the settings will remain in the memory.
[ON]/[OFF]
Returning to the factory setting
PC mode
Mode
AUTO SYNC
SIGNAL INFO
Selected item
Using this function, a stable computer screen without flicker in the display can be
obtained.
Press ENTER for adjustment.
* Depending on the signal, the AUTO SYNC function may not provide enough
obtained.
Press ENTER for adjustment.
* Depending on the signal, the AUTO SYNC function may not provide enough
adjustment. In this case, perform fine adjustment manually.
Even if the output setting is the same at the computer side (e.g. XGA), slight
discrepancies may occur in the adjustment of the hardware.
Even if the output setting is the same at the computer side (e.g. XGA), slight
discrepancies may occur in the adjustment of the hardware.
This measures and sets the frequency when the display is used as a computer monitor.
Adjustment
29
GB
Connecting a DVD Video Player
When connecting a DVD player, always connect it directly to this unit.
If the signals is input via a video deck, the picture may not be projected properly.
If the signals is input via a video deck, the picture may not be projected properly.
Connecting a VCR/GAME System (AV-1/2)
When connecting game system: “Shooting games” played with a pistol cannot be used.
Connecting AV Equipment (AV INPUT 3/ AV OUT)
• You can output the video and audio signals of AV-1/2 from the AV INPUT 3/AV OUT terminal.
• Set AV-3 setting to “OUTPUT”, and connect the AV INPUT 3/OUT terminal to an input terminal of a
• Set AV-3 setting to “OUTPUT”, and connect the AV INPUT 3/OUT terminal to an input terminal of a
video equipment, and you can record the received video and audio signal on the video equipment.
Note
• Component input signals and PC input signals are disabled for monitor output (recording).
• When using AV-1 or AV-2 with S-video input signal and the AV INPUT 3/AV OUT terminal is set to “OUTPUT”, the
• When using AV-1 or AV-2 with S-video input signal and the AV INPUT 3/AV OUT terminal is set to “OUTPUT”, the
signal is converted to a regular video signal output from AV OUT.
Switching the AV INPUT/OUTPUT
Changing “OUTPUT” to “INPUT”
1
Set the AV-3 setting in the OPTION mode to “INPUT”. For the opera-
tion, refer to “Adjusting the OPTION Settings” (page 27).
tion, refer to “Adjusting the OPTION Settings” (page 27).
2
Select “AV-3” for the input source by using either the INPUT button or
the AV INPUT buttons.
the AV INPUT buttons.
AV-1 AV-2 AV-3 COMPONENT1 COMPONENT2 PC
Changing “INPUT” to “OUTPUT”
* Select the input source other than “AV-3” before going to the OPTION
* Select the input source other than “AV-3” before going to the OPTION
mode to perform Step 1.
1
Set the AV-3 setting in the OPTION mode to “OUTPUT”.
For the operation, refer to “Adjusting the OPTION Settings” (page 27).
For the operation, refer to “Adjusting the OPTION Settings” (page 27).
2
Select “FIXED” (for the optional side speakers) or “VARIABLE” (for a
commercially available speaker system).
commercially available speaker system).
Note
• FIXED: The sound level of the AV OUT is fixed and you can not adjust the
volume using the VOLUME buttons of the unit. Adjust the volume from the
AV equipment that is connected to the unit.
AV equipment that is connected to the unit.
• VARIABLE: The sound level of the AV OUT is variable so that you can use
the VOLUME buttons of the unit to adjust the volume. Note that the sound
from the optional side speakers connected to the unit is muted.
from the optional side speakers connected to the unit is muted.
• The default setting is “VARIABLE”.
Notes for Connection
POWER
1
2
3
1
2
PC
INPUT
COMPONENT
MUTE
MENU
ENTER
VOL
AV INPUT
LCD MONITOR
AV-3
Indicator
Notes for
Connection
GB
30
Connection
This display can be used as the monitor of personal computer. Check the following system requirements
in advance.
in advance.
PC INPUT
AUDIO
R-AUDIO-L
COMPONENT 1
(INPUT)
DISPLAY OUTPUT
RS-232C
110-120V /
220-240V~
COMPONENT 2
(INPUT)
Y
P
B
(C
B
)
P
R
(C
R
)
R-AUDIO-L
Y
P
B
(C
B
)
P
R
(C
R
)
RGB
VIDEO
VIDEO
NTSC / PAL / SECAM
AV INPUT 1
S-VIDEO
VIDEO
R-AUDIO-L
VIDEO
R-AUDIO-L
AV INPUT 3
/ AV OUT
To RGB INPUT terminal
To RGB OUTPUT terminal
Computer
AVC system (Rear)
PC INPUT
AUDIO
DISPLAY OUTPUT
RS-232C
RGB
To PC AUDIO
INPUT terminal
INPUT terminal
To AUDIO
OUTPUT terminal
OUTPUT terminal
Computer
IBM PC(DOS/V,
PC/V, PC/AT)
and compatible
computers
PC/V, PC/AT)
and compatible
computers
Display mode
(Horizontal dots
× Vertical lines)
640
×480
800
×600
1024
×768
Vertical frequency
60-85 Hz
Clock frequency
Approx.30 MHz
Approx.50 MHz
Approx.80 MHz
Note
VGA
SVGA
XGA
Handling of the RGB Connection Cable
Align the pins of this unit and those of the RGB connection cable used to connect the computer and
insert, then securely fasten with the screws located at both ends.
insert, then securely fasten with the screws located at both ends.
Hooking Up to a Computer
Click on the first or last page to see other LC-28HM2E (serv.man15) service manuals if exist.