DOWNLOAD Sharp XR-10X (serv.man29) Service Manual ↓ Size: 6.16 MB | Pages: 69 in PDF or view online for FREE

Picture

Resize

Image Shift

0

0

SCR - ADJ

PRJ - ADJ

Help

Keystone

Auto Keystone

OSD Display

Background

Setup Guide

PRJ Mode

Language

Front

English

On

Logo

On

Off

Normal

SEL./ADJ.

ENTER

END

8

7

6

5

4

3

2

1

1

1

1

1

1 Setting the Resize Mode

• For details of the Resize mode, see pages 

• You can also press HRESIZE on the remote

control to set the resize mode. (See page 

2

2

2

2

2 Adjusting the Image

You can move the projected image vertically.

Q button

• You cannot set this item when “Resize” is set

to “Normal”.

O button

Menu operation n Page 

*

“Auto Keystone” can be operated only when using XR-20X.

3

3

3

3

3 Keystone Correction

When the image is projected either from the top
or from the bottom towards the screen at an
angle, the image becomes distorted
trapezoidally. The function for correcting trap-
ezoidal distortion is called Keystone Correction.

For Manual Keystone Correction

For Auto Keystone Correction

O or R button

Q or P button

a When using XR-20X

a When using XR-20S, XR-10X or XR-10S
Select “Keystone” on the “SCR-ADJ”
menu and adjust with the slide bar.

• The Keystone Correction can be adjusted up

to an angle of approximately ±13 degrees with
the “Auto Keystone” and up to an angle of
approximately ±13 degrees with the manual
“Keystone” (when “Resize” is set to “Normal”).

 for details of Keystone Correction.

The projector can switch the on-screen display
language among 11 languages.

Selectable items

Front

Ceiling + Front

Rear

Ceiling + Rear

Description

Normal image (Projected from
the front of the screen)

Inverted image (Projected
from the front of the screen
with an inverted projector)

Reversed image (Projected
from the rear of the screen or
with a mirror)

Reversed and inverted image
(Projected with a mirror)

6

6

6

6

6 Selecting the Setup

8

8

8

8

8 Selecting the On-screen

Selectable items

On

Off

Description

Displaying the Setup Guide
when turning the projector on.

Not displaying the Setup
Guide.

7

7

7

7

7 Reversing/Inverting

English
Deutsch
Español
Nederlands
Français
Italiano
Svenska
Português

4

4

4

4

4 Setting On-screen

Menu operation n Page 

Selectable

items

On

Off

Description

All On-screen Displays are displayed.

INPUT/VOLUME/AV MUTE/FREEZE/
AUTO SYNC/RESIZE/PICTURE MODE/
“An invalid button has been pressed.”
are not displayed.

5

5

5

5

5 Selecting the Background

Selectable items

Logo

Blue

None

Description

Sharp logo screen

Blue screen

—

 for details of Projection (PRJ) Mode.

Picture

Auto Search

SCR - ADJ

PRJ - ADJ

Help

Auto Sync

Auto Power Off

System Sound

System Lock

h

On

On

On

On

SEL./ADJ.

ENTER

END

0

Lamp Timer(Life)

100%

Speaker

On

RS-232C

9600 bps

Fan Mode

Normal

1

1

1

1

1 Auto Search Function

This function automatically searches for and
switches to the input mode in which signals are
being received, when the projector is turned on,
or when the INPUT button is pressed.

When “Auto Search” is set to “On”
• If two or more input signals are found, the pro-

jector selects the input source in the order of
INPUT 1 n INPUT 2 n INPUT 3 n INPUT 4
when you press INPUT (P/R) on the projec-
tor.

• While “Auto Search” is set to “On”, press

C INPUT 1,C INPUT 2, D INPUT 3 or
EINPUT 4 on the remote control to select
an input mode other than the input mode se-
lected by the projector.

2

2

2

2

2 Auto Sync (Auto Sync

Menu operation n Page 

• Auto Sync adjustment is also performed by

pressing F AUTO SYNC on the remote con-
trol.

• The Auto Sync adjustment may take some time

to complete, depending on the image of the
computer connected to the projector.

• When the optimum image cannot be achieved

with Auto Sync adjustment, use manual ad-
justments. (See page 

Selectable items

On

Off

Description

Auto Sync adjustment will
occur when the projector is
turned on or when the input
signals are switched, when
connected to a computer.

Auto Sync adjustment is not
automatically performed.

• When the Auto Power Off function is set to

“On”, 5 minutes before the projector enters
standby mode, the message “Enter STANDBY
mode in X min.” will appear on the screen to
indicate the remaining minutes.

Selectable

items

On

Off

Description

When no input signal is detected for
more than 15 minutes, the projector will
automatically enter standby mode.

The Auto Power Off function will be
disabled.

3

3

3

3

3 Auto Power Off

5

5

5

5

5 Speaker Setting

Selectable

items

On

Off

Description

The audio signal is output from the
internal speaker.

The audio signal is not output from the
internal speaker.

4

4

4

4

4 Setting the Confirmation

Selectable

items

On

Off

Description

A confirmation sound is made when
the projector turns on/off.

No confirmation sound is made.

This function prevents unauthorized use of the
projector. Once this function is activated, users
must enter the correct keycode each time the
projector is turned on. We suggest you record
the keycode in a safe place where only au-
thorized users have access.

• If you lose or forget your keycode, contact your

nearest Sharp Authorized Projector Dealer or
Service Center (see page 

). Even if the prod-

uct warranty is valid, the keycode reset will
incur a charge.

• When setting the keycode for the first

time, press R on the projector for four
times.

Setting the System Lock

PRJ - ADJ

Old Code

New Code

Reconfirm

– – – –

– – – –

– – – –

• If you input a wrong keycode, the cursor

returns to the first point of the “Old Code”.

• The preset keycode is 4 R buttons on

the projector. When you press the R but-
ton four times, the keycord input screen
disappears.

8

8

8

8

8 System Lock Function

7

7

7

7

7 Fan Mode Setting

Menu operation n Page 

This function changes the fan rotation speed.

Selectable

items

Normal

High

Description

Suitable for normal environments.

Select this when using the projector at
altitudes of approximately 1,500
meters (4,900 feet) or more.

6

6

6

6

6 Selecting the Transmission

Make sure that both the projector and computer
are set for the same baud rate.

Selectable

items

9600bps

115200bps

Description

Transmission speed is slow.

Transmission speed is rapid.

P
R

9

9

9

9

9 Checking the Lamp Life

You can confirm the cumulative lamp usage time
and the remaining lamp life (percentage).

• It is recommended that the lamp be changed

when the remaining lamp life becomes 5%.

• The lamp life may vary depending on the us-

age condition.

Lamp usage condition

Operated exclusively
with Lamp Setting set to
“Eco +Quiet”

Operated exclusively
with Lamp Setting set to
“Bright”

100%

Approx.
3,000
hours

Approx.
2,000
hours

5%

Approx.
150 hours

Approx.
100 hours

Remaining lamp life

“Life”

a Setting/Changing the keycode

When “Fan Mode” is set to “High”, the fan rotation
speeds up, and the fan noise becomes louder.