DOWNLOAD Sharp XV-Z201E (serv.man31) Service Manual ↓ Size: 7.67 MB | Pages: 73 in PDF or view online for FREE

Model
XV-Z201E (serv.man31)
Pages
73
Size
7.67 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Projector
File
xv-z201e-sm31.pdf
Date
PREV: Sharp XV-Z201E (serv.man30) User Manual / Operation Manual

Sharp XV-Z201E (serv.man31) User Manual / Operation Manual ▷ View online

-51
Adjustments and Settings
Using the “Options” Menu
Remaining lamp life
100%
       5%
Approx.
Approx.
4,000 hours
200 hours
Approx.
Approx.
3,000 hours
150 hours
Lamp usage condition
Operated exclusively
in Eco mode (
 )
Operated exclusively
in Standard mode (
)
Checking the Lamp Life
Status
You can confirm the cumulative lamp usage
time and the remaining lamp life (percentage).
Display the “Options” menu to check
the lamp life status.
➝For operating the menu screen, see
pages 38 to 41.
Note
• It is recommended that the lamp be
changed when the remaining lamp life
becomes 5%.
For lamp replacement, contact your near-
est Sharp Authorised Projector Dealer or
Service Centre.
• The table above indicates rough estimates
in the case of using only in each mode
shown. Remaining lamp life changes within
the range of the values shown depending
on the frequency at which “Eco Mode” is
switched to “
” (Eco mode) and “
”
(Standard mode) (see page 53).
Turning on/off the On-
screen Display
This function allows you to turn on or off the
on-screen messages that appear during input
select.
Select “OSD Display” in the “Options”
menu on the menu screen.
➝For operating the menu screen, see
pages 38 to 41.
On-screen Display
On-screen Display
 
(ON)
 
(OFF)
All On-screen Displays are
displayed.
INPUT/FREEZE/AUTO SYNC/
“An invalid button has been
pressed.” are not displayed.
Selected Item
Description
XV_Z201E_E_p51_56.p65
03.10.30, 12:18AM
51
-52
Using the “Options” Menu
-52
Selecting the Signal
Type
This function allows you to select the input
signal type Component or RGB for INPUT 2.
Select  “Signal Type” in the “Options”
menu on the menu screen.
➝For operating the menu screen, see
pages 38 to 41.
Note
• “RGB” or “Component” can be selected
with 
 on the remote control only in
INPUT 2.
Setting the Video Signal
(VIDEO menu only)
The video input system mode is preset to
“Auto”; however, it can be changed to a spe-
cific system mode if the selected system mode
is not compatible with the connected audiovi-
sual equipment.
Select “Video System” in the “Options”
menu on the menu screen.
➝For operating the menu screen, see
pages 38 to 41.
Note
• When the system mode is set to “Auto”,
you may not receive a clear picture due
to signal differences. Should this occur,
switch to the video system of the source
signal.
• “Auto” cannot be set for PAL-M and PAL-
N input signals. Select “PAL-M” or “PAL-
N” in “Video System” menu for PAL-M and
PAL-N input signals.
On-screen Display
On-screen Display
Set when RGB signals are
received.
Set when Component signals
are received.
 
RGB
Component
Selected Item
Description
RGB/COMP. button
XV_Z201E_E_p51_56.p65
03.10.30, 12:18AM
52
-53
Adjustments and Settings
Selecting a
Background Image
This function allows you to select the image
displayed when no signal is being sent to the
projector.
Select “Background” in the “Options”
menu on the menu screen.
➝For operating the menu screen, see
pages 38 to 41.
Setting the Eco Mode
This function allows you to select the desired
power consumption mode.
Select  “Eco Mode” in the “Options”
menu on the menu screen.
➝For operating the menu screen, see
pages 38 to 41.
Note
• Although lamp life and noise are improved
when  “Eco Mode” is set to “
” (Eco
mode), brightness decreases by 20%.
• “Eco Mode” is factory preset to “
” (Stan-
dard mode).
Blue screen
Black screen
 
(Blue)
 
(None)
Selected Item
Description
On-screen Display
On-screen Display
(Eco mode)
(Standard mode)
Brightness
80%
100%
Power consumption
230 W
285 W
Selected Item
Lamp life
Approx.
4,000 hours
Approx.
3,000 hours
XV_Z201E_E_p51_56.p65
03.10.30, 12:18AM
53
-54
-54
Using the “Options” Menu
Center
Upper
Right
Lower
Right
Upper
Left
Lower
Left
Selected Item
The menu is displayed on the
center of the image.
The menu is displayed on the
upper right of the image.
The menu is displayed on the
lower right of the image.
The menu is displayed on the
upper left of the image.
The menu is displayed on the
lower left of the image.
Description
Automatic Power Shut-
off Function
When no input signal is detected for more than
15 minutes, the projector will automatically en-
ter the standby mode if set to “
” (ON).
Select “Auto Power Off” in the “Options”
menu on the menu screen.
➝For operating the menu screen, see
pages 38 to 41.
Note
• “Auto Power Off” is factory preset to “
”.
• When the Auto Power Off function is set to
“
 (ON)”, 5 minutes before the projector
enters the standby mode, the message “En-
ter STANDBY mode in X min.” will appear on
the screen to indicate the remaining minutes.
Selecting the Menu
Screen Position
This function allows you to select the desired
position of the menu screen.
Select “Menu Position” in the “Options”
menu on the menu screen.
➝For operating the menu screen, see
pages 38 to 41.
Selected Item
Description
Projector automatically enters the
standby mode after 15 minutes
without an input signal.
Automatic Power Shut-off disabled.
On-screen Display
On-screen Display
XV_Z201E_E_p51_56.p65
03.10.30, 12:18AM
54
Page of 73
Display

Click on the first or last page to see other XV-Z201E (serv.man31) service manuals if exist.

RANDOM: