Sharp XV-Z10000 (serv.man28) User Manual / Operation Manual ▷ View online
Image Projection
Power (ON)
button
button
4
Press
on the remote control
or
on the projector, then
press
or
again while the
confirmation message is dis-
played, to turn off the projec-
tor.
played, to turn off the projec-
tor.
Note
•
If you accidentally pressed
and
do not want to turn off the power,
wait until the confirmation message
disappears.
wait until the confirmation message
disappears.
Info
•
Do not unplug the power cord dur-
ing projection or cooling fan opera-
tion. This can cause damage due
to the rise in internal temperature,
as the cooling fan also stops.
ing projection or cooling fan opera-
tion. This can cause damage due
to the rise in internal temperature,
as the cooling fan also stops.
•
When connected to equipment such
as an amplifier, be sure to turn off
the power to the equipment con-
nected first and then to the projec-
tor.
as an amplifier, be sure to turn off
the power to the equipment con-
nected first and then to the projec-
tor.
Selecting the On-screen
Display Language
Display Language
•
The on-screen display language of the
projector can be set to English, German,
Spanish, Dutch, French, Italian, Swedish,
Portuguese, Chinese, Korean or Japa-
nese.
projector can be set to English, German,
Spanish, Dutch, French, Italian, Swedish,
Portuguese, Chinese, Korean or Japa-
nese.
1
Press
.
•
The menu will be displayed.
2
Press \ or | to select “Lan-
guage”.
guage”.
MENU
button
button
', ", \, |
buttons
buttons
-34
Power (OFF)
button
ENTER button
Basic Operation
-35
3
Press ' or " to select the de-
sired language, and then press
sired language, and then press
.
4
Press
.
•
The desired language will be set as
the on-screen display.
the on-screen display.
*
Keystone Correction and Vertical Size Adjustment
Correcting Trapezoidal
Distortion and Adjust-
ing the Vertical Size of
the Picture
Distortion and Adjust-
ing the Vertical Size of
the Picture
This function allows for Keystone (On-screen
Trapezoidal Distortion) Correction and the
adjustment of the vertical size of the picture.
Trapezoidal Distortion) Correction and the
adjustment of the vertical size of the picture.
Note
•
When the image is projected either from
top or from bottom toward the screen at
an angle, the image becomes distorted
trapezoidally.
The function for correcting trapezoidal dis-
tortion is called Keystone Correction.
top or from bottom toward the screen at
an angle, the image becomes distorted
trapezoidally.
The function for correcting trapezoidal dis-
tortion is called Keystone Correction.
•
The Keystone Correction can be adjusted
up to angle of approximately
up to angle of approximately
±
20 degrees.
•
There are some input signal in which
“KEYSTONE” does not work.
“KEYSTONE” does not work.
1
Press
.
•
Each time
is pressed, the settings
toggles as shown on the right.
2
Press ', ", \ and | to adjust
the Keystone correction.
•
If you want to make more detailed cor-
rections, press
rections, press
to display the test
pattern, and then press '
'
'
'
', "
"
"
"
", \
\
\
\
\ and
|
|
|
|
| to make the adjustments.
Note
•
Since the trapezoidal distortion of the im-
age can be corrected up to an angle of
approximately
age can be corrected up to an angle of
approximately
±
20 degrees, the actual
screen can be diagonally set up to that
angle as well.
angle as well.
•
Press
to cancel Keystone Correction.
•
Straight lines or the edges of images
may appear jagged while adjusting
the image.
may appear jagged while adjusting
the image.
KEYSTONE button
UNDO button
ENTER button
Normal screen
Keystone Correc-
tion screen
tion screen
Compresses
upper side.
upper side.
Compresses
lower side.
lower side.
Test pattern
', ", \, |
buttons
buttons
Vertical size
adjustment screen
adjustment screen
* “V-SIZE” is not dis-
played when the value
of “KEYSTONE” is “0”.
of “KEYSTONE” is “0”.
-36
Basic Operation
-37
Vertical Size Adjustment
The image aspect ratio may change when the lens shift function is
used in combination with the Keystone Correction function. In this
case, adjust the aspect ratio using the vertical size adjustment.
used in combination with the Keystone Correction function. In this
case, adjust the aspect ratio using the vertical size adjustment.
Pressing ' increases the
vertical length of the image.
Press
to reset the
image.
Pressing " decreases
the vertical length of the
image.
Press
to reset the
image.
UNDO button
3
When adjusting vertical size,
pressing
again displays
the vertical size adjustment
menu.
menu.
4
Press "and ' to adjust the
vertical size of the picture, and
press
press
.
•
See below for details about the verti-
cal size screen.
cal size screen.
Click on the first or last page to see other XV-Z10000 (serv.man28) service manuals if exist.