DOWNLOAD Sharp 66FW-54H (serv.man11) Service Manual ↓ Size: 648.44 KB | Pages: 36 in PDF or view online for FREE

25

You can lock a TV channel to prevent unsupervised TV viewing by following these procedure.
The protection can apply to the television itself «LOCK ALL» or to specific programmes «LOCK PROGRAMME». With the
CHILD LOCK function, you can also programme a time period during which the TV or the programmes will be protected.
(Your children can not select the channel which you locked).

Press the MENU button  

●

to see the MAIN Menu.

Press the YELLOW button 

to see the Timer Menu.

Press the RED button 

to see the LOCK ALL Menu.

Use this option for protecting the access to the whole TV.

If you wish to block some specific programme, press the

YELLOW button 

and proceed to stage 5. - LOCK

PROGRAMME - on the next page.

Press the Cursor LEFT/RIGHT buttons 

C 

/

I

to select an option:

NONE: To cancel the protection.
ALWAYS: The access to the TV will be protected throughout the day.
TIMER: The access to the TV will be protected during the programmed
period.

If you have selected TIMER, press the Cursor UP/DOWN buttons

E

/

F 

to select:

Start : To enter the hour and minutes, from the beginning of protection, with the Cursor LEFT/RIGHT buttons 

C 

/

I

.

End: To enter the hour and minutes, to the end of protection, with the Cursor LEFT/RIGHT buttons  

C 

/

I

.

Press the MENU button 

● 

to close the LOCK ALL Menu.

26

Use this option to protect the access to separate programmes.
If necessary, repeat steps (1. ~ 3.) .

Press the YELLOW button 

to see the LOCK

Select the programme channel number you want to set with the

Cursor LEFT/RIGHT buttons 

C 

/

I

.

Press the Cursor UP/DOWN buttons  

E

/

F

to select

“Type of protection”. The red point mark indicates the selected
item.

Press the Cursor LEFT/RIGHT buttons  

C 

/

I

to select an

option:

NONE: To cancel the protection from the selected programme.
ALWAYS: To protect the access from the selected programme

throughout the day

AUTO (VPS CODE): To activate the AUTOMATIC PROTECTION and the selected programme will only be blocked

when it receives the VPS signal. This VPS signal is sent by some broadcasting stations, when the programme that
is being shown is not suitable for children.

TIMER: The access to the selected programme will be protected during the programmed period.

If you have selected TIMER, press the Cursor UP/DOWN buttons  

E

/

F

to select:

Start : To enter the hour and minutes, from the beginning of protection, with the Cursor LEFT/RIGHT buttons 

C 

/

I

.

End: To enter the hour and minutes, to the end of protection, with the Cursor LEFT/RIGHT buttons 

C 

/

I

.

Press the MENU button 

● 

to close the LOCK PROGRAMME Menu.

This option enables you to erase all the adjustments made to the
CHILD-LOCK function.
If necessary, repeat steps (1. ~ 3.).

Press the BLUE button 

to see the CLEAR LOCK Menu

Press the BLUE button 

to confirm you want to clear the

CHILD LOCK system.

Notes:In order for the timed protection to function correctly, the internal TV clock must be set at the right time. To
check the time setting see section - Automatic or Manual time adjustment - (page 23).
When you protect one programme, all the external entries (Euro-SCART, AV-1, AV-2, Front A/V or S-Video
terminals) are protected automatically.

LOCK ALL:
When the TV is protected in this way, it will be blocked when switched on and a red box will appear on the screen
(against a blue background), along with the instruction « LOCKED MODE ».
In order to view your TV you must press any digit button  0 ~ 9  of the remote control.
If the protection is timed, the blocking of the TV will only occur during the time period programmed.

LOCK PROGRAMME:
When one or several programmes are protected, the TV will block any attempt to gain access to them and the
instruction « LOCKED MODE » will appear on the screen.
In order to view these programmes you must press any digit button  0 ~ 9  of the remote control.

If the protection of the programme you want to gain access to is timed or automatic, the blocking of the
programme will only take place during the time period programmed or on receiving the special VPS signal for
automatic blocking.

27

EQUALIZATION: Personal / Classic / Jazz / Pop / In Concert / Sport

EQUALIZER

AUTO-INSTALLATION

INSTALLATION

SORTING MODE / DELETE PROGRAMME / EDIT PROGRAMME

EDIT

Complete / Only autoinstallation

DEMO

Password / Post code / Eliminate post code and password

POST CODE

This TV set has: a MAIN MENU with four basic menus which permit
the entrance to the different functions of the TV.
These menus are figured out as indicated below.

(RED button) 

(GREEN button) 

(YELLOW button) 

(BLUE button) 

Factory settings / Memorized / Cinema / Rich / Game / Auto (OPC) / Personal)

MODE

Contrast / Colour / Brightness / Sharpness / MEMORIZE

SPEAKER LEVELS: Volume / Balance / Loudness mode / Volume centre 

/ Volume surround 

 / Noise sequencer  .

HEADPHONES LEVELS: Volume / Balance / Loudness / Bass / Treble

EXTERNAL LEVELS: SCART volume / AV volume

OSD contrast
Tint control : Cool / Warm
NTSC Hue control: Green / Red
ECO mode: On / Off
SVM: Low / Medium / High

LEVELS

ADVANCED

LOCK ALL : Type of protection: NONE / ALWAYS / TIMER: Start - End
LOCK PROGRAMME : Programme

Type of protection: NONE / ALWAYS / AUTO (VPS) / TIMER: Start - End

CLEAR LOCK

CHILD LOCK

Programme / Channel number (Real Channel) / MODE: TV, FILTER, VCR, SKIP
Channel type: Aerial / Cable
Search (Frequency Tuning)
Fine tune

TUNE

Speakers matrix: Stereo, Mono, Dual, Etc.
Headphones matrix: Stereo, Mono, Dual, Etc.
AV matrix: Stereo, Mono, Dual, Etc.
Identification: On / Off

STEREO

AUDIO MODE:

Bypass: Automatic volume correction: Off / Short / Middle / Long
Dolby Pro Logic: Pro Logic Mode: Normal / Wide / Phantom / 3 Stereo

Surround delay: 15 / 20 / 25 / 30 ms.
Speakers: Internal / External

Surround:

Surround spatial
Surround reverberation

Panorama: Surround strength

Speakers: Internal / External

Spatial expander: Automatic volume correction: Off / Short / Middle / Long

Spatial strength

EFFECTS

LEVELS

Comb filter: On / Off
Black level expander: On / Off
Rotation

OTHERS

ON TIMER: Current time / Programmed switch on at
OFF TIMER: Off timer status: 05 ~ 180 minutes
Help

TIMERS

To form TV GUIDE

TV GUIDE

28

Teletext is an information service, organized like a magazine, which is

provided by some television stations in addition to regular television

broadcasting. Your television receives special Teletext signals broadcast

by a TV station, processes the information and displays it graphically on

the screen. News, weather and sports information, stock exchange

prices, program previews and closed captioning for  the deaf are among

the many services available through Teletext.

Teletext information is organized much like a magazine: according to

pages and sub-pages. The basic unit of displayed information is the page.

A sub-page is one of a series of pages.

Teletext reception is controlled by using the remote control. Refer to the

appropriate button descriptions for operation of the Teletext functions.

 

Depending on the TV programme, the Teletext pages are transmitted

using different systems. Your SHARP TV is adjusted to receive 2 Teletext

systems, namely FLOF and LIST, which are automatically identified by

the receiver.

The user can easily identify them by the manner in which they appear on

the screen. .

 

1. Select a TV channel which is broadcasting the Teletext programme you

would like to watch.

2. Press the TEXT/MIX/PICTURE button 

a

/b/a

twice to select the

Teletext Mode.

Teletext information will appear on the screen.

3. Press the TEXT/MIX/PICTURE button 

a

/b/a

twice to go out from

Teletext Mode.

 

Select the appropriate programme channel.

Press the TEXT/MIX/PICTURE button 

a

/b/a

twice to select the Teletext Mode.

To recall a page number displayed in the coloured brackets, simply press the corresponding coloured button 

.

Enter a desired page number with the 0-9 digit buttons. (To select P.100: press 1, 0, 0).

You can sequentially select page numbers by pressing the buttons  

E

/

F

.