Sharp XG-PH50X (serv.man18) User Manual / Operation Manual ▷ View online
Useful Features
69
Special Mode Setting
Ordinarily, the type of input signal is detected and
the correct resolution mode is automatically se-
lected. However, for some signals, the optimal
resolution mode in “Special Modes” on the “Fine
Sync” menu may need to be selected to match
the computer display mode.
the correct resolution mode is automatically se-
lected. However, for some signals, the optimal
resolution mode in “Special Modes” on the “Fine
Sync” menu may need to be selected to match
the computer display mode.
Menu operation
Page 58
Example: “Fine Sync” screen menu for
INPUT 1 (RGB) mode
Note
• If your computer displays patterns which repeat
every other line (horizontal stripes), flickering
may occur which makes the image hard to see.
may occur which makes the image hard to see.
• See “Checking the Input Signal” on page 68 for
information on the currently selected input sig-
nal.
nal.
Selecting Adjustment Set-
tings
tings
Adjustment settings stored in the projector can
be easily accessed.
be easily accessed.
Menu operation
Page 58
Example: “Fine Sync” screen menu for
INPUT 1 (RGB) mode
Note
• If a memory has not been set, a resolution and
frequency setting will not be displayed.
• When selecting a stored adjustment setting with
“Select Setting”, you can set the projector in the
stored adjustments.
stored adjustments.
XG-PH50X_Print_E_P56_71.p65
04.11.18, 15:25
69
70
Auto Sync Adjustment
Used to automatically adjust a computer image.
Menu operation
Page 58
Example: “Fine Sync” screen menu for
INPUT 1 (RGB) mode
Description of Auto Sync Adjustment
Note
• Auto Sync adjustment is also performed by
pressing
on the projector or
on the
remote control.
• The Auto Sync adjustment may take some time
to complete, depending on the image of the
computer connected to the projector.
computer connected to the projector.
• When the optimum image cannot be achieved
with Auto Sync adjustment, use manual adjust-
ments. (See page 68.)
ments. (See page 68.)
• When
is pressed while “Auto Sync” is “OFF”
or “High Speed”, Auto Sync will be executed in
“High Speed” mode. If the button is pressed
again within one minute, Auto Sync will be ex-
ecuted in “Normal” mode.
“High Speed” mode. If the button is pressed
again within one minute, Auto Sync will be ex-
ecuted in “Normal” mode.
Checking the Input Signal
Menu operation
Page 56
Example: “Fine Sync” screen menu for
INPUT 1 (RGB) mode
Note
• The projector will display the number of scanned
lines available from audio-visual equipment
such as a DVD player or Digital Video.
such as a DVD player or Digital Video.
• The projector will display the resolution when
connecting the computer.
Selectable items
OFF
Normal
High Speed
Description
Auto Sync adjustment is not automati-
cally performed.
Auto Sync adjustment will occur when
the projector is turned on or when the
input signals are switched, when
connected to a computer.
“Normal” takes more time than “High
Speed” for more accurate Auto Sync
adjustment.
cally performed.
Auto Sync adjustment will occur when
the projector is turned on or when the
input signals are switched, when
connected to a computer.
“Normal” takes more time than “High
Speed” for more accurate Auto Sync
adjustment.
Computer Image Adjustment (“Fine Sync” menu)
XG-PH50X_Print_E_P56_71.p65
04.11.18, 10:28
70
Useful Features
71
Auto Sync Display Function
Used to set the display during Auto Sync.
Menu operation
Page 56
Example: “Fine Sync” screen menu for
INPUT 1 (RGB) mode
Description of Auto Sync Display
Description
The image set as a background image
is projected. See page 77.
The computer image being adjusted is
displayed.
is projected. See page 77.
The computer image being adjusted is
displayed.
Selectable items
—
XG-PH50X_Print_E_P56_71.p65
04.11.18, 10:28
71
72
You can adjust the projector’s audio to your preferences using the “Audio” menu.
Audio Adjustment (“Audio” menu)
Adjusting the Audio
This function allows you to adjust the projector’s
audio.
audio.
Menu operation
Page 56
Example: “Audio” screen menu
Description of Adjustment Items
Selectable items
Press \
Press |
Note
• To reset all adjustment items, select “Reset” and
press
.
Increased audio from
the right speaker
For stronger treble
For stronger bass
the right speaker
For stronger treble
For stronger bass
Balance
Treble
Bass
Bass
Increased audio from
the left speaker
For weaker treble
For weaker bass
the left speaker
For weaker treble
For weaker bass
Setting the Audio Output Type
This function determines whether the audio level
output from the AUDIO OUTPUT terminal is fixed
or variable by linking with VOLUME.
output from the AUDIO OUTPUT terminal is fixed
or variable by linking with VOLUME.
Menu operation
Page 58
Example: “Audio” screen menu
Description of Audio Out Settings
Info
• When “Audio Out” has been set to “VAO”, first make
sure to lower the volume of the projector before turn-
ing the power on or off and when switching the input.
ing the power on or off and when switching the input.
Note
When the projector is connected to audio equip-
ment:
• It is recommended that “FAO” be selected on “Audio
ment:
• It is recommended that “FAO” be selected on “Audio
Out”. Because the audio signal from the audio equip-
ment does not vary in strength with the volume level
of the projector, you can enjoy better sound.
ment does not vary in strength with the volume level
of the projector, you can enjoy better sound.
• When “FAO” be selected on “Audio Out”, video and
audio may not synchronize.
- When connecting audio equipment that has a func-
- When connecting audio equipment that has a func-
tion for adjusting audio delay time, adjust the de-
lay time for synchronizing video and audio.
lay time for synchronizing video and audio.
- When the audio equipment does not have such a
function and the unsynchronized video and audio
bothers you, select “VAO” on “Audio Out”. Select-
ing “VAO” synchronizes video and audio automati-
cally.
bothers you, select “VAO” on “Audio Out”. Select-
ing “VAO” synchronizes video and audio automati-
cally.
Description
Audio output that does not vary in
strength with the volume level of the
source projector.
Audio output that varies in strength with
the volume level of the source projec-
tor.
strength with the volume level of the
source projector.
Audio output that varies in strength with
the volume level of the source projec-
tor.
Selectable items
FAO
(Fixed Audio
Output)
VAO
(Variable
Audio Output)
FAO
(Fixed Audio
Output)
VAO
(Variable
Audio Output)
XG-PH50X_Print_E_P72_81.p65
04.11.17, 19:26
72
Click on the first or last page to see other XG-PH50X (serv.man18) service manuals if exist.