Sharp XG-XV2E (serv.man2) Service Manual ▷ View online
45
XG-XV2E/M/A
TROUBLE SHOOTING TABLE
(Continued)
Yes
Checking the output PWB unit
Are there signal inputs at
P1404, P1405 and SC1501?
Are voltages applied to EA and
EB connectors?
P1404, P1405 and SC1501?
Are voltages applied to EA and
EB connectors?
Yes
No
No
No
Check IC1109, IC1209,
IC1309 and their peripheral
circuits.
IC1309 and their peripheral
circuits.
Are there signal outputs at pins
(30) and (40) of IC1109,
IC1209 and IC1309?
(30) and (40) of IC1109,
IC1209 and IC1309?
Yes
No
Check the switching circuit of
IC1104, IC1204, IC1304 and
their peripheral circuits, as well
as the amplifier circuit of
IC1102, IC1202 and IC1302
and their peripheral circuits.
IC1104, IC1204, IC1304 and
their peripheral circuits, as well
as the amplifier circuit of
IC1102, IC1202 and IC1302
and their peripheral circuits.
Are there signal inputs at pin
(16) of IC1111, IC1110,
IC1210, IC1211, IC1310 and
IC1311?
(16) of IC1111, IC1110,
IC1210, IC1211, IC1310 and
IC1311?
Yes
No
Check the input and output
signals at IC1106, IC1206 and
IC1306. Check also IC1110,
IC1111, IC1210, IC1211,
IC1310, IC1311, and their
peripheral circuits.
signals at IC1106, IC1206 and
IC1306. Check also IC1110,
IC1111, IC1210, IC1211,
IC1310, IC1311, and their
peripheral circuits.
Are there signal outputs at pins
(23), (25), (27), (33), (35) and
(37) of IC1110, IC1111,
IC1210, IC1211, IC1310 and
IC1311?
(23), (25), (27), (33), (35) and
(37) of IC1110, IC1111,
IC1210, IC1211, IC1310 and
IC1311?
Yes
Yes
No
If there is no signal input at
pins (15) and (30) of
SC1101, SC1102 and
SC1103, check IC5509,
IC5514, and their
peripheral circuits.
pins (15) and (30) of
SC1101, SC1102 and
SC1103, check IC5509,
IC5514, and their
peripheral circuits.
No
If there is no signal input at
pins (1) and (31) of SC1101,
SC1102 and SC1103, check
the switching circuit and
amplifier circuit of IC1112,
IC1113, IC1212, IC1213 and
IC1313, and their peripheral
circuits.
pins (1) and (31) of SC1101,
SC1102 and SC1103, check
the switching circuit and
amplifier circuit of IC1112,
IC1113, IC1212, IC1213 and
IC1313, and their peripheral
circuits.
Are there signal inputs at
SC1101, SC1201 and
SC1301?
SC1101, SC1201 and
SC1301?
Check IC1406, IC1407,
IC1408 and their
peripheral circuits.
IC1408 and their
peripheral circuits.
Check the R, G and B panels.
Check the power unit circuit.
Go to "Checking the clock
circuit and its peripheral
circuits".
circuit and its peripheral
circuits".
Go to "Checking the PWB
performance".
performance".
46
XG-XV2E/M/A
TROUBLE SHOOTING TABLE
(Continued)
No audio output
Yes
No
Check the input, the switching circuit
of IC6001 and IC6002, and their
peripheral circuits.
of IC6001 and IC6002, and their
peripheral circuits.
Are there audio signal outputs at pins
(5) and (27) of SC6001?
(5) and (27) of SC6001?
Yes
No
Check the amplifier of IC301 and
IC302 and their peripheral circuits,
the IC303 control voltage, the P1501
connectors, etc.
IC302 and their peripheral circuits,
the IC303 control voltage, the P1501
connectors, etc.
Are there audio signal outputs at pins
(1) and (2) of P1403?
(1) and (2) of P1403?
Yes
No
Check IC7301 and its peripheral
circuits.
circuits.
Are there audio signal outputs at pins
(4) and (6) of IC7301?
(4) and (6) of IC7301?
If the voltage at pin (7) of IC7301 is
not as specified, check Q5501,
Q5502 and their peripheral circuits.
not as specified, check Q5501,
Q5502 and their peripheral circuits.
Check IC7301 and its peripheral
circuits, and the SP connectors and
speakers.
circuits, and the SP connectors and
speakers.
47
XG-XV2E/M/A
TROUBLE SHOOTING TABLE
(Continued)
Lamp does not light up
No
Yes
Replace the lamp. Does the new
lamp light up?
lamp light up?
Lamp was defective.
Yes
Yes
Yes
No
No
Is voltage of over 200V supplied
across C1701?
across C1701?
Is F701 blown out?
Yes
No
Is voltage of over 12V supplied
across C722?
across C722?
Replace F701, take out JW lead
and turn on the power. Does the
LED lights up in green?
and turn on the power. Does the
LED lights up in green?
Yes
Replace F1701.
Is F1701 open?
Q1701 or Q1702 defective.
Replace it.
Replace it.
No
Check IC2001.
Yes
Is voltage of over 3V supplied to
pins (1) thru (4) of EB connector?
pins (1) thru (4) of EB connector?
Power unit in trouble. Check the
output pins of EA, EB and EC
connectors for short-circuit or
voltage drop.
output pins of EA, EB and EC
connectors for short-circuit or
voltage drop.
No
Q1707 or PC1702 defective.
Replace it.
Replace it.
Yes
Is voltage of over 1V supplied to
pins (4) thru (7) of CN101?
pins (4) thru (7) of CN101?
Q701 defective. Replace it.
Replace the sub PWB or check its
internal elements.
internal elements.
No
No
Checking the throughout circuit
Yes
No
Digital output not acceptable.
Yes
No
Are LCP and monitor interconnected
with an appropriate cable?
with an appropriate cable?
Use an appropriate cable.
Yes
No
Are LCP and monitor in sync?
IC3003, IC3004 or IC3005 or their
peripheral circuits in trouble.
peripheral circuits in trouble.
IC3001 or its peripheral circuits in
trouble.
trouble.
Is analog output coming from PC?
47
XG-XV2E/M/A
TROUBLE SHOOTING TABLE
(Continued)
Lamp does not light up
No
Yes
Replace the lamp. Does the new
lamp light up?
lamp light up?
Lamp was defective.
Yes
Yes
Yes
No
No
Is voltage of over 200V supplied
across C1701?
across C1701?
Is F701 blown out?
Yes
No
Is voltage of over 12V supplied
across C722?
across C722?
Replace F701, take out JW lead
and turn on the power. Does the
LED lights up in green?
and turn on the power. Does the
LED lights up in green?
Yes
Replace F1701.
Is F1701 open?
Q1701 or Q1702 defective.
Replace it.
Replace it.
No
Check IC2001.
Yes
Is voltage of over 3V supplied to
pins (1) thru (4) of EB connector?
pins (1) thru (4) of EB connector?
Power unit in trouble. Check the
output pins of EA, EB and EC
connectors for short-circuit or
voltage drop.
output pins of EA, EB and EC
connectors for short-circuit or
voltage drop.
No
Q1707 or PC1702 defective.
Replace it.
Replace it.
Yes
Is voltage of over 1V supplied to
pins (4) thru (7) of CN101?
pins (4) thru (7) of CN101?
Q701 defective. Replace it.
Replace the sub PWB or check its
internal elements.
internal elements.
No
No
Checking the throughout circuit
Yes
No
Digital output not acceptable.
Yes
No
Are LCP and monitor interconnected
with an appropriate cable?
with an appropriate cable?
Use an appropriate cable.
Yes
No
Are LCP and monitor in sync?
IC3003, IC3004 or IC3005 or their
peripheral circuits in trouble.
peripheral circuits in trouble.
IC3001 or its peripheral circuits in
trouble.
trouble.
Is analog output coming from PC?