DOWNLOAD Sharp XG-PH50X (serv.man18) Service Manual ↓ Size: 10.35 MB | Pages: 109 in PDF or view online for FREE

Model
XG-PH50X (serv.man18)
Pages
109
Size
10.35 MB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Projector
File
xg-ph50x-sm18.pdf
Date
PREV: Sharp XG-PH50X (serv.man17) Service Manual / Parts Guide

Sharp XG-PH50X (serv.man18) User Manual / Operation Manual ▷ View online

Useful Features
85
Shortcut to Make Projector
Stack Settings
Normally, settings via web browser are required for
the stack projection. You can skip the settings via
web browser by using “Pair Stack”, only when you
use the two projectors for the stack projection.
Menu operation 
 Page 56
Note
• Before setting “Pair Stack”, select “Master” or
“Slave” on “Stack Setting”.
Example: “Options (2)” screen menu
1
Select “Pair Stack” on the “Option
(2)” menu, and then press 
 .
• The confirmation screen will be displayed.
2
Select “OK”, and then press  
 .
• The network settings of the projector will
change as shown below.
Locking the Operation But-
tons on the Projector
This function can be used to lock the use of cer-
tain operation buttons on the projector.
Menu operation 
 Page 58
Example: “Options (2)” screen menu
Description of Keylock Level
 
Note
• When a password has been set, and “Keylock
Level” is selected, the password input box will
be displayed.
Description
All operation buttons are functional.
Only INPUT/VOLUME buttons on the
projector are available.
All operation buttons on the projector
are unavailable.
Selectable items
Normal
Level A
Level B
Master
Slave
IP Address
192.168.150.2
192.168.150.3
Subnet Mask
255.255.255.0
255.255.255.0
Default Gateway
0.0.0.0
0.0.0.0
User Name
(Reset)
(Reset)
Password
(Reset)
(Reset)
Data Port
10002
10002
XG-PH50X_Print_E_P82_89.p65
04.11.17, 19:31
85
86
Helpful Functions Set during Installation (“Options (2)” menu)
Selecting the Transmis-
sion Speed (RS-232C)
Make sure that both the projector and computer
are set for the same baud rate.
Menu operation 
 Page 58
Example: “Options (2)” screen menu
Description of RS-232C
Note
• Refer to the “SETUP GUIDE” contained on the
supplied CD-ROM for RS-232C Specifications
and Command Settings.
• Refer to the computer’s operation manual for
instructions for setting the computer’s baud rate.
Description
Transmission speed is slow.
Transmission speed is rapid.
Selectable items
9600 bps
38400 bps
115200 bps
Bypassing Unused Input
Selections
This function allows you to skip the input mode
that you rarely use. You can skip the input modes
when pressing INPUT 1, 2, 3 button or INPUT 4, 5
button on the projector.
Menu operation 
 Page 58
Example: “Options (2)” screen menu
Description of Set Inputs
Selectable items
Description
ON
Sets the INPUT 1—5 mode select-
able respectively.
OFF
Sets the INPUT 1—5 mode unavail-
able respectively.
Input 1—5
XG-PH50X_Print_E_P82_89.p65
04.11.17, 19:31
86
Useful Features
87
Monitor Output Settings
When the Monitor Out has been set to “Enable”,
the monitor output is activated and power is con-
sumed even in the standby mode. It is recom-
mended that the Monitor Out be set to “Disable”
when it is not connected. This reduces power
consumption when the projector is in the standby
mode.
Menu operation 
 Page 58
Example: “Options (2)” screen menu
Description of Monitor Out
Description
The monitor output function is activated
even if the projector is in standby mode.
The monitor output function is switched off
when the projector is in standby mode.
Selectable items
Enable
Disable
LAN/RS232C Setting
When the LAN/RS232C has been set to “Enable”,
the LAN/RS232C is activated and power is con-
sumed even in the standby mode. It is recom-
mended that the LAN/RS232C be set to “Disable”
when it is not connected.  This reduces power
consumption when the projector is in the standby
mode.
Menu operation 
 Page 58
Example: “Options (2)” screen menu
Description of LAN/RS232C
Note
• When you want to control the projector using
the LAN/RS232C function, select “Enable.”
Description
The LAN/RS232C function is activated
even if the projector is in standby mode.
The LAN/RS232C function is switched off
when the projector is in standby mode.
Selectable items
Enable
Disable
XG-PH50X_Print_E_P82_89.p65
04.11.17, 20:23
87
88
Returning to the Default
Settings
This function allows you to initialize the settings
you have made in the projector.
Menu operation 
 Page 56
Example: “Options (2)” screen menu
Note
About the network settings
• “IP Address”, “Subnet Mask”, “Default Gateway”
and other network setting items are initialized.
The following items or menu cannot be initialized.
• “C. M. S.”
“Lightness”, “Chroma” and “Hue” respectively
saved for Custom 1-3 on the “C.M.S.” menu.
• “Fine Sync” menu
Special Modes
• “Options (1)” menu
Lamp Timer (Life)
System Lock
• “Language” menu
• Image stored using “Image Capture”
Item Only for the Projector
Repair
Only the service centers use the menu. Do not
use the menu.
Example: “Options (2)” screen menu
Helpful Functions Set during Installation (“Options (2)” menu)
XG-PH50X_Print_E_P82_89.p65
04.11.17, 19:31
88
Page of 109
Display

Click on the first or last page to see other XG-PH50X (serv.man18) service manuals if exist.

RANDOM: