DOWNLOAD Sharp XV-Z10000 (serv.man28) Service Manual ↓ Size: 7.54 MB | Pages: 94 in PDF or view online for FREE

Model
XV-Z10000 (serv.man28)
Pages
94
Size
7.54 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Projector / Chapter 1 - Introduction
File
xv-z10000-sm28.pdf
Date

Sharp XV-Z10000 (serv.man28) User Manual / Operation Manual ▷ View online

-14
Accessories
3 RCA to 15-pin D-sub cable (3.0m)
AN-C3CP
DVI cable (3.0m)
AN-C3DV
RS-232C cable (10.0m)
AN-C10RS (null modem, cross type)
Note
Some of the cables may not be available depending on the region. Please check with your nearest
Sharp Authorised Projector Dealer or Service Centre.
Supplied accessories
Optional accessories
Remote control
Two “AA” size batteries
Power cord
For Europe, except U.K.
(1)
For U.K., Hong Kong and
Singapore
(2)
For Australia and
New Zealand
(3)
Note
Depending on the region, projectors are shipped only one power cord (see above). Use the power cord
that corresponds to the wall outlet in your country.
Video cable
Lens cap (attached)
Operation manuals
 for European 7 languages
 for Chinese, Korean and Arabic
SharpVision Manager operation manual
Terminal cover
CD-ROM
(SharpVision Manager)
DVI to 15-pin
D-sub adaptor
21-pin RCA
conversion adaptor
Connections and Setup
Connections and Setup
-16
Connecting the Projector to Other Devices
Before Connecting
Note
Before connecting, be sure to turn off both the projector and the devices to be connected. After making all
connections, turn on the projector and then the other devices.
When connecting a computer, be sure that it is the last device to be turned on after all the connections are
made.
Be sure to read the operation manuals of the devices to be connected before making connections.
This projector can be connected to:
Video equipment:
■ A VCR, Laser disc player or other video equipment (See page 17.)
■ A DVD player or DTV* decoder (See page 18.)
*DTV is the umbrella term used to describe the new digital television system in the United States.
A computer using:
■ DVI to 15-Pin D-sub adapter (See page 21.)
■ A DVI cable (See page 22.)
■ An RS-232C cable (AN-C10RS) (See page 23.)
Connecting the Power
Cord
Plug in the supplied power cord into
the AC socket on the rear of the pro-
jector.
Power cord
Supplied
accessory
-16
Connections and Setup
-17
Connecting to Video Equipment
S-video cable (commercially available)
Connecting to Video
Equipment Using an
S-video or a Composite
Video Cable
Using an S-video or a composite video cable,
a VCR, laser disc player or other video equip-
ment can be connected to INPUT 3 and INPUT
4 input terminals.
Connect the projector to the video
equipment using an S-video cable
(commercially available) or a com-
posite video cable.
Note
The INPUT 3 (S-VIDEO) terminal uses a
video signal system in which the picture
is separated into colour and luminance
signals to realize a higher-quality image.
To view a higher-quality image, use a com-
mercially available S-video cable to con-
nect the INPUT 3 terminal on the projec-
tor and the S-video output terminal on the
video equipment.
To S-video output terminal
To video output terminal
Composite video cable
VCR or other video equipment
Supplied
accessory
Video Cable
Page of 94
Display

Click on the first or last page to see other XV-Z10000 (serv.man28) service manuals if exist.