DOWNLOAD Sharp XV-Z90E (serv.man28) Service Manual ↓ Size: 1.88 MB | Pages: 18 in PDF or view online for FREE

Model
XV-Z90E (serv.man28)
Pages
18
Size
1.88 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Projector / Chapter 4 - Basic operation
File
xv-z90e-sm28.pdf
Date

Sharp XV-Z90E (serv.man28) User Manual / Operation Manual ▷ View online

Basic Operation
-26
Basic Operations
Using the Menu Screen
On-screen Display
1
INPUT 3 or 4 (VIDEO) mode
1
INPUT 1 (COMPONENT) or 2 (COMPONENT or analog
RGB) mode
4
1 Press MENU. The “Picture” menu screen for the
selected INPUT mode appears.
2 Press  /  to display the other menu screen, if
you want. The icon for the selected menu screen
will be highlighted.
3 Press  /  to select a specific adjustment item.
4 Press ENTER after selecting the item if you want
to display a single adjustment item. Only the
selected adjustment item will appear.
5 Press  /  to adjust the item.
6 Press UNDO to return to the previous screen.
7 To exit the menu screen, press MENU.
• For details on items on the menu screen, see the tree charts
on pages 27 and 28.
This projector has two sets of menu screens that allow
you to adjust the image and various projector settings.
These menu screens can be operated from the projector
or the remote control with the following procedure.
 
5
 
 
2
 
3
3
1, 7
2, 3, 
5
64
 
2
 
Basic Operation
-27
Language (     )
English
Deutsch
Español
Nederlands
Français
Italiano
Svenska
Português
Front
Ceiling
ⳭFront
Rear
Ceiling
ⳭRear
Picture (     )
Tint
Ⳮ30
ⳮ30
Color
Ⳮ30
ⳮ30
Sharp
Ⳮ30
ⳮ30
Contrast
Ⳮ30
ⳮ30
Bright
Ⳮ30
ⳮ30
Red
Ⳮ30
ⳮ30
Blue
Ⳮ30
ⳮ30
Reset
5500k
6500k
8500k
9300k
10500k
Standard
Black Detail
White Detail
Memory 2
Memory 3
Memory 4
Memory 5
Memory OFF
Brighten
7500k
CLR Temp
Gamma
White Emphasis   [ON/OFF]
Picture Setting
Memory 1
Fine Sync (     )
Auto Sync       [ON/OFF]
Clock
Ⳮ30
ⳮ30
Ⳮ30
ⳮ30
Ⳮ30
ⳮ30
Phase
Ⳮ15
ⳮ15
H-Pos
V-Pos
Reset
Special Modes
Signal Info
Resolution
Hor Freq
Vert Freq
640
⳯480
37.5 kHz
72 Hz
640
⳯480
720
⳯480
Digital Shift
Ⳮ30
ⳮ30
Reset
RGB
Background
Options (     )
Component
Blue
None
Auto Power Off  [ON/OFF]
Menu Position
Menu Color
Opaque
Translucent
Center
Lamp Timer
OSD Display   [ON/OFF]
Signal Type
Upper Right
Lower Right
Upper Left
Lower Left
Subtitle
Ⳮ10
ⳮ10
*
PRJ Mode (     )
Items on the INPUT 1 or 2 Mode Menu Bar
* The “Digital Shift” and “Subtitle” cannot be adjusted when
Keystone correction is applied.
• The resolution, vertical frequency and horizontal
frequency figures displayed above are for example
purposes only.
• “Color”, “Tint”, and “Sharp” do not appear when “RGB” is
selected in INPUT 2 mode.
• Only the items highlighted in the tree charts above can
be adjusted.
• To adjust the items under the sub menu, press 
 after
selecting the sub menu.
• “Signal Type” is not displayed when using INPUT 1.
• “Clock”, “Phase”, “H-Pos” and “V-Pos” cannot be used in
the component mode.
Main menu
Sub menu
Main menu
Sub menu
Menu Bars
Basic Operation
-28
Items on the INPUT 3 or 4 Mode Menu Bar
Main menu
Main menu
Sub menu
Picture (     )
Tint
Ⳮ30
ⳮ30
Ⳮ30
ⳮ30
Color
Ⳮ30
ⳮ30
Sharp
Contrast
Ⳮ30
ⳮ30
Bright
Ⳮ30
ⳮ30
Red
Ⳮ30
ⳮ30
Blue
Ⳮ30
ⳮ30
Digital Shift
Ⳮ30
ⳮ30
Subtitle
Ⳮ10
ⳮ10
Reset
Reset
5500k
3D Progressive
6500k
3D Progressive
3D Progressive
8500k 
3D Progressive
9300k
3D Progressive
10500k
3D Progressive
Standard
3D Progressive
Black Detail
3D Progressive
White Detail
3D Progressive
Memory 2
3D Progressive
Memory 3
3D Progressive
Memory 4
3D Progressive
Memory 5
Auto
3D Progressive
Memory OFF
3D Progressive
Brighten
Background
Options (     )
PAL
NTSC3.58
NTSC4.43
PAL–M
PAL–60
SECAM
Language (     )
English
Deutsch
Español
Nederlands
Français
Italiano
Svenska
Português
Blue
None
Auto Power Off  [ON/OFF]
Menu Position
Menu Color
Opaque
Translucent
Center
PRJ Mode (     )
Front
Ceiling
ⳭFront
Rear
Ceiling
ⳭRear
7500k
CLR Temp
Gamma
White Emphasis   [ON/OFF]
Picture Setting
3D Progressive
Memory 1
Lamp Timer
OSD Display   [ON/OFF]
Video System
PAL–N
Upper Right
Lower Right
Upper Left
Lower Left
*
Menu Bars
Sub menu
* The “Digital Shift” and “Subtitle” cannot be adjusted when
Keystone correction is applied.
• Only the items highlighted in the tree charts above can
be adjusted.
• To adjust the items under the sub menu, press 
 after
selecting the sub menu.
• “Tint” cannot be used with PAL, SECAM, PAL-M, PAL-N or
PAL-60.
Basic Operation
-29
2, 3
1, 4
Adjusting the Picture
You can adjust the projector’s picture to your prefer-
ences with the following picture settings. To save the
settings, select a memory from 1 to 5 and OFF (see
page 32) and then adjust the settings.
Description of Adjustment Items
For less contrast
For less brightness
For less colour intensity
Skin tones become purplish
For less sharpness
For weaker red
For weaker blue
Selected item
For more contrast
For more brightness
For more colour intensity
Skin tones become greenish
For more sharpness
For stronger red
For stronger blue
 button
 button
For selecting a desired item from six colour temperature
settings
For selecting a desired item from four gamma positions
For switching “on” or “off” the function that emphasizes
bright portions of the image
For storing all items set in “Picture”
All image adjustment items are returned to the factory
preset settings.
Contrast
Bright
Color
Tint
Sharp
Red
Blue
CLR Temp
Gamma
White Emphasis
Picture Setting
Reset
On-screen Display
e. g. (VIDEO input in INPUT 3 or 4 mode)
1
2
• “Color”, “Tint” and “Sharp” do not appear for RGB input in
INPUT 2 mode.
• For details on “Gamma”, see “Gamma Correction
Function” on page 31.
• For details on “CLR Temp”, see “Adjusting the Colour
Temperature” on page 30.
• For details on “White Emphasis”, see “Description of
White Emphasis” on page 30.
• For details on “Picture Setting”, see “Picture Setting
Function” on page 32.
1 Press MENU. The “Picture” menu screen appears.
2 Press  /   to select a specific adjustment item.
3 Press  /  to move the   mark of the selected
adjustment item to the desired setting.
4 To exit the menu screen, press MENU.
• To reset all adjustment items, select “Reset” on the “Picture”
menu screen and press ENTER.
• “Tint” cannot be used with PAL, SECAM, PAL-M, PAL-N or
PAL-60.
Page of 18
Display

Sharp XV-Z90E (serv.man28) User Manual / Operation Manual ▷ Download

  • DOWNLOAD Sharp XV-Z90E (serv.man28) Service Manual ↓ Size: 1.88 MB | Pages: 18 in PDF or view online for FREE
  • Here you can View online or download the User Manual / Operation Manual for the Sharp XV-Z90E (serv.man28) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp XV-Z90E (serv.man28) Projector. Information contained in Sharp XV-Z90E (serv.man28) User Manual / Operation Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.