Sharp XV-Z201E (serv.man31) User Manual / Operation Manual ▷ View online
-55
Adjustments and Settings
Selecting the Menu
Colour
Colour
This function allows you to select the colour
of the menu screen.
of the menu screen.
Select “Menu Color” in the “Options”
menu on the menu screen.
➝For operating the menu screen, see
pages 38 to 41.
menu on the menu screen.
➝For operating the menu screen, see
pages 38 to 41.
On-screen Display
The menu is displayed
opaquely.
opaquely.
The menu is displayed
translucently. The part of the
menu on the image becomes
transparent.
translucently. The part of the
menu on the image becomes
transparent.
(Opaque)
(Translucent)
Selected Item
Description
XV_Z201E_E_p51_56.p65
03.10.30, 12:18AM
55
-56
This projector is equipped with a reverse/invert image function that allows you to reverse or
invert the projected image for various applications.
invert the projected image for various applications.
Setting the Projection
Mode
Mode
Display the “PRJ Mode” menu and se-
lect the desired projection mode.
➝For operating the menu screen, see
pages 38 to 41.
lect the desired projection mode.
➝For operating the menu screen, see
pages 38 to 41.
Note
• This function is used for the reversed im-
age and ceiling-mount setups. See page 28
for these setups.
for these setups.
On-screen Display
Normal image
Inverted image
Reversed image
Reversed and inverted image
Inverted image
Reversed image
Reversed and inverted image
Front
Ceiling + Front
Rear
Ceiling + Rear
Ceiling + Front
Rear
Ceiling + Rear
Selected Item
Description
Reversing/Inverting Projected Images
-56
XV_Z201E_E_p51_56.p65
03.10.30, 12:18AM
56
Appendix
Appendix
XV_Z201E_E_p57_66.p65
03.10.30, 12:19AM
57
-58
Maintenance Indicators
■ The warning lights on the projector indicate problems inside the projector.
■ If a problem occurs, either the temperature warning indicator or the lamp indicator will illuminate
red, and the projector will enter the standby mode. After the projector has entered the standby
mode, follow the procedures given below.
mode, follow the procedures given below.
TEMPERATURE
WARNING
indicator
WARNING
indicator
POWER
indicator
indicator
LAMP
indicator
indicator
TEMP.
LAMP
POWER
About the temperature warning indicator
If the temperature inside the
projector increases, due to
blockage of the air vents, or the
projector increases, due to
blockage of the air vents, or the
setting location, “
” will
illuminate in the lower left corner of the picture. If
the temperature keeps on rising, the lamp will turn off
and the temperature warning indicator will blink, the
cooling fan will run for a further 90 seconds, and then
the projector will enter the standby mode. After
the temperature keeps on rising, the lamp will turn off
and the temperature warning indicator will blink, the
cooling fan will run for a further 90 seconds, and then
the projector will enter the standby mode. After
“
” appears, be sure to perform the following
measures.
About the lamp indicator
■ The lamp life becomes 0%, when used
for approximately 4,000 hours with “Eco
mode” or when used for approximately
3,000 hours with “Standard mode” (see
page 53).
mode” or when used for approximately
3,000 hours with “Standard mode” (see
page 53).
■ When the remaining lamp life becomes
5% or less, “
” (yellow) will be displayed
on the screen. When the percentage be-
comes 0%, “
comes 0%, “
” will change to “
” (red),
the lamp will automatically turn off and
then the projector will automatically en-
ter the standby mode. At this time, the
lamp indicator will illuminate in red.
then the projector will automatically en-
ter the standby mode. At this time, the
lamp indicator will illuminate in red.
■ If you try to turn on the projector a fourth
time without replacing the lamp, the pro-
jector will not turn on.
jector will not turn on.
Maintenance indicator
Condition
Problem
Possible Solution
Temperature
warning
indicator
Normal
Abnormal
Off
Red on/
Standby
Standby
The internal
temperature is
abnormally high.
temperature is
abnormally high.
Abnormal
• Blocked air intake
• Relocate the projector to an area
with proper ventilation.
• Cooling fan break-
down
• Internal circuit failure
• Clogged air intake
• Take the projector to your nearest
Sharp Authorised Projector Dealer
or Service Centre for repair.
or Service Centre for repair.
Lamp
indicator
Red on/
Standby
Standby
The lamp does
not illuminate.
not illuminate.
• Burnt-out lamp
• Lamp circuit failure
• Carefully replace the lamp. (See
page 59.)
• Take the projector to your nearest
Sharp Authorised Projector Dealer
or Service Centre for repair.
or Service Centre for repair.
• Please exercise care when
replacing the lamp.
Red on
Time to change
the lamp.
the lamp.
• Remaining lamp life
becomes 5% or less.
Power
indicator
The power is
not turned on.
not turned on.
• The lamp unit cover
is open.
• Securely install the cover.
• If the power is not turned on even
when the lamp unit cover is
securely installed, contact your
nearest Sharp Authorised Projec-
tor Dealer or Service Centre for
advice.
securely installed, contact your
nearest Sharp Authorised Projec-
tor Dealer or Service Centre for
advice.
Green on/
Red on
Red on
Off
Green on
Green blinks
when the
lamp is
warming up.
XV_Z201E_E_p57_66.p65
03.10.30, 12:19AM
58
Click on the first or last page to see other XV-Z201E (serv.man31) service manuals if exist.