DOWNLOAD Sharp XV-Z7000 (serv.man5) Service Manual ↓ Size: 31.5 KB | Pages: 13 in PDF or view online for FREE

Model
XV-Z7000 (serv.man5)
Pages
13
Size
31.5 KB
Type
PDF
Document
Service Manual
Brand
Device
Projector / Section 3 - Troubleshooting
File
xv-z7000-sm5.pdf
Date

Sharp XV-Z7000 (serv.man5) Service Manual ▷ View online

45
XV-Z7000U/E
AN-Z7T
Checking the audio 
signal
Are there audio output 
signals at pins (7) of 
IC3301 and IC3302?
Is voltage applied to pin (4) 
of IC1901?
Using the remote control, 
change VOL and cancel 
MUTE. Does the voltage at 
pin (7) of IC1901 vary 
accordingly?
NO
NO
NO
Is there audio output signal 
at pin (5) of IC1901?
YES
YES
YES
YES
Check IC1403, IC1605 and 
their peripheral circuits.
NO
Check IC1901 and its 
peripheral circuits.
Check the SP connector.
Check R1914 first and 
then the power circuit.
Check the audio cable. 
Switch IC3301 and IC3302 
to each other to check the 
peripheral circuits.
Checking the RS-232C
Using the communication 
software ("TERA TERM" 
recommended), make the 
following settings:
Baud rate: 9600 bps
Bit length: 8 bits
Stop bit: 1 bit
Parity: None
Press the RETURN key on 
the keyboard. Does "ERR" 
reappear?
NO
YES
End
Check IC3601, IC1606, 
IC1601, SW1602, IC8022, 
communication circuit and 
their peripheral circuits.
45
XV-Z7000U/E
AN-Z7T
Checking the audio 
signal
Are there audio output 
signals at pins (7) of 
IC3301 and IC3302?
Is voltage applied to pin (4) 
of IC1901?
Using the remote control, 
change VOL and cancel 
MUTE. Does the voltage at 
pin (7) of IC1901 vary 
accordingly?
NO
NO
NO
Is there audio output signal 
at pin (5) of IC1901?
YES
YES
YES
YES
Check IC1403, IC1605 and 
their peripheral circuits.
NO
Check IC1901 and its 
peripheral circuits.
Check the SP connector.
Check R1914 first and 
then the power circuit.
Check the audio cable. 
Switch IC3301 and IC3302 
to each other to check the 
peripheral circuits.
Checking the RS-232C
Using the communication 
software ("TERA TERM" 
recommended), make the 
following settings:
Baud rate: 9600 bps
Bit length: 8 bits
Stop bit: 1 bit
Parity: None
Press the RETURN key on 
the keyboard. Does "ERR" 
reappear?
NO
YES
End
Check IC3601, IC1606, 
IC1601, SW1602, IC8022, 
communication circuit and 
their peripheral circuits.
45
XV-Z7000U/E
AN-Z7T
Checking the audio 
signal
Are there audio output 
signals at pins (7) of 
IC3301 and IC3302?
Is voltage applied to pin (4) 
of IC1901?
Using the remote control, 
change VOL and cancel 
MUTE. Does the voltage at 
pin (7) of IC1901 vary 
accordingly?
NO
NO
NO
Is there audio output signal 
at pin (5) of IC1901?
YES
YES
YES
YES
Check IC1403, IC1605 and 
their peripheral circuits.
NO
Check IC1901 and its 
peripheral circuits.
Check the SP connector.
Check R1914 first and 
then the power circuit.
Check the audio cable. 
Switch IC3301 and IC3302 
to each other to check the 
peripheral circuits.
Checking the RS-232C
Using the communication 
software ("TERA TERM" 
recommended), make the 
following settings:
Baud rate: 9600 bps
Bit length: 8 bits
Stop bit: 1 bit
Parity: None
Press the RETURN key on 
the keyboard. Does "ERR" 
reappear?
NO
YES
End
Check IC3601, IC1606, 
IC1601, SW1602, IC8022, 
communication circuit and 
their peripheral circuits.
45
XV-Z7000U/E
AN-Z7T
Checking the audio 
signal
Are there audio output 
signals at pins (7) of 
IC3301 and IC3302?
Is voltage applied to pin (4) 
of IC1901?
Using the remote control, 
change VOL and cancel 
MUTE. Does the voltage at 
pin (7) of IC1901 vary 
accordingly?
NO
NO
NO
Is there audio output signal 
at pin (5) of IC1901?
YES
YES
YES
YES
Check IC1403, IC1605 and 
their peripheral circuits.
NO
Check IC1901 and its 
peripheral circuits.
Check the SP connector.
Check R1914 first and 
then the power circuit.
Check the audio cable. 
Switch IC3301 and IC3302 
to each other to check the 
peripheral circuits.
Checking the RS-232C
Using the communication 
software ("TERA TERM" 
recommended), make the 
following settings:
Baud rate: 9600 bps
Bit length: 8 bits
Stop bit: 1 bit
Parity: None
Press the RETURN key on 
the keyboard. Does "ERR" 
reappear?
NO
YES
End
Check IC3601, IC1606, 
IC1601, SW1602, IC8022, 
communication circuit and 
their peripheral circuits.
Page of 13
Display

Sharp XV-Z7000 (serv.man5) Service Manual ▷ Download