Sharp XG-PH50X (serv.man18) User Manual / Operation Manual ▷ View online
Useful Features
81
When the system lock is set
If you have set the system lock, enter the
keycode and follow the procedure below to
release the system lock.
keycode and follow the procedure below to
release the system lock.
▼Input screen for keycode
Note
• When System Lock is set, the keycode input
screen appears after the power is turned on.
• If no keycode is entered, the image will not be
displayed, even if the projector receives the in-
put signal.
put signal.
1
Press
on the remote control or
on the projector to turn on the
projector.
2
When the keycode input screen ap-
pears, enter the right keycode to
start projection.
pears, enter the right keycode to
start projection.
Note
• System Lock function recognizes each but-
ton on the remote control or on the projector
as an individual button, even if they share
the same button name. If you set the keycode
with the buttons on the projector, use only
those buttons on the projector. If you set the
keycode with the buttons on the remote con-
trol, use only those buttons on the remote
control.
as an individual button, even if they share
the same button name. If you set the keycode
with the buttons on the projector, use only
those buttons on the projector. If you set the
keycode with the buttons on the remote con-
trol, use only those buttons on the remote
control.
XG-PH50X_Print_E_P72_81.p65
04.11.18, 10:33
81
82
Helpful Functions Set during Installation (“Options (2)” menu)
Setting a Password
•••••
There is no factory preset for the password, so
the “Options (2)” menu is enabled.
the “Options (2)” menu is enabled.
•••••
If you do not want others to operate the “Op-
tions (2)” menu, set a password.
tions (2)” menu, set a password.
Menu operation
Page 58
Example: “Options (2)” screen menu
1
Select “Password” from the “Op-
tions (2)” menu, and press |
tions (2)” menu, and press |
|
|
|
|.
2
Press '
'
'
'
' or "
"
"
"
" to set the first digit in
“New Password” and then press |
|
|
|
|.
3
Enter the remaining 3 digits and
press
press
.
4
Enter the same password in “Re-
confirm” and press
confirm” and press
.
Info
• The password must be entered to use the
“Options (2)” menu when a password has
been set.
been set.
Changing the password
1
Press '
'
'
'
', "
"
"
"
" and |
|
|
|
| to enter the
password in “Old Password” and
press
press
.
2
Press '
'
'
'
', "
"
"
"
" and |
|
|
|
| to set the new
password in “New Password” and
press
press
.
3
Enter the same 4-digit password in
“Reconfirm” and press
“Reconfirm” and press
.
Note
• If you do not want to set a password, leave the
fields blank in steps 2 and 3 and press
.
• To cancel the password settings, press
.
If You Forget Your Password
If you forget the password, delete it using the fol-
lowing procedure and set a new password.
lowing procedure and set a new password.
Press
.
XG-PH50X_Print_E_P82_89.p65
04.11.17, 19:31
82
Useful Features
83
Checking the Lamp Life
Status
Status
You can confirm the cumulative lamp usage time
and the remaining lamp life (percentage).
and the remaining lamp life (percentage).
Menu operation
Page 56
Example: “Options (2)” screen menu
Description of Lamp Timer (Life)
Note
• It is recommended that the lamp be changed
when the remaining lamp life becomes 5%.
• The table above indicates rough estimates in the
case of using only in each mode shown.
• Remaining lamp life changes within the range of
the values shown depending on the frequency at
which “Eco Mode” is switched to “ON” and “OFF”.
(See page 78.)
which “Eco Mode” is switched to “ON” and “OFF”.
(See page 78.)
• The lamp life may vary depending on the usage
condition.
Lamp usage condition
Operated exclusively
while “Eco Mode” is
“ON”.
Operated exclusively
while “Eco Mode” is
“OFF”.
while “Eco Mode” is
“ON”.
Operated exclusively
while “Eco Mode” is
“OFF”.
Remaining lamp life
100%
5%
Approx.
Approx.
3,000 hours
150 hours
Approx.
Approx.
2,000 hours
100 hours
Setting the Lamp Mode
This function allows you to select the usage of
the two lamps installed in the projector.
the two lamps installed in the projector.
Menu operation
Page 58
Example: “Options (2)” screen menu
Description of Lamp Mode
Description
Both lamps are used for greater
brightness.
The lamp 1 is used.
When the lamp 1 burns out, the lamp 2
automatically switches in use.
The lamp 2 is used.
When the lamp 2 burns out, the lamp 1
automatically switches in use.
Both lamps are used alternately for
certain periods.
Both lamps are used alternately for
certain periods.
Selectable items
Both Lamps
Lamp 1 Only
Lamp 2 Only
Equal Use
XG-PH50X_Print_E_P82_89.p65
04.11.17, 19:31
83
84
Reversing/Inverting Pro-
jected Images
jected Images
This projector is equipped with a reverse/invert
image function that allows you to reverse or in-
vert the projected image for various applications.
image function that allows you to reverse or in-
vert the projected image for various applications.
Menu operation
Page 58
Example: “Options (2)” screen menu
Description of PRJ Modes
Note
• This function is used for the reversed image and
ceiling-mount setups. (See page 23.)
Description
Normal image
Inverted image
Reversed image
Reversed and inverted image
Selectable items
Front
Ceiling + Front
Rear
Ceiling + Rear
Controlling Multiple Projectors
with the One Remote Control
with the One Remote Control
This function allows you to control multiple pro-
jectors with the one remote control during the
stack projection or the video wall projection.
When using this function, connect the projectors
with LAN cables and assign a projector as the
master and the other projectors as the slaves.
jectors with the one remote control during the
stack projection or the video wall projection.
When using this function, connect the projectors
with LAN cables and assign a projector as the
master and the other projectors as the slaves.
See
page 35 for connecting LAN cables.
Menu operation
Page 58
Example: “Options (2)” screen menu
Description of Stack Setting
Note
• When controlling multiple projectors with the one
remote control, settings via web browser are
required. Refer to the “SETUP GUIDE” con-
tained on the supplied CD-ROM for details.
required. Refer to the “SETUP GUIDE” con-
tained on the supplied CD-ROM for details.
• Only when controlling two projectors with the
one remote control, using “Pair Stack” allows
you to skip settings via web browser. (See page
85.)
you to skip settings via web browser. (See page
85.)
• When “Slave” is selected on “Stack Setting”, the
slave projector cannot be controlled with the
remote control.
To control the slave projector with the remote
control, connect the remote control to the pro-
jector. (See page 18.)
remote control.
To control the slave projector with the remote
control, connect the remote control to the pro-
jector. (See page 18.)
Helpful Functions Set during Installation (“Options (2)” menu)
Description
The stack setting is not available.
Set the projector as the master.
Set the projector as the slave.
Selectable items
Normal
Master
Slave
XG-PH50X_Print_E_P82_89.p65
04.11.17, 19:31
84
Click on the first or last page to see other XG-PH50X (serv.man18) service manuals if exist.