Sharp XV-Z9000E (serv.man2) Service Manual ▷ View online
9
XV-Z9000U/E
Projector
Side and Rear Vie
w
AC socket
Intake ventilative hole 4
DC 12 V OUTPUT terminal
(200 mA MAX.)
(200 mA MAX.)
INPUT 5 COMPUTER-RGB port
RGB terminals (RCA)
INPUT 2 COMPONENT/
RGB terminals (RCA)
Wired remote
control jack
VIDEO INPUT 4 terminal (RCA)
S-VIDEO INPUT 3 terminal
(4-pin Mini DIN)
RS-232C port
(9-pin D-sub)
(9-pin D-sub)
Intake ventilative hole
Exhaust ventilative hole
Remote control sensor
INPUT 1 COMPONENT/
(15-pin Mini D-sub)
XV-Z9000U
XV-Z9000E
10
XV-Z9000U/E
Inserting the batteries
1
Pull down the tab on the
battery cover and
remove the cover
towards the direction of
the arrow.
battery cover and
remove the cover
towards the direction of
the arrow.
2
Insert two AA
siz
e
batteries,
making
sure
the polarities match the
+ and – marks inside
the battery compartment.
+ and – marks inside
the battery compartment.
Insert the lower tab of
the battery cover into
the opening, and press
the cover until it clicks
in place.
the battery cover into
the opening, and press
the cover until it clicks
in place.
Remote Control
BACKLIGHT button
POWER buttons (ON/OFF)
ENTER button
UNDO button
INPUT 1 button
INPUT 2 button
INPUT 4 button
THEATER MODE button
RESIZE button
CLR TEMP buttons
MENU button
ADJUSTMENT buttons
(
\
/
|
/
'
/
"
)
INPUT 3 button
INPUT 5 button
AUTO SYNC button
GAMMA button
KEYSTONE button
Front View
Top View
Remote control signal transmitter
Wired remote control jack
Battery cover
Battery
compartment
Battery
3
11
XV-Z9000U/E
The remote control can be used to contr ol the projec-
tor within the range shown on the left.
tor within the range shown on the left.
• The signal from the remote control can be reflected off a
screen for easy operation. However, the effective distance
of the signal may differ due to the scr een material.
of the signal may differ due to the scr een material.
Remote Control
Remote Control
45˚
23 (7 m)
30˚
30˚
45˚
30˚
Using the remote control in a dark
room
room
The backlights of the operation buttons can be tur ned
on for five seconds and of f by pressing BACKLIGHT.
If you want to turn off the backlights while they ar
press BACKLIGHT again.
on for five seconds and of f by pressing BACKLIGHT.
If you want to turn off the backlights while they ar
press BACKLIGHT again.
BACKLIGHT button
Using as a Wired Remote Control
When the remote control cannot be used due to the
range or positioning of the pr ojector (rear projection,
etc.), connect a 3.5 mm stereo minijack cable
(commercially available) fr om the wired remote control
jack on the top of the remote control to the Wired remote
control jack on the back of the projector .
range or positioning of the pr ojector (rear projection,
etc.), connect a 3.5 mm stereo minijack cable
(commercially available) fr om the wired remote control
jack on the top of the remote control to the Wired remote
control jack on the back of the projector .
3.5 mm stereo minijack cable
(commercially available)
(commercially available)
12
XV-Z9000U/E
Connection Pin Assignments
INPUT 5 RGB Signal Input Port: 15-pin Mini D-sub female connector
RGB Input
Analog
1. Video input (red)
2. Video input
2. Video input
(green/sync on green)
3. Video input (blue)
4. Not connected
5. Composite sync
6. Earth (red)
7. Earth (green/sync on green)
4. Not connected
5. Composite sync
6. Earth (red)
7. Earth (green/sync on green)
8. Earth (blue)
9. Not connected
9. Not connected
10. GND
11. GND
12. Bi-directional data
13. Horizontal sync signal
14. Vertical sync signal
15. Data clock
13. Horizontal sync signal
14. Vertical sync signal
15. Data clock
11
6
1
1
15
10
5
10
5
Pin No.
Signal
Name
I/O
Reference
1
Not connected
2
RD
Receive Data
Input
Connected to internal circuit
3
SD
Send Data
Output
Connected to internal circuit
4
Reserved
Connected to internal circuit
5
SG
Signal Ground
Connected to internal circuit
6
Reserved
Connected to internal circuit
7
Reserved
Connected to internal circuit
8
Reserved
Connected to internal circuit
9
Not connected
RS-232C Port: 9-pin D-sub male connector of the DIN-D-sub RS-232C cable
3
5
6
1
Click on the first or last page to see other XV-Z9000E (serv.man2) service manuals if exist.