DOWNLOAD Sharp LC-26LE430E Service Manual ↓ Size: 15.96 MB | Pages: 127 in PDF or view online for FREE

Model
LC-26LE430E
Pages
127
Size
15.96 MB
Type
PDF
Document
Service Manual
Brand
Device
TV / LCD
File
lc-26le430e.pdf
Date

Sharp LC-26LE430E Service Manual ▷ View online

         2008-03-14 
LC-19LE430E, LC-22LE430E, LC-26LE430, LC-32LE430E 
 5 
[2] OPERATION MANUAL 
 
Remote control unit 
  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 (POWER) 
Press to turn the LCD TV on or enter standby 
mode. 
 (INPUT SOURCE) 
Select an input source. 
0-9 DIGIT BUTTONS 
To select a TV channel directly. 
EPG 
Press this button to display electronic 
programme guide when watching digital 
channels. 
PRE PR 
To display the previous selected TV channel. 
DTV/ATV 
Press this button to switch between ATV and 
DTV channels. 
PR LIST 
Press to display a list of channels. Then press 
Red button to select the digital or analogue 
channel list.(Only available when your input 
source is TV). 
ECO 
Press this button to set the picture with less 
brightness for saving energy. 
 
Display programme information, if available. 
 (+/-) 
Press to adjust the volume. 
 
Press to toggle audio on and off. You can also 
press 
 (+/-) to restore the previous volume 
level. 
 (Picture format) 
Select picture format to Auto /Normal Zoom 
1Zoom 2 /Wide. 
P (
Press to select the channel. 
DUAL 
Select MONO STEREO DUAL 1 DUAL 2 
for ATV channel. Select Audio language for 
DTV channel. 
AUDIO (ADJ) 
Press to set the LCD TV to a predefined sound 
setting.  
Personal / Music / Speech
 
VIDEO (ADJ) 
Press to set the LCD TV to a predefined picture 
setting. 
Personal / Standard / Vivid / 
Movie / Eco 
SLEEP 
Press to turn the LCD TV off within an amount 
of time. (10 ~ 120 minutes.) 
 
Press ooepπ to navigate and confirm your 
selection. 
OK 
Press to activate a setting. 
MENU 
Press to activate the LCD TV OSD. 
EXIT 
Press to exit the LCD TV OSD or return to the 
previous layer. 
R/G/Y/B (COLOUR BUTTON) 
Press buttons to select the pictures with various 
colours of text. Different channels display 
different functions. 
TELETEXT 
Press this button to activate Teletext. Press 
again to activate Teletext with TV. 
Press again to turn off Teletext. 
SUBTITLE 
For DTV, press this button to toggle off / 
between available subtitle languages. 
For ATV, press this button to toggle 
off / between available subtitle pages 
in Teletext. 
SIZE 
Press this button to change the font size: Full 
screen, Top half and Bottom half. 
SUBPAGE 
To select the subpage when the current page 
contains subpage(s). 
INDEX 
Press this button to return to page 100 or the 
index page; and then press 0 to 9. The teletext 
page will be numbered and added to the page 
you select or the secondary item. 
HOLD 
Press this button to stop the scrolling of pages. 
The text decoder stops receiving data. 
REVEAL 
Reveal hidden information such as answers to a 
quiz. 
FREEZE 
Press to freeze a moving image on the screen. 
(Only available when your input source is TV). 
Scart output signal will also be frozen when you 
are watching digital channels. 
In USB mode: 
(You need to programme the setting with 
remote control to control connected devices.) 
 
Press to skip back to the previous title or track. 
 
Press to stop playback. 
 
Press to start/pause playback. Caution: Do not 
freeze the video image for long periods of time. 
You may damage the TV screen. 
 
Press to skip forward to the next title or track.
 
LC-19LE430E, LC-22LE430E, LC-26LE430E, LC-32LE430E 
6  
TV (Front view)
 
 
 
TV (Rear view) 
 
 
         2008-03-14 
LC-19LE430E, LC-22LE430E, LC-26LE430, LC-32LE430E 
 7 
Preparation 
Mount the TV base 
1. 
Put the TV face down on a safe surface  
that is covered by a soft and smooth cloth. 
2. 
Adjust the TV stand to the bottom of the TV.  
Please be sure the arrow heads are facing  front. 
3.     Fasten the screws by using a cross-head screwdriver(Not supplied).  
NOTE: 
To detach the TV stand, perform the steps in reverse order. 
 
Wall mounting 
 
 
TV screen 
size 
( Inches) 
VESAcompatible 
wall bracket 
(millimeters) 
(W x H) 
Screw type 
19”  
75 x 75 mm 
Metric 4 x 10 mm 
22” 
100 x 100 mm 
Metric 4 x 10 mm 
26” 
100 x 100 mm 
Metric 4 x 10 mm 
32” 
200 x 100 mm 
Metric 4 x 10 mm 
 
NOTE 
•    At the time of purchasing wall bracket, please check if there is enough space between the wall bracket and TV terminals for the terminal connection. 
 
Installation of batteries
 
1. 
Insert two AAA batteries into Remote control. Make sure (+) and (-) are facing the proper  
direction. 
2. 
Replace the cover 
 
NOTE 
•    If the remote control will not to be used for a long time, remove the batteries to avoid remote control 
damage. 
 
CAUTION: 
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below. 
•  Do not mix batteries of different types. Different types of batteries have different characteristics. 
•  Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old batteries. 
•  Remove batteries as soon as they are worn out. Chemicals that leak from batteries come in contact with skin can cause a rash. If you find any chemical 
leakage, wipe thoroughly with a cloth. 
•  The batteries supplied with this product may have a shorter life expectancy due to storage conditions. 
•  If you will not be using the remote control unit for an extended period of time, remove batteries from it. 
 
Note on disposing batteries: 
The batteries provided contain no harmful materials such as cadmium, lead or mercury. Regulations concerning used batteries stipulate that batteries may 
no longer be thrown out with the household rubbish. Deposit any used batteries free of charge into the designated collection containers set up at 
commercial businesses. 
 
LC-19LE430E, LC-22LE430E, LC-26LE430E, LC-32LE430E 
8  
 Using the remote control
 
Use the remote control unit by pointing it towards the remote control sensor. Objects  
between the remote control unit and sensor may prevent proper operation. 
 
 
 
 
 
 
 
 
Display the Menu Screen 
Press MENU and the menu screen displays. 
 
Select an item by the remote control 
1. Press 
<>≥ to select the desired menu. 
2. Press 
≤ ≥  to select / adjust the item to the 
desired level. The setting on screen is applied 
immediately. 
3. 
Press EXIT to return to the previous layer . 
 
 
 
 
 
 
 
Exit the Menu Screen
 
The operation will exit the menu screen if you press EXIT before it is complete. 
 
Page of 127
Display

Click on the first or last page to see other LC-26LE430E service manuals if exist.