DOWNLOAD Sharp XV-Z9000E (serv.man2) Service Manual ↓ Size: 1.69 MB | Pages: 31 in PDF or view online for FREE

Model
XV-Z9000E (serv.man2)
Pages
31
Size
1.69 MB
Type
PDF
Document
Service Manual
Brand
Device
Projector / Service Manual - Part 1 - Contents and Text (1-31)
File
xv-z9000e-sm2.pdf
Date

Sharp XV-Z9000E (serv.man2) Service Manual ▷ View online

1
XV-Z9000U/E
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored
to its original condition and only parts identical to those specified should be used.
MODELS
MODELLE
XV-Z9000U/E
DLP PROJECTOR
DLP PROJEKTOR
Im lnteresse der Benutzersicherheit (erforderliche Sicherheitsregeln in einigen Ländern) muß das Gerät in seinen
Originalzustand  gebracht werden.  Außerdem dürfen für die spezifizierten Bauteile nur identische Teile verwendet
werden.
SERVICE MANUAL
SERVICE-ANLEITUNG
SHARP CORPORATION
S81Y7XVZ9000U
2
XV-Z9000U/E
CONTENTS
• SPECIFICATIONS ............................................. 3
• INPOTANT SERVICE SAFETY NOTES ............ 4
• OPERATION MANUAL ...................................... 8
• REMOVING OF MAJOR PARTS ..................... 14
• RESETTING THE TOTAL LAMP TIMER ......... 20
• THE OPTICAL UNIT OUTLINE ........................ 21
• ELECTRICAL ADJUSTMENT .......................... 24
• TROUBLE SHOOTING TABLE ........................ 32
• CHASSIS LAYOUT .......................................... 92
• BLOCK DIAGRAM ........................................... 94
• OVERALL WIRING DIAGRAM ........................ 96
• DESCRIPTION OF SCHEMATIC DIAGRAM ... 98
• WAVEFORMS .................................................. 99
Page
Page
• SCHEMATIC DIAGRAM ................................ 100
• PRINTED WIRING BOARD ASSEMBLIES ... 133
• PARTS LIST
Ë
ELECTRICAL PARTS ............................... 140
Ë
CABINET AND MECHANICAL PARTS .... 154
Ë
ACCESSORIES PARTS ........................... 158
Ë
PACKING PARTS ..................................... 158
• PACKING OF THE SET ................................. 159
INHALT
• TECHNISCHE DATEN ..................................... 49
• HINWEISE FÜR DAS
WARTUNGSPERSONAL ................................. 50
• BEDIENUNGSANLEITUNG ............................. 51
• ENTFERNEN DER HAUPTTEILE ................... 57
• RÜCKSTELLEN DES
LAMPENBETRIEBSZEIT-TIMERS .................. 63
• BESCHREIBUNG DER OPTIK-EINHEIT ........ 64
• ELEKTRISCHE EINSTELLUNG ...................... 67
• FEHLERSUCHTABELLE ................................. 75
• CHASSIS-ANORDNUNG ................................ 92
• BLOCKSCHALTBILD ....................................... 94
• GESAMTSCHALTPLAN ................................... 96
Seite
Seite
• BESCHREIBUNG DES SCHEMATISCHEN
SCHALTPLANS ............................................... 98
• WELLENFORMEN ........................................... 99
• SCHEMATISCHER SCHALTPLAN ................ 100
• LEITERPLATTENEINHEITEN ....................... 133
• ERSATZTEILLISTE
Ë
ELEKTRISCHE BAUTEILE ...................... 140
Ë
CEHÄUSE UND MECHANISCHE
BAUTEILE ................................................ 154
Ë
ZUBEHÖRTEILE ...................................... 158
Ë
VERPACKUNGSTEILE ............................ 158
• VERPACKEN DES GERÄTS ......................... 159
3
XV-Z9000U/E
Specifications
Product type
DLP Projector
Model
XV-Z9000U/E
Video system
PAL/PAL 60/PAL- M/PAL- N/SECAM/NTSC 3.58/NTSC 4.43/DTV 480I/DTV 480P/DTV 720P/DTV 1080I
Computer
VGA/SVGA/XGA/SXGA
Display method
Single panel Digital Micromirror Device™(DMD™) by Texas Instraments
DMD panel
Panel size:0.8" (20.3mm)
No.of dots:921,600 dots (1280 [H ] X 720 [V ])
Lens
1 – 1.35X zoom lens, F3, f = 32.5 – 44.0 mm
Projection lamp
250 W NSH lamp
Contrast ratio
1000:1
Video input signal
RCA Connector:VIDEO,composite video,1.0 Vp-p,sync negative,75 
 terminated (INPUT 4)
S-video input signal
4-pin Mini DIN connector (INPUT 3)
Y (luminance signal):1.0 Vp-p,sync negative,75 
 terminated
C (chrominance signal):Burst 0.286 Vp-p,75 
 terminated
Component input signal
RCA connector (INPUT 1 and 2 terminals)
Y:1Vp-p, sync negative, 75 
 terminated
P
B
/P
R
:0.7Vp-p, 75 
 terminated (XV-Z9000U)
C
B
/C
R
:0.7Vp-p, 75 
 terminated (XV-Z9000E)
Horizontal resolution
720 TV lines (DTV 720P input)
DC output
12V. MAX CURRENT 200mA CENTER + TYPE
Computer RGB input signal
15-
PIN MINI
 D-
SUB CONNECTOR
 (INPUT 5 port):
RGB separate/composite sync/sync on green type analog input:0 – 0.7 Vp-p,positive,
75 
 terminated
H
ORIZONTAL SYNC.SIGNAL
:TTL level (positive/negative)or composite sync (Apple only)
V
ERTICAL SYNC.SIGNAL
:Same as above
Wired Remote Control
3.5 ø Mini jack
Pixel clock
12 – 120MHz
Vertical frequency
43 – 100Hz
Horizontal frequency
15 – 80 kHz
Computer control signal
9-pin D-Sub male connector (RS-232C port)
Rated voltage
AC 100 – 240 V
Input current
3.6 A
Rated frequency
50/60 Hz
Power consumption
345 W (Selecting "BRIGHT" in the "Theater Mode".)
Operating temperature
+
 5 
°
C to 
+
 35 
°
C (41 
°
F  to 
+
 95 
°
F )
Storage temperature
 20 
°
C to 
+
 60 
°
C (
 4 
°
F  to 
+
 140 
°
F)
Cabinet
Plastic
I/R carrier frequency
38 kHz
Dimensions (approx.)
18 
11
16
" (W) X 7" (H) X 15 
15
50
" (D)(475 X 178 X 406mm)(main body only)
18 
11
16
" (W) X 8" (H) X 19 
1
2
" (D)(475 X 203 X 496 mm)(including terminal cover and
adjustment feet)
Weight (approx.)
20.9 lbs.(9.5 kg)
Supplied accessories
Remote control, Two AA size batteries, Power cord (11' 10" ,3.6 m(XV-Z9000U), 1.8m(XV-Z9000E)),
Lens cap (attached), DLP projector operation manual, CD-ROM, CD-ROM operation manual,
Terminal cover, Video cable(XV-Z9000E), VGA cable(XV-Z9000E), 21pin-RCA adaptor(XV-
Z9000E), Guarrantee card for U.S., Guarrantee card for CANADA.
Replacement parts
Lamp unit (Lamp/cage module) (BQC-XVZ9000/1), Remote control (RRMCG1657CESA), AA size
batteries, Power cord (CACCU5013DE01 (XV-Z9000U), QACCV4002CEZZ (XV-Z9000E),
QACCB5024CENA (XV-Z9000E)), Lens cap (PCAPH1056CESA),DLP projector operation manual
(TINS-7415CEZZ (XV-Z9000U), TINS-7521CEZZ (XV-Z9000E)), CD-ROM(UDSKA0047CEN1),
CD-ROM operation manual (TINS-7418CEZZ (XV-Z9000U), TINS-7523CEZZ (XV-Z9000E)), Video
cable(QCNWGA001WJZZ(XV-Z9000E)), VGA cable(QCNW-5050CEZZ(XV-Z9000E)), 21pin-RCA
adaptor(QSOCZ0361CEZZ(XV-Z9000E)), Guarrantee card for U.S.(TGAN-1670CEZZ),
Guarrantee card for CANADA (TGAN-1671CEZZ).
This unit has some inactive pixels within acceptable tolerances which
may result in inactive dots on the picture screen.This will not affect
the picture quality or the life expectancy of the unit.
If you have any questions about this matter,please call toll free 1-
888-GO-SHARP (1-800-237-4277). U.S.A.ONLY
Specifications are subject to change without notice.
This SHARP projector uses a DMD panels.This very sophisticated
panels contain 921,600 pixels. As with any high technology elec-
tronic equipment such as large screen TVs,video systems and video
cameras, there are certain acceptable tolerances that the equip-
ment must conform to.
4
XV-Z9000U/E
IMPORTANT SERVICE SAFETY NOTES (for USA)
Ë
Service work should be performed only by qualified service technicians who are
thoroughly familiar with all safety checks and servicing guidelines as follows:
WARNING
1. For continued safety,  no modification of any circuit
should be attempted.
2. Disconnect AC power before servicing.
BEFORE RETURNING THE PROJECTOR:
(Fire & Shock Hazard)
Before returning the projector to the user,  perform
the following safety checks:
1. Inspect lead wires are not pinched between the
chassis and other metal parts of the projector.
2. Inspect all protective devices such as non-metallic
control knobs, insulating materials, cabinet backs,
adjustment and compartment covers or shields,
isolation resistor-capacity networks, mechanical
insulators, etc.
3. To be sure that no shock hazard exists, check for
current leakage in the following manner:
»
Plug the AC cord directly into a 120-volt AC outlet,
(Do not use an isolation transformer for this test).
»
Using two clip leads, connect a 1.5k ohm, 10 watt
resistor paralleled by a 0.15
µ
F capacitor in parallel
between all exposed metal cabinet parts and earth
ground.
»
Use an AC voltmeter with sensitivity of 5000 ohm per
volt.,  or higher,  sensitivity to measure the AC voltage
drop across the resistor (See Diagram).
»
All checks must be repeated with the AC plug
connection reversed.  (If necessary,  a non-polarized
adapter plug must be used only for the purpose of
completing these checks.)
Any reading of 0.3 volts RMS (this corresponds to
0.2 milliamp. AC.) or more is excessive and indicates
a potential shock hazard which must be corrected
before returning the unit to the owner.
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212
12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212
SAFETY NOTICE
Many electrical  and  mechanical parts in DLP Projector
have special safety-related characteristics.
These characteristics are often not evident from visual
inspection, nor can protection afforded by them be
necessarily increased by using replacement components
rated for higher voltage, wattage, etc.
Replacement parts which have these special safety
characteristics are identified in this manual; electrical
components having such features are identified  by “
å
and  shaded  areas in the Replacement Parts Lists and
Schematic Diagrams.  For continued protection,
replacement parts must be identical to those used in the
original circuit.  The use of a substitute replacement parts
which do not have the same safety characteristics as
the factory recommended replacement parts shown in
this service manual, may create shock,  fire or other
hazards.
AVIS POUR LA SECURITE
De nombreuses pièces, électriques et mécaniques, dans
les projecteur à DLP présentent des caractéristiques
spéciales relatives à la sécurité,  qui ne sont souvent
pas évidentes à vue.
Le degré de protection ne peut pas être nécessairement
augmentée en utilisant des pièces de remplacement
étalonnées pour haute tension, puissance,  etc.
Les pièces de remplacement qui présentent ces
caractéristiques sont identifiées dans ce manuel;
les pièces électriques qui présentent ces particularités
sont identifiées par la marque “
å
” et hachurées dans la
liste des pièces de remplacement et les diagrammes
schématiques.  Pour assurer la protection, ces pièces
doivent être identiques à  celles  utilisées dans le circuit
d’origine.  L’utilisation de pièces qui n’ont pas les mêmes
caractéristiques que les pièces recommandées par
l’usine, indiquées dans ce manuel, peut provoquer des
électrocutions, incendies ou autres accidents.
WARNING: The bimetallic component has the primary
conductive side exposed. Be very careful in
handling this component when the power is on.
AVERTISSEMENT: La composante bimétallique dispose du
conducteur primaire dénudé. Faire
attention lors de la manipulation de cette
composante sous tension.
AC
VOLTMETER
1.5k ohm  (10W)
0.15
µ
F
TEST PROBE
TO EXPOSED
METAL PARTS
CONNECT  TO  KNOWN
EARTH GROUND 
Page of 31
Display

Sharp XV-Z9000E (serv.man2) Service Manual ▷ Download

  • DOWNLOAD Sharp XV-Z9000E (serv.man2) Service Manual ↓ Size: 1.69 MB | Pages: 31 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sharp XV-Z9000E (serv.man2) in PDF for free, which will help you to disassemble, recover, fix and repair Sharp XV-Z9000E (serv.man2) Projector. Information contained in Sharp XV-Z9000E (serv.man2) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.