Sharp LC-26SH7E Service Manual ▷ View online
2008-03-14
LC-19S7E-BK LC-26S7E-BK LC-32S7E-BK
17
Step 2. Remove the REAR COVER Assy.
1. Remove the 12 screws. Detach the
REAR COVER
as Fig.5.
Fig.5
Step 3. Remove the Main, Power, IR, Key board, and the Speakers.
Fig.6
1. Remove the 4 screws,and disconnect 5 cables to move the Scaler Board as Fig.7
Fig.7
3. Remove the 5 screws and disconnect 2 cables. Detach the Power board as Fig.8.
Fig.8
LC-19S7E-BK LC-26S7E-BK LC-32S7E-BK
18
4. Remove the 2 screws and disconnect 1 cable. Detach the IR board as Fig.9.
Fig.9
5. Remove the 2 screws and disconnect 1 cable. Detach the Key board as Fig.10.
Fig.10
6. Remove the 4 screws .Detach the Speakers as Fig.11
Fig.11
Step 4. Remove the Metal Frame.
Remove the 8 screws. Detach the Metal Frame as Fig.12
Fig.12
Step 5. Remove the Bezel Assy.
1. Remove the 8 screws,Detach the
Bezel Assy
as Fig.13
Fig.13
2008-03-14
LC-19S7E-BK LC-26S7E-BK LC-32S7E-BK
19
2. The below picture is panel as Fig.14
Fig.14
2. Set Re-assembly
To re-assemble the whole set, execute all processes in reverse order.
Notes:
a. While re-assembling, make sure that all cables are placed and connected in their original position.
b. Pay special attention not to damage the EMC foams at the SSB shielding. Check that EMC foams are put
correctly on their places.
LC-19S7E-BK LC-26S7E-BK LC-32S7E-BK
20
CHAPTER 3.
ADJUSTMENT PROCEDURE
PROCEDURE
[1] ADJUSTMENT PROCEDURE
1. OSD Menu
OSD tree - As following
Level 1
Level 2
Level 3
Level 4
remark
Picture
Smart
Picture
Fast menu have
the same item
the same item
Personal
Vivid
Standard
Movie
Game
Eco
Contrast
0 to 100
Brightness
0 to 100
Color
0 to 100
Hue
-50 to 50
Sharpness
0 to 10
Noise
Reduction
Off
Minimum
Medium
Maximum
Colour
Temp
Cool
Normal
Warm
Adv.Picture
Dynamic
contrast
Dynamic
Backlight
MPEG
artefact
reduction
Colour
enhancement
PC
Mode
HDMI Video Timing
Only
Only
Off
On
Picture
format
Auto
Format
EU_VD only
Click on the first or last page to see other LC-26SH7E service manuals if exist.