Sharp XV-Z200E (serv.man32) User Manual / Operation Manual ▷ View online
Connections and Setup
-17
Connecting to
Component Video
Equipment Using a
Component Cable
(INPUT 1)
Component Video
Equipment Using a
Component Cable
(INPUT 1)
Use a component cable when connecting com-
ponent video equipment such as DVD players
and DTV decoders to INPUT 1 terminals.
ponent video equipment such as DVD players
and DTV decoders to INPUT 1 terminals.
1
Connect a component cable to
the projector.
the projector.
2
Connect the above cable to the
component video equipment.
component video equipment.
Note
• Make sure to turn both the projector and
the video equipment off before connect-
ing.
ing.
Connecting to a DVD Player and DTV Decoder
To analog component
output terminal
output terminal
To INPUT 1 terminals
DVD player or
DTV decoder
DTV decoder
Component cable
(commercially available)
XV_Z200E_E_p13_24.p65
03.10.30, 13:13PM
17
Connecting to Compo-
nent Video Equipment
Using a 3 RCA to 15-pin
D-sub Cable and the
DVI to 15-pin D-sub
Adaptor (INPUT 2)
nent Video Equipment
Using a 3 RCA to 15-pin
D-sub Cable and the
DVI to 15-pin D-sub
Adaptor (INPUT 2)
Use a 3 RCA to 15-pin D-sub cable and the
DVI to 15-pin D-sub adaptor when connecting
component video equipment such as DVD
players and DTV decoders to INPUT 2 termi-
nal.
DVI to 15-pin D-sub adaptor when connecting
component video equipment such as DVD
players and DTV decoders to INPUT 2 termi-
nal.
1
Connect a DVI to 15-pin D-sub
adaptor to the projector.
adaptor to the projector.
2
Connect a 3 RCA to 15-pin D-
sub cable to the above adaptor.
sub cable to the above adaptor.
• Secure the connectors by tightening the
thumbscrews.
3
Connect the above cable to the
video equipment.
video equipment.
Note
• When connecting this projector to com-
ponent output terminal of the DTV de-
coder, select “Component” for “Signal
Type” on the OSD menu or press
coder, select “Component” for “Signal
Type” on the OSD menu or press
on
the remote control. (See page 52.)
• Make sure to turn both the projector and
the video equipment off before connect-
ing.
ing.
3 RCA to 15-pin
D-sub cable
Type: AN-C3CP
(3.0 m)
D-sub cable
Type: AN-C3CP
(3.0 m)
DVI to 15-pin
D-sub adaptor
Type: AN-A1DV
(20 cm)
D-sub adaptor
Type: AN-A1DV
(20 cm)
Optional
accessories
accessories
To analog component
output terminal
To INPUT 2 terminal
DVD player or
DTV decoder
DTV decoder
DVI to 15-pin
D-sub adaptor
(sold separately)
D-sub adaptor
(sold separately)
3 RCA to 15-pin
D-sub cable
(sold separately)
D-sub cable
(sold separately)
Connecting the Projector to Other Devices
-18
XV_Z200E_E_p13_24.p65
03.10.30, 13:13PM
18
Connections and Setup
-19
Optional
accessory
accessory
DVI to 15-pin D-sub adaptor
Type: AN-A1DV (20 cm)
Type: AN-A1DV (20 cm)
Connecting to RGB
Video Equipment Using
the DVI to 15-pin D-sub
Adaptor and the RGB
Cable (INPUT 2)
Video Equipment Using
the DVI to 15-pin D-sub
Adaptor and the RGB
Cable (INPUT 2)
Use the DVI to 15-pin D-sub adaptor and the
RGB cable when connecting RGB video equip-
ment such as DVD players and DTV decoders
to INPUT 2 terminal.
RGB cable when connecting RGB video equip-
ment such as DVD players and DTV decoders
to INPUT 2 terminal.
1
Connect a DVI to 15-pin D-sub
adaptor to the projector.
adaptor to the projector.
2
Connect the above adaptor to
an RGB cable.
an RGB cable.
3
Connect the above cable to the
video equipment.
video equipment.
• Secure the connectors by tightening the
thumbscrews.
Note
• When connecting this projector to DVI out-
put of the DTV decoder, select “RGB” for
“Signal Type” on the OSD menu or press
“Signal Type” on the OSD menu or press
on the remote control. (See page 52.)
To RGB output terminal
RGB cable
(commercially
available)
(commercially
available)
To INPUT 2 terminal
DVD player or
DTV decoder
DTV decoder
DVI to 15-pin
D-sub adaptor
(sold separately)
D-sub adaptor
(sold separately)
XV_Z200E_E_p13_24.p65
03.10.30, 13:13PM
19
Optional
accessory
accessory
DVI cable
Type: AN-C3DV
Type: AN-C3DV
(3.0 m)
Connecting to Video
Equipment with the DVI
Output Terminal Using
a DVI Cable (DIGITAL
INPUT)
Equipment with the DVI
Output Terminal Using
a DVI Cable (DIGITAL
INPUT)
Use the DVI cable when connecting video
equipment with the DVI output terminal such
as DVD players and DTV decoders to DIGITAL
INPUT terminal.
equipment with the DVI output terminal such
as DVD players and DTV decoders to DIGITAL
INPUT terminal.
1
Slide the “DIGITAL INPUT
TYPE” switch on the back ter-
minal board to “VIDEO”.
TYPE” switch on the back ter-
minal board to “VIDEO”.
2
Connect the DVI cable to the
DIGITAL INPUT terminal.
DIGITAL INPUT terminal.
3
Connect the other end to the
corresponding terminal on the
DVD player or DTV decoder.
corresponding terminal on the
DVD player or DTV decoder.
• Secure the connectors by tightening the
thumbscrews.
Note
• Select DIGITAL INPUT mode when con-
necting to video equipment with the digi-
tal output terminal. (See page 31.)
tal output terminal. (See page 31.)
• Make sure to turn both the projector and
the video equipment off before switching
the “DIGITAL INPUT TYPE” switch and
connecting.
the “DIGITAL INPUT TYPE” switch and
connecting.
To DIGITAL INPUT
terminal
terminal
DIGITAL INPUT
TYPE switch
TYPE switch
DVD player or
DTV decoder
DTV decoder
To DVI digital output terminal
DVI cable
(sold separately)
(sold separately)
Connecting the Projector to Other Devices
-20
XV_Z200E_E_p13_24.p65
03.10.30, 13:13PM
20
Click on the first or last page to see other XV-Z200E (serv.man32) service manuals if exist.