Sharp XV-Z10E (serv.man28) User Manual / Operation Manual ▷ View online
-19
Connections and Setup
Connecting the Projector to Other Devices
Before Connecting
Note
• Before connecting, be sure to unplug the power cord of the projector from the wall outlet and turn off the
devices to be connected. After making all connections, turn on the projector and then the other devices.
When connecting a computer, be sure that it is the last device to be turned on after all the connections are
made.
When connecting a computer, be sure that it is the last device to be turned on after all the connections are
made.
• Be sure to read the operation manuals of the devices to be connected before making connections.
This projector can be connected to:
Video equipmeent or audio-visual equipment:
■ A VCR or other audio-visual equipment (See page
21.)
■ A DVD player or DTV
*
decoder (See page 22.)
*
DTV is the umbrella term used to describe the new
digital television system in the United States.
A computer using:
■ An RGB cable (commercially available or sold sepa-
rately) (See page 24.)
■ An RS-232C cable (null modem, cross type, commer-
cially available) for controlling the projector (See
page 25.)
page 25.)
Connecting the thumbscrew cables
■ Connect the thumbscrew cable making sure that
it fits correctly into the terminal. Then, firmly se-
cure the connectors by tightening the screws on
both sides of the plug.
cure the connectors by tightening the screws on
both sides of the plug.
XV_Z10E_E_p19_25.p65
03.11.7, 4:15 PM
19
-20
Connecting the Power
Cord
Cord
Plug the supplied power cord into the
AC socket on the rear of the projector.
AC socket on the rear of the projector.
Note
• The projector is put into standby mode by
plugging the power cord into the wall outlet
after first turning the projector off and then
unplugging the power cord from the wall out-
let.
after first turning the projector off and then
unplugging the power cord from the wall out-
let.
Power cord
Supplied
accessory
Connecting the Projector to Other Devices
XV_Z10E_E_p19_25.p65
03.11.7, 4:15 PM
20
-21
Connections and Setup
Connecting to Video Equip-
ment with an S-video Output
Terminal (INPUT 2)
ment with an S-video Output
Terminal (INPUT 2)
Using a commercially available S-video or audio
cable, a VCR or other audio-visual equipment can be
connected to INPUT 2 and AUDIO INPUT terminals.
cable, a VCR or other audio-visual equipment can be
connected to INPUT 2 and AUDIO INPUT terminals.
1
Connect the projector to the video
equipment using an S-video cable
(commercially available).
equipment using an S-video cable
(commercially available).
2
Connect the projector to the video
equipment using a ø3.5 mm
minijack to RCA audio cable
(commercially available).
equipment using a ø3.5 mm
minijack to RCA audio cable
(commercially available).
Note
• The INPUT 2 (S-VIDEO) terminal uses a video
signal system in which the picture is separated
into colour and luminance signals to realise a
higher-quality image. To view a higher-quality
image, use a commercially available S-video
cable to connect the INPUT 2 terminal on the
projector and the S-video output terminal on the
video equipment.
into colour and luminance signals to realise a
higher-quality image. To view a higher-quality
image, use a commercially available S-video
cable to connect the INPUT 2 terminal on the
projector and the S-video output terminal on the
video equipment.
• A ø3.5 mm minijack to RCA audio cable (com-
mercially available) is required for audio input.
Connecting to Video Equip-
ment without an S-video
Output Terminal (INPUT 3)
ment without an S-video
Output Terminal (INPUT 3)
Using a composite video cable or audio cable, a
VCR or other audio-visual equipment can be con-
nected to INPUT 3 and AUDIO INPUT terminals.
VCR or other audio-visual equipment can be con-
nected to INPUT 3 and AUDIO INPUT terminals.
1
Connect the projector to the video
equipment using a composite
video cable.
equipment using a composite
video cable.
2
Connect the projector to the video
equipment using a ø3.5 mm
minijack to RCA audio cable (com-
mercially available).
equipment using a ø3.5 mm
minijack to RCA audio cable (com-
mercially available).
Connecting to Video Equipment
To S-video output
terminal
To audio output
terminal
terminal
To INPUT 2 terminal
To AUDIO INPUT
terminal
terminal
S-video cable
(commercially available)
ø3.5 mm minijack to
RCA audio cable
(commercially
available)
RCA audio cable
(commercially
available)
VCR or other audio-visual equipment
To audio output
terminal
terminal
To AUDIO INPUT
terminal
terminal
ø3.5 mm minijack to
RCA audio cable
(commercially
available)
RCA audio cable
(commercially
available)
VCR or other audio-visual equipment
To video output
terminal
To INPUT 3 terminal
Composite video cable
XV_Z10E_E_p19_25.p65
03.11.7, 4:15 PM
21
-22
3 RCA to 15-pin D-sub cable
(3.0 m)
(3.0 m)
Supplied
accessory
accessory
DVD player or DTV* decoder
To INPUT 1
terminal
3 RCA to 15-pin
D-sub cable
(supplied)
To analog component
output terminal
To audio output
terminal
terminal
To AUDIO INPUT
terminal
terminal
ø3.5 mm minijack to
RCA audio cable
(commercially
available)
RCA audio cable
(commercially
available)
Connecting to Video
Equipment with a
Component Output
Terminal (INPUT 1)
Equipment with a
Component Output
Terminal (INPUT 1)
Use a supplied 3 RCA to 15-pin D-sub cable
when connecting to the INPUT 1 terminal, com-
ponent video equipment such as DVD players
and DTV* decoders.
when connecting to the INPUT 1 terminal, com-
ponent video equipment such as DVD players
and DTV* decoders.
*
DTV is the umbrella term used to describe the
new digital television system in the United
States.
new digital television system in the United
States.
1
Connect the projector to the video
equipment using the 3 RCA to 15-
pin D-sub cable.
equipment using the 3 RCA to 15-
pin D-sub cable.
• Secure the connectors by tightening the
thumbscrews.
2
Connect the projector to the video
equipment using a ø3.5 mm
minijack to RCA audio cable
(commercially available).
equipment using a ø3.5 mm
minijack to RCA audio cable
(commercially available).
Note
• When connecting the projector to the com-
ponent video equipment, set “Signal Type”
on the “Picture” menu to “Component”
on the “Picture” menu to “Component”
(page 44), or press
on the remote
control to select the component input.
• Set “Special Mode” to “480P” for inputting the
525P signal (page 45).
• A ø3.5 mm minijack to RCA audio cable (com-
mercially available) is required for audio input.
Connecting the Projector to Other Devices
XV_Z10E_E_p19_25.p65
03.11.7, 4:15 PM
22
Click on the first or last page to see other XV-Z10E (serv.man28) service manuals if exist.