DOWNLOAD Sharp XV-Z90E (serv.man29) Service Manual ↓ Size: 744.75 KB | Pages: 7 in PDF or view online for FREE

Model
XV-Z90E (serv.man29)
Pages
7
Size
744.75 KB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Projector / Chapter 5 - Maintenance troubleshooting
File
xv-z90e-sm29.pdf
Date
PREV: Sharp XV-Z90E (serv.man28) User Manual / Operation Manual

Sharp XV-Z90E (serv.man29) User Manual / Operation Manual ▷ View online

Maintenance &
Tr
oubleshooting
-50
Troubleshooting
Check
• Projector power cord is not plugged into the wall outlet.
• Selected input is wrong. (See page 24.)
• Cables incorrectly connected to back panel of the projector. (See pages 12–15.)
• “Contrast” and “Bright” adjustments are set to minimum position. (See page 43.)
• Picture adjustments are not correct. (See page 43.)
• Adjust the focus. (See page 16.)
• Projection distance is too long or too short to allow for proper focus. (See pages 21 and 22.)
• OSD Display is set to “OFF”, preventing to display some or all On-screen Displays. (See
page 36.)
• If the picture is normal, the sound is due to cabinet shrinkage caused by temperature
changes. This will not affect operation or performance of the projector.
• Refer to “Lamp/Maintenance Indicators” on page 44.
• Adjust the “Phase” setting. (See page 33.)
• Change the input signal type. (See page 36.)
Problem
No picture appears.
Colour is faded or poor.
Picture is blurred.
No OSD appears.
An unusual sound is occasion-
ally heard from the cabinet.
Maintenance indicator
illuminates.
Picture noise appears.
Image is green on INPUT 2
COMPONENT.
Image is pink (no green) on
INPUT 2 RGB.
Kensington Security
Standard connector
Rear View
Using the Kensington Lock
Maintenance &
Tr
oubleshooting
-50
Troubleshooting
Check
• Projector power cord is not plugged into the wall outlet.
• Selected input is wrong. (See page 24.)
• Cables incorrectly connected to back panel of the projector. (See pages 12–15.)
• “Contrast” and “Bright” adjustments are set to minimum position. (See page 43.)
• Picture adjustments are not correct. (See page 43.)
• Adjust the focus. (See page 16.)
• Projection distance is too long or too short to allow for proper focus. (See pages 21 and 22.)
• OSD Display is set to “OFF”, preventing to display some or all On-screen Displays. (See
page 36.)
• If the picture is normal, the sound is due to cabinet shrinkage caused by temperature
changes. This will not affect operation or performance of the projector.
• Refer to “Lamp/Maintenance Indicators” on page 44.
• Adjust the “Phase” setting. (See page 33.)
• Change the input signal type. (See page 36.)
Problem
No picture appears.
Colour is faded or poor.
Picture is blurred.
No OSD appears.
An unusual sound is occasion-
ally heard from the cabinet.
Maintenance indicator
illuminates.
Picture noise appears.
Image is green on INPUT 2
COMPONENT.
Image is pink (no green) on
INPUT 2 RGB.
Kensington Security
Standard connector
Rear View
Using the Kensington Lock
Maintenance &
Tr
oubleshooting
-50
Troubleshooting
Check
• Projector power cord is not plugged into the wall outlet.
• Selected input is wrong. (See page 24.)
• Cables incorrectly connected to back panel of the projector. (See pages 12–15.)
• “Contrast” and “Bright” adjustments are set to minimum position. (See page 43.)
• Picture adjustments are not correct. (See page 43.)
• Adjust the focus. (See page 16.)
• Projection distance is too long or too short to allow for proper focus. (See pages 21 and 22.)
• OSD Display is set to “OFF”, preventing to display some or all On-screen Displays. (See
page 36.)
• If the picture is normal, the sound is due to cabinet shrinkage caused by temperature
changes. This will not affect operation or performance of the projector.
• Refer to “Lamp/Maintenance Indicators” on page 44.
• Adjust the “Phase” setting. (See page 33.)
• Change the input signal type. (See page 36.)
Problem
No picture appears.
Colour is faded or poor.
Picture is blurred.
No OSD appears.
An unusual sound is occasion-
ally heard from the cabinet.
Maintenance indicator
illuminates.
Picture noise appears.
Image is green on INPUT 2
COMPONENT.
Image is pink (no green) on
INPUT 2 RGB.
Kensington Security
Standard connector
Rear View
Using the Kensington Lock
Maintenance &
Tr
oubleshooting
-50
Troubleshooting
Check
• Projector power cord is not plugged into the wall outlet.
• Selected input is wrong. (See page 24.)
• Cables incorrectly connected to back panel of the projector. (See pages 12–15.)
• “Contrast” and “Bright” adjustments are set to minimum position. (See page 43.)
• Picture adjustments are not correct. (See page 43.)
• Adjust the focus. (See page 16.)
• Projection distance is too long or too short to allow for proper focus. (See pages 21 and 22.)
• OSD Display is set to “OFF”, preventing to display some or all On-screen Displays. (See
page 36.)
• If the picture is normal, the sound is due to cabinet shrinkage caused by temperature
changes. This will not affect operation or performance of the projector.
• Refer to “Lamp/Maintenance Indicators” on page 44.
• Adjust the “Phase” setting. (See page 33.)
• Change the input signal type. (See page 36.)
Problem
No picture appears.
Colour is faded or poor.
Picture is blurred.
No OSD appears.
An unusual sound is occasion-
ally heard from the cabinet.
Maintenance indicator
illuminates.
Picture noise appears.
Image is green on INPUT 2
COMPONENT.
Image is pink (no green) on
INPUT 2 RGB.
Kensington Security
Standard connector
Rear View
Using the Kensington Lock
Page of 7
Display

Sharp XV-Z90E (serv.man29) User Manual / Operation Manual ▷ Download

Found More:

XV-Z90E (serv.man29) Service Manuals

Preview DownloadPagesSize
XV-Z90E (serv.man11) Chassis layout Service Manual 1 101.68 KB
XV-Z90E (serv.man21) Printed wiring board assemblies Service Manual 6 2.86 MB
XV-Z90E (serv.man20) Schematic diagram - Front and rear R C units Service Manual 1 84.81 KB
XV-Z90E (serv.man19) Schematic diagram - Power unit Service Manual 1 331.05 KB
XV-Z90E (serv.man18) Schematic diagram - Terminal 2 LED unit Service Manual 1 116.46 KB
XV-Z90E (serv.man17) Schematic diagram - Key unit terminal 1 unit Service Manual 1 156.2 KB
XV-Z90E (serv.man16) Schematic diagram - Formatter unit Service Manual 5 918.8 KB
XV-Z90E (serv.man15) Schematic diagram - Main unit Service Manual 8 2.11 MB
XV-Z90E (serv.man14) Description of schematic diagrams Service Manual 2 130.76 KB
XV-Z90E (serv.man13) Overall wiring diagram Service Manual 1 142.67 KB
XV-Z90E (serv.man12) Block diagram Service Manual 1 148.22 KB
XV-Z90E (serv.man10) Troubleshooting table Service Manual 10 30.65 KB
XV-Z90E (serv.man9) Electrical adjustment Service Manual 5 19.15 KB
XV-Z90E (serv.man8) Resetting of the total lamp timer Service Manual 1 24.55 KB
XV-Z90E (serv.man7) Removing of major parts Service Manual 5 424.63 KB
XV-Z90E (serv.man6) Dimensions Service Manual 1 110.1 KB
XV-Z90E (serv.man5) Operation Service Manual 4 296.96 KB
XV-Z90E (serv.man4) Note to service personnel Service Manual 2 21.42 KB
XV-Z90E (serv.man3) Contents Service Manual 1 34.19 KB
XV-Z90E (serv.man26) Chapter 2 - Setup and connections User Manual / Operation Manual 12 1.11 MB
XV-Z90E (serv.man25) Chapter 1 - Important information User Manual / Operation Manual 14 1.78 MB
XV-Z90E (serv.man30) Chapter 6 - Appendix User Manual / Operation Manual 9 987.95 KB
XV-Z90E (serv.man27) Chapter 3 - Operation buttons User Manual / Operation Manual 2 134.31 KB
XV-Z90E (serv.man28) Chapter 4 - Basic operation User Manual / Operation Manual 18 1.88 MB
XV-Z90E (serv.man24) Lamp Installation User Manual / Operation Manual 2 663.66 KB
XV-Z90E (serv.man31) Complete User Manual / Operation Manual 62 5.84 MB
XV-Z90E (serv.man23) Packing of the set Service Manual / Parts Guide 2 157.2 KB
XV-Z90E (serv.man22) Parts list Service Manual / Parts Guide 18 373.56 KB
XV-Z90E (serv.man2) Specifications Service Manual / Specification 1 6.22 KB
XV-Z90E (serv.man33) Change of parts Service Manual / Technical Bulletin 8 672.28 KB
XV-Z90E (serv.man34) Software correction of picture position in 576P signal, horizontal keystone function picture roll in game console connection Service Manual / Technical Bulletin 7 666.37 KB
XV-Z90E (serv.man32) Software upgrade (See Technical bulletin 001) Driver / Update 741.58 KB
XV-Z90E Version 1.4 Handy Guide 45 758.22 KB

RANDOM: