Sharp LC-28HM2E (serv.man14) User Manual / Operation Manual ▷ View online
Speaker System for the LCD
Monitor
[Appropriate Model]
This speaker system is for exclusive use with model LC-28HM2
MODEL
AN-28SP2
Supplied Accessories
Printed In Japan
TINS-7323CEZZ
SHARP CORPORATION
OSAKA, JAPAN
Printed on post-consumer recycled paper.
Speaker system ... 1 Set
Speaker system
fixing screws ... 4
fixing screws ... 4
Rear cover ... 2
Instruction
Unit: mm
27
116
71.13
448
160
126
Diagram with external dimensions
SPEAKER SYSTEM
INSTRUCTION
Please prepare the following:
• Cushion (soft cloth, etc.)
• Tools (Phillips screwdriver)
• Tools (Phillips screwdriver)
Caution:
• If, due to insufficiently secure attachment or poor handling, the LCD monitor falls or is damaged in other similar
ways, please note that SHARP Corporation will not bear any responsibility.
Attachment
1
Remove the back cover at the rear of the LCD display unit.
2
Remove the screws at the rear of the LCD display unit.
Back cover
Please protect it with a cushion
or a similarly soft cloth to
protect the display against
damage.
or a similarly soft cloth to
protect the display against
damage.
Remove the (four) screws
Rear cover
Rear cover
Weight
Approx. 3.5 kg
Approx. 13.3 kg
(LCD display unit)
Approx. 3.5 kg
Back cover
Cable clamps
Please insert
3
4
Attach the cables and re-attach the back cover at the rear of the LCD display
unit.
unit.
• The cords are fixed using the cable clamps.
Precautions when transporting the LCD display unit
■ When transporting the display, never carry it by holding onto the speakers. Be sure to always carry the display
by holding it with two hands – one hand on each side of the display.
Display (rear panel)
– 2 –
– 3 –
Item Name
AN-28SP2
LCD monitor
LC-28HM2
Display
