Sharp XG-P25XE (serv.man38) User Manual / Operation Manual ▷ View online
E-30
Setup & Connections
Rear Projection
• Place a translucent screen between the projector and
the audience.
• Use the projector’s menu system to reverse the
projected image. (See page
51
for use of this
function.)
• Optimal image quality can be achieved when the projector
is positioned perpendicular to the screen with all feet flat
and level.
and level.
Projection Using a Mirror
• When the distance between the projector and screen
is not sufficient for normal rear projection, you can
use a mirror to reflect the image onto the screen.
use a mirror to reflect the image onto the screen.
• Place a mirror (normal flat type) in front of the lens.
• Project the normal image onto the mirror.
• The image reflected from the mirror is projected onto
• Project the normal image onto the mirror.
• The image reflected from the mirror is projected onto
the translucent screen.
CAUTION
• When using a mirror, be sure to carefully position both the
projector and the mirror so the light does not shine into the
eyes of the audience.
eyes of the audience.
• It is recommended that you use the optional Sharp
ceiling-mount bracket for this installation.
• Before mounting the projector, contact your nearest
Sharp Authorized LCD Projector Dealer or Service
Center to obtain the recommended ceiling-mount
bracket (sold separately). (AN-XGCM61 ceiling-mount
bracket and its AN-EP101AP extension tube (for
U.S.A.), or AN-NV6T ceiling-mount bracket and its AN-
TK201/AN-TK202 extension tubes (for countries other
than the U.S.A.))
Center to obtain the recommended ceiling-mount
bracket (sold separately). (AN-XGCM61 ceiling-mount
bracket and its AN-EP101AP extension tube (for
U.S.A.), or AN-NV6T ceiling-mount bracket and its AN-
TK201/AN-TK202 extension tubes (for countries other
than the U.S.A.))
• When the projector is in the inverted position, use the
upper edge of the screen as the base line.
• Use the projector’s menu system to select the
appropriate projection mode. (See page
51
for use
of this function.)
Ceiling-mount Projection
Image Projection
E-31
Operation Buttons
Selecting the Input Signal Source
Using the Operation Buttons
Press INPUT 1.2.3 or INPUT 4.5 on the projector or
INPUT (1, 2, 3, 4 or 5) on the remote control to change
the mode.
INPUT (1, 2, 3, 4 or 5) on the remote control to change
the mode.
• When no signal is received, “NO SIGNAL” will be displayed.
When a signal that the projector is not preset to receive is
received, “NOT REG.” will be displayed.
received, “NOT REG.” will be displayed.
INPUT 1 Mode
INPUT 2 Mode
INPUT 3 Mode
INPUT 4 Mode
INPUT 5 Mode
On-screen Display
Projector
Remote control
INPUT
Adjusting the Volume
Press VOLUME
ⴑ/ⴐ to adjust the volume.
On-screen Display
Projector
Remote control
Muting the Sound
Press MUTE to temporarily turn off the sound.
Press MUTE again to turn the sound back on.
Press MUTE again to turn the sound back on.
Projector
On-screen Display
Remote control
MUTE
VOLUME
E-32
Operation Buttons
This function can be used to superimpose a black
screen over the projected image.
screen over the projected image.
Blacking out the Projected Image
Press BLACK SCREEN. The screen turns black and
“BLACK SCREEN” is displayed on the screen. To return
to the original projected image, press BLACK SCREEN
again.
“BLACK SCREEN” is displayed on the screen. To return
to the original projected image, press BLACK SCREEN
again.
Superimposing a Black Screen
Projector
Projected Image
sg
Displaying a Still Image
This function allows you to instantly freeze a moving
image. This is useful when you want to display a still
image from a computer or video, giving you more time
to explain the image to the audience.
You can also use this function to display a still image
from a computer while you make preparations for the
next computer images to be presented.
image. This is useful when you want to display a still
image from a computer or video, giving you more time
to explain the image to the audience.
You can also use this function to display a still image
from a computer while you make preparations for the
next computer images to be presented.
On-screen Display
Remote control
BLACK
SCREEN
Projector
Remote control
FREEZE
1
Press FREEZE to freeze the image.
2
Press FREEZE again to return to the moving image.
E-33
Operation Buttons
Magnifying a Specific Portion of an Image
This function allows you to magnify a specific portion of
an image. This is useful when you want to display a
detailed portion of the image.
an image. This is useful when you want to display a
detailed portion of the image.
1
Press ENLARGE (
) to zoom in. (Press ENLARGE
(
) to zoom out.)
ⴒ1
ⴒ4
ⴒ9
ⴒ16
ⴒ36
ⴒ64
2
To return to
ⴒ1, press UNDO.
• If you press ENLARGE (
) when the zoom is set to
⳯1,
no change will occur. And if you press ENLARGE (
) when
the zoom is set to
⳯64, no change will occur.
• If the input signal is changed during digital image
magnification, the image will return to
⳯1. The input signal
is changed
(a) when INPUT 1, 2, 3, 4 or 5 is pressed,
(b) when the input signal is interrupted, or
(c) when the input resolution and refresh rate changes.
(a) when INPUT 1, 2, 3, 4 or 5 is pressed,
(b) when the input signal is interrupted, or
(c) when the input resolution and refresh rate changes.
Remote control
On-screen Display
⳯4
Press ENLARGE (
)
to zoom in.
Press ∂/ƒ/ß/©.
Pan Around the Screen
Enlarging the screen image and move it around.
When the image is magnified, press ∂/ƒ/ß/© to pan
and scan around the image.
and scan around the image.
UNDO
ENLARGE
∂
/ƒ/ß/©
Click on the first or last page to see other XG-P25XE (serv.man38) service manuals if exist.