Sharp XR-10X (serv.man29) User Manual / Operation Manual ▷ View online
21
Connections
Connections
INPUT Terminals and Connectable Main Equipment
INPUT 1, 2 terminal
■ Connecting the computer. (See page
23
.)
■ Connecting video equipment with compo-
nent output terminal (DVD player, DTV
decoder, DVD recorder with hard disc,
etc.). (See page
decoder, DVD recorder with hard disc,
etc.). (See page
24
.)
INPUT 3 terminal
Connecting video equipment with
S-video output terminal (VCR, DVD
player, etc.). (See page
Connecting video equipment with
S-video output terminal (VCR, DVD
player, etc.). (See page
24
.)
INPUT 4 terminal
Connecting video equipment without S-
video output terminal. (See page
Connecting video equipment without S-
video output terminal. (See page
25
.)
AUDIO (INPUT 1, 2) terminal
Connecting an audio cable
(Shared audio input terminal for
INPUT 1 and 2). (See pages
Connecting an audio cable
(Shared audio input terminal for
INPUT 1 and 2). (See pages
23
and
24
.)
AUDIO (INPUT 3, 4) terminal
Connecting an audio cable
(Shared audio input terminal
for INPUT 3 and 4). (See
pages
Connecting an audio cable
(Shared audio input terminal
for INPUT 3 and 4). (See
pages
24
and
25
.)
COMPUTER-RGB/COMPONENT
OUTPUT terminal
Connecting the monitor when you want
to simultaneously watch the projection
image on the monitor. (See page
OUTPUT terminal
Connecting the monitor when you want
to simultaneously watch the projection
image on the monitor. (See page
25
.)
RS-232C terminal
Connecting the computer to
control the projector. (See
page
Connecting the computer to
control the projector. (See
page
26
.)
AUDIO OUTPUT terminal
Connecting to an amplifier or other
audio equipment with an audio cable
(commercially available) (Shared
audio output terminal for INPUT 1, 2,
3 and 4).
Use an audio cable with ø3.5 mm
minijack plug to connect to this
terminal.
Connecting to an amplifier or other
audio equipment with an audio cable
(commercially available) (Shared
audio output terminal for INPUT 1, 2,
3 and 4).
Use an audio cable with ø3.5 mm
minijack plug to connect to this
terminal.
Rear View
22
Samples of Cables for Connection
Cables for a camera
or a video game
or a video game
Equipment
Input
Signal
Cable
Terminal on the
projector
ø3.5 mm stereo audio cable
(commercially available or available as Sharp
service part QCNWGA038WJPZ)
(commercially available or available as Sharp
service part QCNWGA038WJPZ)
RGB cable (supplied)
S-video cable (commercially available)
Video cable (commercially available)
Computer
Audio-visual
equipment
equipment
Camera/
video game
video game
RGB
video
Computer
audio
S-video
S-video
Compo-
nent
video
Video
Audio
Cables for a camera or a video game/3 RCA
(Component) to 15-pin D-sub cable (optional,
AN-C3CP2)
(Component) to 15-pin D-sub cable (optional,
AN-C3CP2)
ø3.5 mm minijack to RCA audio cable
(commercially available)
(commercially available)
INPUT1, 2
AUDIO INPUT
INPUT3
INPUT4
AUDIO INPUT
INPUT1, 2
INPUT3
Video
Audio
Cables for a camera
or a video game
or a video game
Cables for a camera or a video game/ø3.5
mm minijack to RCA audio cable (commer-
cially available)
mm minijack to RCA audio cable (commer-
cially available)
INPUT4
AUDIO INPUT
3 RCA (Component) to 15-pin D-sub cable
(optional, AN-C3CP2)
(optional, AN-C3CP2)
Compo-
nent
video
INPUT1, 2
• For more details of connection and cables, refer to the operation manual of the connecting equipment.
• You may need other cables or connectors not listed below.
• You may need other cables or connectors not listed below.
RCA adaptor plug
(commercially available)
(commercially available)
RCA adaptor plug
(commercially available)
(commercially available)
or
or connect directly to
AUDIO (INPUT 3, 4).
AUDIO (INPUT 3, 4).
or
or
23
Connections
Connecting to a Computer
To RGB output terminal
To audio output terminal
RGB Cable
* ø3.5 mm stereo or
mono audio cable
(commercially
available or
available as Sharp
service part
QCNWGA038WJPZ)
mono audio cable
(commercially
available or
available as Sharp
service part
QCNWGA038WJPZ)
RGB Cable
Before connecting, ensure that the power cord of the projector is unplugged from the AC
outlet and turn off the devices to be connected. After making all connections, turn on the
projector and then the other devices. When connecting a computer, ensure that it is the last
device to be turned on after all the connections are made.
outlet and turn off the devices to be connected. After making all connections, turn on the
projector and then the other devices. When connecting a computer, ensure that it is the last
device to be turned on after all the connections are made.
Ensure that you have read the operation manuals of the devices to be connected before making
connections.
connections.
* When using the ø3.5 mm mono audio cable, the volume level will be half of
when using the ø3.5 mm stereo audio cable.
• See page
58
“Computer Compatibility Chart” for a list of computer signals compatible with the projec-
tor. Use with computer signals other than those listed may cause some of the functions to not work.
• A Macintosh adaptor may be required for use with some Macintosh computers. Contact your near-
est Macintosh Dealer.
• Depending on the computer you are using, an image may not be projected unless the
computer’s external output port is switched on. (e.g. Press “Fn” and “F5” keys simultaneously
when using a SHARP notebook computer). Refer to the specific instructions in your computer's
operation manual to enable your computer’s external output port.
when using a SHARP notebook computer). Refer to the specific instructions in your computer's
operation manual to enable your computer’s external output port.
Note
To INPUT1 terminal
To AUDIO
(INPUT1, 2)
terminal
Supplied
accessory
Computer
24
L
R
Connecting to Video Equipment
The projector is equipped with input terminals that support component, S-video, and video signals.
See the illustration below to connect with the audio-visual equipment.
The image quality is highest in the order of the component signal, the S-video signal and the video
signal. If your audio-visual equipment has a component output terminal, use the COMPUTER/
COMPONENT terminal (INPUT1 or INPUT 2) on the projector for video connection.
See the illustration below to connect with the audio-visual equipment.
The image quality is highest in the order of the component signal, the S-video signal and the video
signal. If your audio-visual equipment has a component output terminal, use the COMPUTER/
COMPONENT terminal (INPUT1 or INPUT 2) on the projector for video connection.
When using an S-video cable (INPUT3)
To S-video output terminal
To audio output terminal
S-video cable
(commercially available)
(commercially available)
RCA audio cable (com-
mercially available)
mercially available)
When using a 3 RCA (Component) to 15-pin D-sub cable (INPUT1 or INPUT2)
3 RCA (Component)
to 15-pin D-sub cable
(optional: AN-C3CP2)
to 15-pin D-sub cable
(optional: AN-C3CP2)
To AUDIO
(INPUT1, 2)
terminal
To audio output terminal
ø3.5 mm minijack to RCA
audio cable (commercially
available)
audio cable (commercially
available)
To component output (Y, C
B
/P
B
, C
R
/P
R
) terminal
To INPUT1
terminal
terminal
To AUDIO
(INPUT3, 4)
terminal
To INPUT3
terminal
terminal
DVD, etc.
DVD, etc.
Click on the first or last page to see other XR-10X (serv.man29) service manuals if exist.