DOWNLOAD Sharp XV-Z90E (serv.man2) Service Manual ↓ Size: 6.22 KB | Pages: 1 in PDF or view online for FREE

This SHARP projector uses a DMD chip. This very sophisticated chip contains 480,000 pixels. As with any high technology electronicequipment
such as large screen TVs, video systems and videocameras, there are certain acceptable tolerances that the equipment must conform to.

Product type

Theater Projector

Model

XV-Z90E

Video system

PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC 4.43/DTV 480i/480P/720P/1080i

Display method

DLP chip, RGB optical shutter method

DLP panel

Panel size: 0.55” (140mm)
Display method: Single Panel Digital Micromirror Device (DMD™) by Texas Instruments
Drive method: Digital Light Processing (DLP™)
No. of dots: 480,000 dots (800 [H] x 600 [V])

Lens

1–1.2 x zoom lens, F3.0, f=32.5–44.0 mm

Projection lamp

DC150 W SHP lamp

Video input signal

RCA Connector: VIDEO (INPUT 4), composite video, 1.0 Vp-p, sync negative, 75   terminated

S-video input signal

4-pin Mini DIN connector (INPUT 3)
Y (luminance signal): 1.0 Vp-p, sync negative, 75   terminated
C (chrominance signal): Burst 0.286 Vp-p, 75   terminated

Component input signal

RCA Connector

(INPUT 1)

Y: 1.0 Vp-p, sync negative, 75   ter minated
P

B

: 0.7 Vp-p, 75   terminated

P

R

: 0.7 Vp-p, 75   terminated

Component input signal

15-pin connector

(INPUT 2)

Analog 0.7 Vp-p 75 
Y: 1.0 Vp-p, sync negative, 75   ter minated
P

B

: 0.7 Vp-p, 75   terminated

P

R

: 0.7 Vp-p, 75   terminated

Component RGB input signal

15-pin connector

(INPUT 2)

RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75   terminated
HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
VERTICAL SYNC. SIGNAL: Same as above

Horizontal resolution

520 TV lines (NTSC 3.58 input)

RGB input signal

15-PIN MINI D-SUB CONNECTOR (INPUT 2):
RGB separate/composite sync/sync on green type analog input: 0–0.7 Vp-p, positive,75   terminated
HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative) or composite sync (Apple only)
VERTICAL SYNC. SIGNAL: Same as above

Pixel clock

12–110 MHz

Vertical frequency

43–75 Hz

Horizontal frequency

15–70 kHz

Computer control signal

9-pin D-sub connector (RS-232C Port)

Rated voltage

AC 100–240 V

Input current

2.1 A

Rated frequency

50/60 Hz

Power consumption

200 W

Heat dissipation

750 BTU/hour

Operating temperature

+5°C to +35°C

Storage temperature

– 20°C to +60°C

Cabinet

Plastic

I/R carrier frequency

38 kHz

Dimensions (approx.)

368(W) x 153.8(H) x 327(D) mm (including swivel stand)
368(W) x 118(H) x 327(D) mm (main body only)

Weight (approx.)

4.3 kg (including swivel stand)
3.8 kg (main body only)

Supplied accessories

Remote control, Two AA size batteries, Power cord, Computer RGB cable, 21 pin RCAconversion adaptor,

Video cable, Terminal cover, Screws for terminal cover, Lens cap (attached on the body), Lens cap strap,
Operation manual

Replacement parts

Lamp unit (Lamp/cage module) (BQC-XVZ90+++1), Remote control (RRMCGA099WJSA), AA size batter-

ies, Power cord for Europe except U.K. (QACCV4002CEZZ), Power cord for U.K., Hong Kong and Singapore
(QACCBA012WJPZ), Power cord for Australia and New Zealand (QACCL3022CEZZ), Computer RGB
cable (QCNW-5050CEZZ), 21 pin RCA conversion adaptor (QSOCZ0361CEZZ), Video cable
(QCNWGA001WJZZ), Terminal cover (GCOVAA116WJKA), Screws for terminal cover (XBBSN40P10000),
Lens cap (CCAPHA004WJ01), Lens cap strap (UBNDT0013CEZZ), Operation manuals; for European 7
languages (TINS-A326WJZZ) / for Chinese, Korean and Arabic (TINSA327WJZZ)

Specifications are subject to change without notice.