DOWNLOAD Sharp XG-P25XE (serv.man38) Service Manual ↓ Size: 9.62 MB | Pages: 82 in PDF or view online for FREE

This projector’s audio is factory preset to standard settings. However, you can adjust it to suit your own
preferences by adjusting the following audio settings. See page 

 for the procedure details.

ß 

Increased audio from the right speaker

For stronger treble

For stronger bass

© 

Increased audio from the left speaker

For weaker treble

For weaker bass

All audio adjustment items are returned to the factory preset settings.

• To reset all adjustment items, select “Reset” on the “Audio” menu screen and press

ENTER.

FAO (Fixed audio output): Audio output that does not vary in strength with

the volume level of the source projector.

VAO (Variable audio output): Audio output that varies in strength with the

volume level of the source projector.

Switching the built-in speakers on the projector ON/OFF.

Picture in Picture function allows you to display two pictures on the same screen. You can display the
image input from INPUT 4 or 5 as an inset picture overlapping the main picture input from INPUT 1, 2 or
3.  See page 

 for the procedure details.

Digital Noise Reduction (DNR) provides high quality images with minimal dot crawl and cross color
noise. See page 

 for the procedure details.

• If the image is clear, select “

” to prevent any blurring.

• The image from INPUT 1, 2 or 3 is displayed as the main picture and the image from INPUT 4 or 5 is displayed as the inset picture.
• The last displayed image from INPUT 4 or 5 is displayed as the inset picture.

For example, when you want to display the image from INPUT 4 as the inset picture, select INPUT 4, then select the main picture, and
then select “Pict in Pict”.

• Inset picture can only be displayed in video signal of NTSC/PAL/SECAM.
• When selecting the image for the inset picture, only the images being input will be displayed.
• The audio of the inset picture will come out of the projector’s speakers.
• Picture in Picture does not work in case of the following RGB signals.

UXGA signal image/SXGA+ signal image/Interlaced signal/DTV (480P/580P/720P/1035I/1080I)

• You can only use the following functions while in Picture in Picture mode.

FREEZE: Works for the inset picture only.

0

1996

1997

1998

1999

50

100

C

150

B

200

A

250

300

Press ß to select “

” to display an inset picture (Factory preset to INPUT 4).

Press ß/©/∂/ƒ to move the inset picture to one of four preset positions.

• When the system mode is set to “Auto”, you may not receive a clear picture due to signal differences. Should this occur,

switch to the video system of the source signal.

• AUTO cannot be set for PAL-M and PAL-N input signals. Select “PAL-M” or “PAL-N” in “Video System” menu for PAL-M and

PAL-N input signals.

The video input system mode is preset to “Auto”; however, it can be changed to a specific system mode
if the selected system mode is not compatible with the connected audiovisual equipment.  See page

 for the procedure details.

All On-screen Display are displayed.

Input/Custom/Freeze/Enlarge/Auto sync/Volume/Mute/
Black screen functions are not displayed.

All On-screen Display are not displayed (except Menu/
Lens functions and warning display (Power off/Temp./
Lamp function etc.)).

This function allows you to turn on or off the on-screen messages that appear during input select.
See page 

 for the procedure details.

SHARP default image

User customized image (e.g. company logo)

Blue screen

Black screen

• By selecting “Custom”, the projector can display a custom image (e.g. your company logo) as the background image. The

custom image must be a 256-color BMP file with a picture size no larger than 1,024 

⳯ 768 pixels. Please see the Sharp

Advanced Presentation Software operation manual on the CD-ROM for how to save (or change) a custom image.

• By selecting “Custom”, the projector can display a custom image (e.g. your company logo) as the startup image. The

custom image must be a 256-color BMP file with a picture size no larger than  1,024 

⳯ 768 pixels. Please see the Sharp

Advanced Presentation Software operation manual on the CD-ROM for how to save (or change) a custom image.

This function allows you to select the image displayed when no signal is being sent to the projector. See
page  

 for the procedure details.

This function allows you to specify the image to be displayed upon the projector’s startup.
A custom image (e.g. your company logo) can be uploaded to the projector via an RS-232C cable. See
page 

 in this operation manual, and also the supplied Sharp Advanced Presentation Software

operation manual on the CD-ROM for detailed instructions. See page  

 for the procedure details.

SHARP default image

User customized image (e.g. company logo)

Black screen