Sharp LC-26LE430E Service Manual ▷ View online
2008-03-14
LC-19LE430E, LC-22LE430E, LC-26LE430, LC-32LE430E
25
2. Set Re-assembly
To re-assemble the whole set, execute all processes in reverse order.
Notes:
a. While re-assembling, make sure that all cables are placed and connected in their original position.
b. Pay special attention not to damage the EMC foams at the SSB shielding. Check that EMC foams are put
correctly on their places.
LC-19LE430E, LC-22LE430E, LC-26LE430E, LC-32LE430E
26
REMOVING OF MAJOR PARTS(LC-32LE430E)
1. Assy/Panel Removal
Notes: Please put your machine on soft material to avoid to scrape panel when you disassemble it.
Front view
Fig.1
Back view
Fig.2
Step 1. Remove the Base Assy and Base neck.
1. Remove the Base Assy as Fig.3.
Remove the 3 screws as Fig.3 and pull out the base as Fig.4
Fig.3
2. Remove the 4 screws. Detach the Base neck as Fig.4.
2008-03-14
LC-19LE430E, LC-22LE430E, LC-26LE430, LC-32LE430E
27
Fig.4
Step 2. Remove the REAR COVER Assy.
1. Remove the 11 screws. Detach the
REAR COVER
as Fig.5.
Fig.5
Note: How to easy remove rear cabinet
Step 3. Remove the Main and Power board.
Put left hand on the center of rear cabinet
Right hand fingers put under the machine rim
Press down
Pull up
Pull up
Pull up
Pull up
LC-19LE430E, LC-22LE430E, LC-26LE430E, LC-32LE430E
28
Fig.6
1. Disconnect 4 cables and remove the 5 screws Detach the Main board as Fig.7 and Fig.8.
Fig.7
Fig.8
2. Disconnect 2 cables and remove the 6 screws. Detach the Power board as Fig.9.
Note: Push out the AC port from the Bracket, then disconnect the AC cable with the power board.
Fig.9
Step 4. Remove the Bracket, Speakers and Bezel.
1. Remove the 7 screws. Detach the Bracket as Fig.10.
Main board
Power board
Click on the first or last page to see other LC-26LE430E service manuals if exist.